Moen 7445 User manual

Category
Sanitary ware
Type
User manual

This manual is also suitable for

CRITICAL DIMENSIONS
(DO NOT SCALE)
S p e c i f i c a t i o n s
FOR MORE INFORMATIONL: 1-800-BUY-MOEN
www.moen.com
DESCRIPTION
Metal construction with various finishes identified by suffix
Flexible supplies with 3/8" compression fittings
OPERATION
Loop style handle
Temperature controlled by 100˚ arc of handle travel
Will operate with less than 5lbs. of force
FLOW
Spout flow is limited to 2.0 gpm (7.6 L/min) at 60 psi
CARTRIDGE
1255™ Duralast™ cartridge
STANDARDS
Third party certified to IAPMO Green, ASME A112.18.1/CSA B125.1
and all applicable requirements referenced therein including NSF
61/9
Contains no more than 0.25% weighted average lead content
Complies with California Proposition 65 and with the Federal Safe
Drinking Water Act
ADA for lever handle
WARRANTY
Lifetime limited warranty against leaks, drips and finish defects to
the original consumer purchaser
5 year warranty if used in commercial installations
CHATEA
Single-Handle Kitchen Faucet
Model: 7445 less spray
7460 with spray
Bulk Model: 67445 less spray
67460 with spray
32"
(813mm)
1-1/8" (29mm)
MAX. DECK
THICKNESS
5-7/16" (138mm)
NOMINAL
ESCUTCHEON
10-1/4” x 2-1/4"
8-1/4"
(209mm)
IN OPEN POSITION
(261mm x 58mm)
9-1/8"
(232mm)
6-11/16"
(170mm)
NOTE: DESIGNED TO INSTALL THROUGH
3 HOLES 1-1/4" (32mm) MIN. DIA. AND 4" (102mm)
ON CENTER.
Rev. 2/12
There is more than 1 version of this model.
Page down to identify the version you have.
CRITICAL DIMENSIONS
(DO NOT SCALE)
S p e c i f i c a t i o n s
FOR MORE INFORMATION CALL: 1-800-BUY-MOEN
www.moen.com
DESCRIPTION
Metal construction with chrome plated finish
1/2" IPS connections will accept standard ball nose
connection for 3/8" tubing
OPERATION
Loop style handle
Temperature controlled by 180˚ arc of handle travel
Will operate with less than 5lbs. of force
FLOW
Aerator is limited to 2.2 gpm max (8.3 L/min)
CARTRIDGE
1225 cartridge design (not 1200)
Nonmetallic/nonferrous and stainless steel material
STANDARDS
Designed and manufactured to comply to: CSA B-125,
ASME A112.18.1M, ANSI A117.1 and all applicable re quire ments
referenced therein
Certified to ANSI/NSF 61/9
Complies with California Proposition 65 and with the Federal Safe
Drinking Water Act
WARRANTY
Lifetime limited warranty against leaks, drips and finish defects to the
original consumer purchaser
5 year warranty if used in commercial installations
ADA
1-1/8" (29mm)
MAX. DECK
THICKNESS
(mounting bracket
open side up)
5-3/16" (132mm)
NOMINAL
ESCUTCHEON
10-1/4” x 2-1/4"
8-5/8"
(220mm)
IN OPEN POSITION
9-1/8"
(232mm)
7-7/8"
(200mm)
6-3/8"
(163mm)
3-3/4"
(95mm)
NOTE: DESIGNED TO INSTALL THROUGH
3 HOLES 1-1/4" (32mm) MIN. DIA. AND 4" (102mm)
ON CENTER.
Rev. 10/05
CHATEA
Single-Handle Kitchen Faucet
Model: 7445 less spray
7460 with spray
Bulk Model: 67445 less spray
67460 with spray
  • Page 1 1
  • Page 2 2

Moen 7445 User manual

Category
Sanitary ware
Type
User manual
This manual is also suitable for

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI