Pyle PDWMKHRD22WM, PDWMKRHD20 User manual

  • Hello! I am an AI chatbot trained to assist you with the Pyle PDWMKHRD22WM User manual. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
www.PyleUSA.com www.PyleUSA.com
1
CONTENTS
IMPORTANT SAFETY INSTRUCTIONS
PACKAGE LIST
FUNCTIONS DESCRIPTIONS
PRODUCTS INSTRUCTIONS
CONNECTIONS INSTRUCTIONS
TROUBLESHOOTING
FCC ADVISORY
PARAMETERS
lmportants Safety Instructions
1. Do not use this device near Water
2. Do not install near any heat sources such as radiators,
heat register, stoves, or other devices that produce heat
3. Do not defy the safety purpose of the polarized
grounding-type plug. A polarized plug has two blades
with one wider than the other. A grounding-type plug
had two blades and a third grounding prong.
The wide blade or third prong is provided for your
safety. lf the provided prong does not t your outlet,
consult an electrician for possible replacement of
obsolete outlet.
4. Portect the power cord from being walked on or
pinched, particularly at plugs, receptacles and or the
point where they exit from the device.
5. Only use attachments accessories specied or
included
6. Unplug this device during lightning storms or when
not in use for prolonged periods
7. Refer any or all servicing to quality service center or
personel. Servicing is required when the device has
been damaged to a point of malfunctions, such as
liquid spillage, exposure to rain, moisture, excessive
heat or dropping of the device.
1
2
3
4-5
6-9
9
10
11
2 11
Package list
1. Main Device (1pc)
2. Wired Mic (2pcs) or Wireless Mic (2pcs)
3. Power Adaptor 1 pc
4. 3. Smm/3. 5mm Audio Cable 1pc
5. 3. 5mm/2RCA Audio Cable 2pcs
6. AA Dry Battery (4pcs) for wireless mic only
PDWMKRHD20 with 2 wired mic
PDWMKHRD22WM with 2 wireless mic
PDWMKHRD22WM PARAMETERS
HDMI input and output: HDMI 1.4
Wireless frequency range: UHF
THD: 0.5%
Signal/Noise ratio: -90dB
Frequency response: 30Hz~18kHz ±3dB
Operating range: Over 100ft
Typical Tone control: ±15dB @ 10kHz
Microphone max. Gain: +26dB
Wired microphone input impedance: 22kΩ
Stereo line input impedance: 10kΩ
Power: 5V DC
UHF Wireless microphone
Transmitting Power: 10dBm
Modulation: FM
Max Modulation: 75 KHz
Spurious Emission: >60dB
Power Supply: 3V (2 'AA' Batteries)
PDWMKRHD20 PARAMETERS
HDMI input and output: HDMI 1.4
THD: 0.5%
Signal/Noise ratio: -90dB
Frequency response: 30Hz~18kHz ±3dB
Typical Tone control: ±15dB @ 10kHz
Microphone max. Gain: +26dB
Wired microphone input impedance: 22kΩ
Stereo line input impedance: 10kΩ
Power: 5V DC
Wired Microphone
Mic Element: Dynamic
Directivity: Uni-directivity
Frequency Response: 60-15KHz
Sensitivity: -75dB±3dB
Impedance: 600Ω
Main Device
Wireless Mic
Wired Mic
User Manual Battery
3.5/3.5mm Cable 3.5/2RCA Cable
www.PyleUSA.com www.PyleUSA.com
10 3
FCC ADVISORY (USA)
1. This equipment has been tested and found to comply with
the limits for a Class B digital device, pursuant to part 15 of
the FCC Rules.These limits are designed to provide
reasonable protection against harmfulinterference in a
residential installation.
This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful
interference to radio communications. However, there is no
guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful
interference to radio or television reception, which can be
determined by turning the equipment o and on, the user
is encouraged to try correcting the problem by one or more
of the following measures:
• Increasing the distance between the radio/TV equipment
and the main device
• Connecting the radio/TV equipment to an outlet on a
dierent circuit than the one into which the receiver is
plugged.
• If necessary, consulting the dealer or an experienced
radio/TV technician for help.
2. IMPORTANT: When connecting the main device to audio
equipment, use only high-quality, shielded cables such as
what is supplied with this product. Follow all installation
instructions and do not modify the equipment in any way,
as this could void your FCC authorization to use the device
in the U.S.
Functions (PDWMKHRD22WM)
HDMI Outputs to connect to LCD TV, Media speaker, etc.
3.5mm stereo outputs to connect to amplier, Computer, etc.
HDMI Inputs to connect to HD player, Set-Top Box, etc.
3.5mm stereo inputs connect to CD player, Smart phone, atc.
Main unit with 2 microphone inputs for wired microphones
Adjustable echo level for all microphones
Adjustable tone control for all microphones
Big rotary knob for control music volume
Front panel with led light, red light to indicate the power
status, blue light to indicate the wireless microphone status.
MIC 1, MIC 2 rotary knob simultaneously control wired
& wireless microphone volume
2 UHF wireless microphones are included, powered by 2pcs
2A battery
Functions (PDWMKRHD20)
HDMI Outputs to connect to LCD TV, Media speaker, etc.
3.5mm stereo outputs to connect to amplier, Computer, etc.
HDMI Inputs to connect to HD player, Set-Top Box, etc.
3.5mm stereo inputs connect to CD player, Smart phone, etc.
Main unit with 2 microphone inputs for wired microphones
Adjustable echo level for all microphones
Adjustable tone control for all microphones
Big rotary knob for control music volume
Front panel with led light, red light to indicate the power
status.
MIC 1, MIC 2 rotary knob simultaneously control wired &
wireless microphone volume
2 wired microphones are included
www.PyleUSA.com www.PyleUSA.com
4 9
PRODUCT INSTRUCTIONS
Front Panel
Rear Panel
7. Connect with HDMI Blue-Ray Player and TV
Troubleshooting
If you are having problems operating the HDMI karaoke
player, or suspects something is wrong with it, please check
the troubleshooting list below to resolve any issues of
incorrect operation. If you suspect an equipment malfunction
and are unable to resolve the problems, please contact the
service center.
1. No light on power indicator
Solutions: Check the power adaptor and cable
2. Power indicator is lit but no sound is present.
Solutions: Check the source device and disable any mute
settings.
3.Sound is harsh or distorted.
Solutions:
Reduce source volume
Change placement angle between Mic and speaker
Change distance between Mic and Speaker
Music Volume
Echo
MIC Volume
Tone
MIC Input
LED
Power Switch
HDMI Input
HDMI Output
3.5mm Input
3.5mm Output
DC: 5V
ON
OFF
MIC 1 MIC 2 POW ER
HDM I IN
HDM I OUT
AUD IO IN
AUD IO OUT
DC 5V
+ -
www.PyleUSA.com www.PyleUSA.com
8 5
Wired Microphone
Wireless Microphone
LED Indicator
ON/MUTE/OFF Battery Lid
ON/OFF Switch
6.35 Plug
Cable (3M)
ON
OFF
MIC 1 MIC 2 POW ER
HDM I IN
HDM I OUT
AUD IO IN
AUD IO OUT
DC 5V
+ -
ON
OFF
MIC 1 MIC 2 POW ER
HDM I IN
HDM I OUT
AUD IO IN
AUD IO OUT
DC 5V
+ -
5. Small Meeting Connection
6.Connect with HDMI Amplier & Notebook
www.PyleUSA.com www.PyleUSA.com
6 7
ON
OFF
MIC 1 MIC 2 POW ER
HDM I IN
HDM I OUT
AUD IO IN
AUD IO OUT
DC 5V
+ -
ON
OFF
MIC 1 MIC 2 POWER
HDM I IN
HDM I OUT
AUD IO IN
AUD IO OUT
DC 5V
+ -
ON
OFF
MIC 1 MIC 2 POW ER
HDM I IN
HDM I OUT
AUD IO IN
AUD IO OUT
DC 5V
+ -
ON
OFF
DVD Video Out
TV Video In
MIC 1 MIC 2 POW ER
HDM I IN
HDM I OUT
AUD IO IN
AUD IO OUT
DC 5V
+ -
3. Connect with TV & DVD player
4. Connect with Mobilephone & MID
Connection instructions
1. PC Karaoke Mode (Desktop PC & Notebook PC)
2. Sound Mode
www.PyleUSA.com www.PyleUSA.com
/