6-3/4"
(171mm)
15-9/16"
(396mm)
4-1/2"
(114mm)
8-15/16"
(227mm)
17°
2-1/2" Max
Deck Thickness
2-5/16"
(58mm)
8-1/2"
(216mm)
2-3/16"
(56mm)
1/2"
(13mm)
29-1/2"
(750mm)
10-1/4" x 2-3/8"
(260mm x 60mm)
ESCUTCHEON
10-15/32"
(266mm)
7-7/8"
(200mm)
2-15/16"
74mm
2-25/64"
61mm
Spec i fi ca tions
DESCRIPTION
• Reex™ pulldown system oers smooth operation, easy movement
and secure docking
• Metal construction with various nishes identied by sux
• Duralock® quick connect installation
• PowerClean Spray
• Flexible supply lines with 3/8"CC ttings connect directly to supply stop
• High arc spout provides height and reach to ll or clean large
pots while pull out wand provides the maneuverability for cleaning
or rinsing
• 360˚ rotating spout
OPERATION
• Lever style handle
• Temperature controlled by 100˚ arc of handle travel
• Operates with less than 5 lbs. of force
• Operates in stream or spray mode in the pulldown or retracted position
FLOW
• Flow is limited to 1.5 gpm (5.7 L/min) at 60 psi
CARTRIDGE
• 1255™ Duralast™ cartridge for Single-Handle Faucets
STANDARDS
• Third party certied to IAPMO Green, ASME A112.18.1/CSA B125.1
and all applicable requirements referenced therein including
NSF 61/9 & 372
• Meets CalGreen and Georgia SB370 requirements
• Complies with California Proposition 65 and with the Federal Safe
Drinking Water Act
• The backow protection system in the device consists of two inde
pendently operating check valves, a primary and a secondary which
prevent backow
• ADA for lever handle
WARRANTY
• Lifetime limited warranty against leaks, drips and nish defects
to the original consumer purchaser
• 5 year warranty if used in commercial installations
CRITICAL DIMENSIONS
(DO NOT SCALE)
Edwyn™ Single Handle
Pulldown Kitchen Faucet
Model: 87028 series
NOTE: THIS FAUCET IS DESIGNED TO BE INSTALLED
THRU 1, 2, 3 and 4 HOLE, 1-1/2" (38mm) MIN. DIA.
(1 HOLE FOR SOAP DISPENSER)
FOR MORE INFORMATION CALL: 1-800-BUY-MOEN
www.moen.com
Rev. 5/16
-
1
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI