Moen 7460 User manual

Moen
Brand
Moen
Model
7460
Category
Sanitary ware
Type
User manual

This manual is also suitable for

Moen 7460 is a single-handle kitchen faucet made of metal with a chrome-plated finish and has flexible supplies with 3/8" compression fittings. It features a loop-style handle that controls the temperature of the water. The faucet has a flow rate of 2.2 gpm (8.3 L/min) and operates with less than 5 lbs. of force. It also includes a 1225 cartridge design, which is nonmetallic, nonferrous, and made of stainless steel. The faucet is ADA-compliant and complies with various standards, including NSF 61/9 and California Proposition 65.

Moen 7460 is a single-handle kitchen faucet made of metal with a chrome-plated finish and has flexible supplies with 3/8" compression fittings. It features a loop-style handle that controls the temperature of the water. The faucet has a flow rate of 2.2 gpm (8.3 L/min) and operates with less than 5 lbs. of force. It also includes a 1225 cartridge design, which is nonmetallic, nonferrous, and made of stainless steel. The faucet is ADA-compliant and complies with various standards, including NSF 61/9 and California Proposition 65.

CRITICAL DIMENSIONS
(DO NOT SCALE)
S p e c i f i c a t i o n s
FOR MORE INFORMATIONL: 1-800-BUY-MOEN
www.moen.com
DESCRIPTION
• Metal construction with various finishes identified by suffix
• Flexible supplies with 3/8" compression fittings
OPERATION
• Loop style handle
• Temperature controlled by 100˚ arc of handle travel
• Will operate with less than 5lbs. of force
FLOW
• Spout flow is limited to 2.0 gpm (7.6 L/min) at 60 psi
CARTRIDGE
• 1255™ Duralast™ cartridge
STANDARDS
• Third party certified to IAPMO Green, ASME A112.18.1/CSA B125.1
and all applicable requirements referenced therein including NSF
61/9
• Contains no more than 0.25% weighted average lead content
• Complies with California Proposition 65 and with the Federal Safe
Drinking Water Act
• ADA for lever handle
WARRANTY
• Lifetime limited warranty against leaks, drips and finish defects to
the original consumer purchaser
• 5 year warranty if used in commercial installations
CHATEAU®
Single-Handle Kitchen Faucet
Model: 7445 less spray
7460 with spray
Bulk Model: 67445 less spray
67460 with spray
32"
(813mm)
1-1/8" (29mm)
MAX. DECK
THICKNESS
5-7/16" (138mm)
NOMINAL
ESCUTCHEON
10-1/4” x 2-1/4"
8-1/4"
(209mm)
IN OPEN POSITION
(261mm x 58mm)
9-1/8"
(232mm)
6-11/16"
(170mm)
NOTE: DESIGNED TO INSTALL THROUGH
3 HOLES 1-1/4" (32mm) MIN. DIA. AND 4" (102mm)
ON CENTER.
Rev. 2/12
There is more than 1 version of this model.
Page down to identify the version you have.
CRITICAL DIMENSIONS
(DO NOT SCALE)
S p e c i f i c a t i o n s
FOR MORE INFORMATION CALL: 1-800-BUY-MOEN
www.moen.com
DESCRIPTION
• Metal construction with chrome plated finish
• 1/2" IPS connections will accept standard ball nose
connection for 3/8" tubing
OPERATION
• Loop style handle
• Temperature controlled by 180˚ arc of handle travel
• Will operate with less than 5lbs. of force
FLOW
• Aerator is limited to 2.2 gpm max (8.3 L/min)
CARTRIDGE
• 1225 cartridge design (not 1200)
• Nonmetallic/nonferrous and stainless steel material
STANDARDS
• Designed and manufactured to comply to: CSA B-125,
ASME A112.18.1M, ANSI A117.1 and all applicable re quire ments
referenced therein
• Certified to ANSI/NSF 61/9
• Complies with California Proposition 65 and with the Federal Safe
Drinking Water Act
WARRANTY
• Lifetime limited warranty against leaks, drips and finish defects to the
original consumer purchaser
• 5 year warranty if used in commercial installations
ADA
1-1/8" (29mm)
MAX. DECK
THICKNESS
(mounting bracket
open side up)
5-3/16" (132mm)
NOMINAL
ESCUTCHEON
10-1/4” x 2-1/4"
8-5/8"
(220mm)
IN OPEN POSITION
9-1/8"
(232mm)
7-7/8"
(200mm)
6-3/8"
(163mm)
3-3/4"
(95mm)
NOTE: DESIGNED TO INSTALL THROUGH
3 HOLES 1-1/4" (32mm) MIN. DIA. AND 4" (102mm)
ON CENTER.
Rev. 10/05
CHATEAU®
Single-Handle Kitchen Faucet
Model: 7445 less spray
7460 with spray
Bulk Model: 67445 less spray
67460 with spray
  • Page 1 1
  • Page 2 2

Moen 7460 User manual

Moen
Brand
Moen
Model
7460
Category
Sanitary ware
Type
User manual
This manual is also suitable for

Moen 7460 is a single-handle kitchen faucet made of metal with a chrome-plated finish and has flexible supplies with 3/8" compression fittings. It features a loop-style handle that controls the temperature of the water. The faucet has a flow rate of 2.2 gpm (8.3 L/min) and operates with less than 5 lbs. of force. It also includes a 1225 cartridge design, which is nonmetallic, nonferrous, and made of stainless steel. The faucet is ADA-compliant and complies with various standards, including NSF 61/9 and California Proposition 65.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents