2. Home
  3. Domestic appliances
  4. Sanitary ware
  5. Moen
  6. 67445

Moen 67445, 67460, 7445, 7460 User manual

  • Hello! I am an AI chatbot trained to assist you with the Moen 67445 User manual. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
  • What kind of connections does the Moen 7460 have?
    What is the maximum deck thickness for installation?
    What is the flow rate of the faucet?
    What kind of cartridge does the faucet use?
    What kind of handle does the faucet have?
    What is the warranty for the Moen 7460?
    Does the faucet comply with any standards?
CRITICAL DIMENSIONS
(DO NOT SCALE)
S p e c i f i c a t i o n s
FOR MORE INFORMATIONL: 1-800-BUY-MOEN
www.moen.com
DESCRIPTION
• Metal construction with various finishes identified by suffix
• Flexible supplies with 3/8" compression fittings
OPERATION
• Loop style handle
• Temperature controlled by 100˚ arc of handle travel
• Will operate with less than 5lbs. of force
FLOW
• Spout flow is limited to 2.0 gpm (7.6 L/min) at 60 psi
CARTRIDGE
• 1255™ Duralast™ cartridge
STANDARDS
• Third party certified to IAPMO Green, ASME A112.18.1/CSA B125.1
and all applicable requirements referenced therein including NSF
61/9
• Contains no more than 0.25% weighted average lead content
• Complies with California Proposition 65 and with the Federal Safe
Drinking Water Act
• ADA for lever handle
WARRANTY
• Lifetime limited warranty against leaks, drips and finish defects to
the original consumer purchaser
• 5 year warranty if used in commercial installations
CHATEAU®
Single-Handle Kitchen Faucet
Model: 7445 less spray
7460 with spray
Bulk Model: 67445 less spray
67460 with spray
32"
(813mm)
1-1/8" (29mm)
MAX. DECK
THICKNESS
5-7/16" (138mm)
NOMINAL
ESCUTCHEON
10-1/4” x 2-1/4"
8-1/4"
(209mm)
IN OPEN POSITION
(261mm x 58mm)
9-1/8"
(232mm)
6-11/16"
(170mm)
NOTE: DESIGNED TO INSTALL THROUGH
3 HOLES 1-1/4" (32mm) MIN. DIA. AND 4" (102mm)
ON CENTER.
Rev. 2/12
There is more than 1 version of this model.
Page down to identify the version you have.
CRITICAL DIMENSIONS
(DO NOT SCALE)
S p e c i f i c a t i o n s
FOR MORE INFORMATION CALL: 1-800-BUY-MOEN
www.moen.com
DESCRIPTION
• Metal construction with chrome plated finish
• 1/2" IPS connections will accept standard ball nose
connection for 3/8" tubing
OPERATION
• Loop style handle
• Temperature controlled by 180˚ arc of handle travel
• Will operate with less than 5lbs. of force
FLOW
• Aerator is limited to 2.2 gpm max (8.3 L/min)
CARTRIDGE
• 1225 cartridge design (not 1200)
• Nonmetallic/nonferrous and stainless steel material
STANDARDS
• Designed and manufactured to comply to: CSA B-125,
ASME A112.18.1M, ANSI A117.1 and all applicable re quire ments
referenced therein
• Certified to ANSI/NSF 61/9
• Complies with California Proposition 65 and with the Federal Safe
Drinking Water Act
WARRANTY
• Lifetime limited warranty against leaks, drips and finish defects to the
original consumer purchaser
• 5 year warranty if used in commercial installations
ADA
1-1/8" (29mm)
MAX. DECK
THICKNESS
(mounting bracket
open side up)
5-3/16" (132mm)
NOMINAL
ESCUTCHEON
10-1/4” x 2-1/4"
8-5/8"
(220mm)
IN OPEN POSITION
9-1/8"
(232mm)
7-7/8"
(200mm)
6-3/8"
(163mm)
3-3/4"
(95mm)
NOTE: DESIGNED TO INSTALL THROUGH
3 HOLES 1-1/4" (32mm) MIN. DIA. AND 4" (102mm)
ON CENTER.
Rev. 10/05
CHATEAU®
Single-Handle Kitchen Faucet
Model: 7445 less spray
7460 with spray
Bulk Model: 67445 less spray
67460 with spray
/