Moen 87028SRS Dimensions Guide

  • Hello! I am an AI chatbot trained to assist you with the Moen 87028SRS Dimensions Guide. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
6-3/4"
(171mm)
15-9/16"
(396mm)
4-1/2"
(114mm)
8-15/16"
(227mm)
17°
2-1/2" Max
Deck Thickness
2-5/16"
(58mm)
8-1/2"
(216mm)
2-3/16"
(56mm)
1/2"
(13mm)
29-1/2"
(750mm)
10-1/4" x 2-3/8"
(260mm x 60mm)
ESCUTCHEON
10-15/32"
(266mm)
7-7/8"
(200mm)
2-15/16"
74mm
2-25/64"
61mm
Spec i fi ca tions
DESCRIPTION
Reex™ pulldown system oers smooth operation, easy movement
and secure docking
Metal construction with various nishes identied by sux
Duralock® quick connect installation
PowerClean Spray
Flexible supply lines with 3/8"CC ttings connect directly to supply stop
High arc spout provides height and reach to ll or clean large
pots while pull out wand provides the maneuverability for cleaning
or rinsing
360˚ rotating spout
OPERATION
Lever style handle
Temperature controlled by 100˚ arc of handle travel
Operates with less than 5 lbs. of force
Operates in stream or spray mode in the pulldown or retracted position
FLOW
Flow is limited to 1.5 gpm (5.7 L/min) at 60 psi
CARTRIDGE
1255™ Duralast™ cartridge for Single-Handle Faucets
STANDARDS
Third party certied to IAPMO Green, ASME A112.18.1/CSA B125.1
and all applicable requirements referenced therein including
NSF 61/9 & 372
Meets CalGreen and Georgia SB370 requirements
Complies with California Proposition 65 and with the Federal Safe
Drinking Water Act
The backow protection system in the device consists of two inde
pendently operating check valves, a primary and a secondary which
prevent backow
ADA for lever handle
WARRANTY
Lifetime limited warranty against leaks, drips and nish defects
to the original consumer purchaser
5 year warranty if used in commercial installations
CRITICAL DIMENSIONS
(DO NOT SCALE)
Edwyn™ Single Handle
Pulldown Kitchen Faucet
Model: 87028 series
NOTE: THIS FAUCET IS DESIGNED TO BE INSTALLED
THRU 1, 2, 3 and 4 HOLE, 1-1/2" (38mm) MIN. DIA.
(1 HOLE FOR SOAP DISPENSER)
FOR MORE INFORMATION CALL: 1-800-BUY-MOEN
www.moen.com
Rev. 5/16
/