10 amp aC/DC pOWER CONVERTER
CONVERTISSEUR DE COURaNT C.a./C.C. 10 ampÈRES
CONVERTIDOR aC/DC DE 10 ampERIOS
Assembly & InstAllAtIon
AssemblAge et InstAllAtIon
montAje e InstAlAcIón
ITEm / aRTICLE / aRTICULO # 55510
www.sunforceproducts.com
Please read these instructions thoroughly prior to installation,
then store in a safe place for future reference. If at any time
you are unclear about this product, or require further assistance
please do not hesitate to contact our trained professionals
operating the customer support line at 1-888-478-6435 (English/
French/Spanish language services, U.S.A. and Canada only),
from Monday to Friday, 8:30 am to 5:00 pm Eastern Standard
Time or email us at info@sunforceproducts.com.
Veuillez lire soigneusement ces instructions avant de commencer
l’installation et conservez-les dans un endroit sûr pour référence ultérieure.
En tout temps, si vous avez des questions au sujet de ce produit ou avez
besoin d’aide, n’hésitez pas à contacter nos professionnels dûment formés
à notre système d’assistance téléphonique au 1-888-478-6435 (anglais /
français / espagnol, aux États-Unis et au Canada seulement) de 8 h 30 à 17 h
du lundi au vendredi, heure normale de l’Est ou par courrier électronique à
info@sunforceproducts.com.
Por favor lea estas instrucciones antes de instalar y luego
guárdelas en un lugar seguro para su referencia. Si tiene
alguna pregunta sobre este producto o requiere asistencia,
contacte a nuestro equipo de profesionales en la línea de
soporte al 1-888-478-6435 (Servicio en Inglés / Francés /
Español, sólo en Estados Unidos y Canadá) 8:30 am - 5 pm
Lunes-Viernes Tiempo del Este o por correo electrónico al
info@sunforceproducts.com.
The converter can be permanently mounted to any at surface.
Rotate outwards the two metal brackets on the underside of the converter to expose the screw holes.
Utilize these two brackets for mounting (screws not included).
mOUNTING INSTRUCTIONS
OpERaTING INSTRUCTIONS
1. Remove all cable ties and uncoil all of the cables before using the AC to DC power
converter.
2. Make sure the power switch of the converter is in the OFF position.
3. Plug the converter into a 110/120V AC standard wall outlet.
Note- The use of an extension cord is not recommended. If you require the use of an
extension cord only use a heavy duty 12 gauge cord less than 50 feet (30.5 meters) long.
4. Insert the 12V DC accessory plug from the device being operated into the converter’s
socket (maximum draw 10 amps or 120 watts). The 12V socket is wired so the center
conductor is positive (+) and the outer sleeve is negative (-).
Note - Always conrm that the 12V plug on your chosen device is wired the same way.
5. Place the converter power switch in the ON position. The Red “Power On” LED will light.
6. Turn on the 12V device being operated.
7. To disconnect, reverse the procedure.
Note - Make sure to let the converter cool completely before storing.
• Read all instructions before operating this converter. Place instructions where they can be used for
future operations.
• The converter will not shut off automatically. Turn off immediately after use.
• Although the converter has a fan, it will get warm with use. Do not place the converter on ammable
materials such as carpeting, upholstery or paper.
• Allow the converter to cool before storing.
• For indoor use only. Ensure the converter is always used or stored in a dry environment.
• Do not put ngers into the 12V receptacle.
• Close supervision is necessary when used around infants, children or anyone incapable of unplugging
the converter.
• Do not use the converter to recharge batteries.
• Unplug the converter when not in use and before cleaning.
• Risk of electric shock, do not immerse the plug or converter in any liquid.
• Do not use the converter if it is wet.
• Do not use the converter with a damaged cord or plug, or if the converter has been damaged in
any way.
• Do not use the converter for anything other than its intended use.
• Do not open the converter.
SaFETY GUIDELINES
SpECIFICaTIONS
If the device is not functioning:
Conrm that the converter’s red “Power On” LED is lit. If not, check to make sure
the AC outlet is receiving power. If the AC outlet has no power, check wall switches,
breakers and fuses.
If the red LED is on and the device is not functioning:
A. Remove, clean and reinsert the device’s 12V plug into the converter’s 12V socket to
ensure a good connection.
B. Verify the device you are looking to use is working by plugging it into a vehicle’s 12V
accessory port.
C. Check the device’s fuse (either in the 12V plug or in the device).
If the red LED is on, but goes out when the device is plugged in:
The converter is overloaded. Check the device’s power consumption requirements.
TROUBLESHOOTING
This product is covered by a one (1) year limited warranty. Sunforce Products Inc.
warrants to the original purchaser that this product is free from defects in materials and
workmanship for the period of one year from date of purchase.
To obtain warranty service please contact Sunforce Products for further instruction, at
1-888-478-6435 or email info@sunforceproducts.com. Proof of purchase including date,
and an explanation of complaint is required for warranty service.
WaRRaNTY
Output: 12V DC – 10 A
(CAUTION: Do not exceed 10 Amps)
Input: 110-120V AC
50/60Hz 3.8A
Page is loading ...
Page is loading ...
/
