Marantz DV7001 User manual

Model DV7001 User Guide

Super Audio CD/DVD Player

CLASS 1 LASER PRODUCT

LUOKAN 1 LASERLAITE

KLASS 1 LASERAPPARAT

2

CONGRATULATIONS

ON YOUR PURCHASE OF THIS

FINE MARANTZ PRODUCT.

MARANTZ is on the leading edge of DVD research for

consumer products and this unit incorporates the latest

technological developments.

We are sure you will be fully satisﬁ ed with the DVD player.

Thank you for your support.

This product incorporates copyright protection technol-

ogy that is protected by methods claims of certain U.S.

patents and other intellectual property rights owned by

Macrovision Cor po ra tion and other rights owners.

Use of this copyright protection technology must be

au tho rized by Macrovision Cor po ra tion, and is in tend ed

for home and other limited viewing uses only unless oth-

er wise authorized by Macrovision Corporation.

Reverse en gi neer ing or disassembly is pro hib it ed.

Operating Environment

Operating environment temperature and humidity:

+5°C to +35°C (+41°F to +95°F); less than 85%RH

(cooling vents not blocked)

Do not install in the following locations

÷

Location exposed to direct sunlight or strong artiﬁ cial

light

÷

Location exposed to high humidity, or poorly ven ti lat ed

lo ca tion

NOTE:

Changes or mod i ﬁ ca tions not expressly approved by the

party responsible for compliance could void the user’s au-

thority to operate the equipment.

Please read through these operating instructions so you

will know how to operate your model properly. After you

have ﬁ nished reading the instructions, put them away in

a safe place for future reference.

CAUTION

VISIBLE AND INVISIBLE LASER RADIATION WHEN OPEN AVOID

EXPOSURE TO BEAM (WARNING LOCATION: INSIDE ON LASER

COVERSHIELD)

CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK,

DO NOT REMOVE COVER (OR BACK)

NO USER-SERVICEABLE PARTS INSIDE

REFER SERVICING TO QUALIFIED SERVICE PERSONNEL

The lightning flash with arrowhead symbol within

an equilateral triangle is intended to alert the user

to the presence of uninsulated "dangerous voltage"

within the product’s enclosure that may be of suffi-

cient magnitude to constitute a risk of electric shock

to persons.

CAUTION:

TO PREVENT ELECTRIC SHOCK, MATCH WIDE

BLADE OF PLUG TO WIDE SLOT, FULLY INSERT.

ATTENTION:

POUR ÉVITER LES CHOCS ÉLECTRIQUES,

INTRODUIRE LA LAME LA PLUS LARGE DE LA FICHE DANS

LA BORNE CORRESPON-DANTE DE LA PRISE ET POUSSER

JUSQU’AU FOND.

WARNING

TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK,

DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.

LASER SAFETY

This unit employs a laser. Only a qualified service person should remove

the cover or attempt to service this device, due to possible eye injury.

CAUTION :

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

The exclamation point within an equilateral triangle

is intended to alert the user to the presence of

important operating and maintenance (servicing)

instructions in the literature accompanying the

product.

USE OF CONTROLS OR ADJUSTMENTS OR

PERFORMANCE OF PROCEDURE OTHER THAN

THOSE SPECIFIED HEREIN MAY RESULT IN

HAZARDOUS RADIATION EXPOSURE.

Copy protection

Many DVD discs are encoded with copy pro tec tion. Because

of this, you should only connect your DVD player directly to

your TV, not to a VCR. Connecting to a VCR results in a dis-

torted picture from copy-protected DVD discs.

3

English

Important Safety Instructions

1) Read these instructions.

2) Keep these instructions.

3) Heed all warnings.

4) Follow all instructions.

5) Do not use this apparatus near water.

6) Clean only with dry cloth.

7) Do not block any ventilation openings, Install in

accordance with the manufacturer’s instructions.

8) Do not install near any heat sources such as radiators,

heat registers, stoves or other apparatus (including

ampliﬁ ers) that produce heat.

9) Do not defeat the safety purpose of the polarized or

grounding-type plug. A polarized plug has two blades

with one wider than the other. A grounding type plug

has two blades and a third grounding prong. The wide

blade or the third prong are provided for your safety. If

the provided plug does not ﬁ t into your outlet, consult an

electrician for replacement of the obsolete outlet.

10) Protect the power cord from being walked on or pinched

particularly at plugs, convenience

receptacles, and the point where

they exit from the apparatus.

11) Only use attachments/accessories

speciﬁ ed by the manufacturer.

12) Use only with the cart, stand, tripod,

bracket, or table speciﬁ ed by the

manufacturer, or sold with the apparatus. When a cart

is used, use caution when moving the cart/apparatus

combination to avoid injury from tip-over.

13) Unplug this apparatus during lightning storms or when

unused for long periods of time.

14) Refer all servicing to qualiﬁ ed service personnel.

Servicing is required when the apparatus has been

damaged in any way, such as power-supply cord or

plug is damaged, liquid has been spilled or objects

have fallen into the apparatus, the apparatus has been

exposed to rain or moisture, does not operate normally,

or has been dropped.

Additional Safety Information!

• This product should not be placed in a built-in installation

such as a bookcase or rack unless proper ventilation is

provided or the manufacturer’s instructions have been

adhered to.

• Apparatus shall not be exposed to dripping or splashing

and that no objects ﬁ lled with liquids, such as vases,

shall be placed on the apparatus.

• When the switch is in the OFF position, the apparatus

isn’t completely switched-off from the MAINS.

4

WARRANTY

For warranty information, contact your local Marantz dis-

trib u tor.

RETAIN YOUR PURCHASE RECEIPT

Your purchase receipt is your permanent record of a valua-

ble purchase. It should be kept in a safe place to be referred

to as necessary for insurance purposes of when corre-

sponding with Marantz.

IMPORTANT

When seeking warranty service, it is the responsibility of the

consumer to es tab lish proof and date of purchase. Your pur-

chase receipt or invoice is adequate for such proof.

FOR U.K. ONLY

This undertaking is in addition to a con sum er’s statutory

rights and does not affect those rights in any way.

CE marking (for Europe only)

This product is in conformity with the

EMC directive and low-voltage directive.

Disc Storage

Be careful not to harm the disc because the data on these

discs is highly vulnerable to the environment.

• Do not keep under direct sunlight.

• Keep in a cool ventilated area.

• Store vertically.

• Keep in a clean protection jacket.

Maintenance of Cabinet

For safety reasons, be sure to disconnect the AC power cord

from the AC outlet.

• Do not use benzene, thinner, or other solvents for clean-

ing.

• Wipe the cabinet with a soft cloth.

WARNINGS

- Do not expose the equipment to rain or mois-

ture.

- Do not remove the cover from the equipment.

- Do not insert anything into the equipment

through the ventilation holes.

- Do not handle the mains cord with wet hands.

- Do not cover the ventilation with any items

such as ta ble cloths, news pa pers, curtains, etc.

- No naked ﬂ ame sources, such as lighted can-

dles, should be placed on the equipment.

- When disposing of used batteries, please

comply with gov ern men tal regulations or en vi -

ron men tal public in struc tion’s rules that apply

in your country or area.

FCC NOTE (for U. S. A only):

This equipment has been tested and found to comply with

the limits for a Class B digital device, pursuant to Part 15

of the FCC rules. These limits are designed to provide

reasonable protection against harmful interference in a

residential installation. This equipment generates, uses

and can radiate radio fre quen cy energy and, if not installed

and used in accordance with the in struc tions, may cause

harmful in ter fer ence to radio communications. However,

there is no guarantee that interference will not occur in a

particular installation. If this equipment does cause harmful

interference to radio or television reception, which can be

de ter mined by turning the equipment off and on, the user is

encouraged to try to correct the interference by one or more

of the following measures.

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and re-

ceiver.

• Connect this equipment into an outlet on a circuit differ-

ent from that to which the receiver is con nect ed.

• Consult the dealer or an experienced radio/TV technician

for help.

NOTE: Changes or modiﬁ cations may cause

this unit to fail to comply with Part 15 of the

FCC Rules and may void the user’s authority to

operate the equipment.

This Class B digital apparatus complies with

Canadian ICES-003.

Cet appareil numérique de la Classe B est

conforme á la norme NMB-003 du Canada.

This product satisﬁ es FCC regulations when shielded cables

and connectors are used to connect the unit to other equip-

ment. To prevent electromagnetic interference with electric

ap pli anc es, such as radios and televisions, use shielded

cables and connectors for connections.

A NOTE ABOUT RECYCLING

This product’s packaging materials are

re cy cla ble and can be reused. This prod uct

and the ac ces so ries packed together are the

ap pli ca ble prod uct to the WEEE di rec tive ex cept

bat ter ies.

Please dispose of any materials in ac cor dance

with your local recycling reg u la tions.

When discarding the unit, comply with your lo cal

rules or reg u la tions.

Batteries should never be thrown away or

in cin er at ed but dis posed of in ac cor dance with

your local regulations con cern ing chemical

wastes.

- Make a space of about 0.1 meter around the

unit.

- No objects ﬁ lled with liquids, such as vases,

shall be placed on the equipment.

- When the switch is in the OFF position, the

equipment is not completely switched off from

MAINS.

- The equipment shall be installed near the

power supply so that the power supply is

easily accessible.

5

English

Table Of Contents

1 Before You Start

Features.......................................................................................6

What’s in the box......................................................................7

Putting the batteries in the remote control........................7

Using the remote control .......................................................7

Discs compatible with this player.........................................8

DVD-Video regions...................................................................9

General information.................................................................9

MP3 compatibility information .............................................9

WMA compatibility information............................................9

JPEG compatibility information .............................................9

DivX compatibility information .............................................9

2 Connecting Up

Easy setup................................................................................10

Home theater video connections .......................................11

Home theater audio connections.......................................12

3 Controls & Displays

Front panel...............................................................................13

Remote control .......................................................................14

4 Getting Started

Playing discs ............................................................................16

Basic playback controls.........................................................16

Resuming playback from the last stopped point.............16

Navigating DVD disc menus.................................................17

Navigating Video CD PBC menus.......................................17

5 Playing Discs

Introduction.............................................................................18

Preview function......................................................................18

Fast Forward/Fast Reversed................................................. 20

Still Frame/Slow Play/Frame Advance Playback...............21

Using the page....................................................................... 22

Using the Repeat Play .......................................................... 22

Looping a section of a disc ................................................. 23

Using the Random (SHUFFLE) Play................................... 23

Switching Camera Angles..................................................... 24

Switching the Subtitle Language ....................................... 24

Switching the Audio Language ......................................... 25

Switching the audio channel............................................... 25

Switching Super Audio CD Playback layer....................... 25

Switching Super Audio CD Playback area........................ 25

Using the Zoom Function.................................................... 25

Play back Information........................................................... 26

Playing an MP3/DivX/JPEG/Windows Media

™

Audio disc ............................................................................... 29

Playing a JPEG image ﬁ le (slide show) .............................. 30

Playing MP3/WMA music and JPEG pictures

simultaneously.........................................................................31

Playing a DivX disc................................................................ 32

Using the Setup Menu ......................................................... 33

6 DVD Setup Menu

Using the FL menu................................................................. 34

Setting up the GENERAL SETUP page.............................. 36

Setting up the AUDIO SETUP page.................................. 39

Setting up the VIDEO SETUP page................................... 44

Setting up the PREFERENCE page..................................... 50

7 Additional Information

Language Codes .................................................................... 54

Handling discs........................................................................ 55

Storing discs........................................................................... 55

Discs to avoid......................................................................... 55

Cleaning the pickup lens...................................................... 55

Problems with condensation............................................... 55

Hints on installation.............................................................. 56

Moving the player.................................................................. 56

Precautions on using the power cord............................... 56

Tr oubleshooting..................................................................... 57

Speciﬁ cations ......................................................................... 60

Before You Start1

6

Features

An HDCP-compatible HDMI*

1

terminal is provided for fully digital

transmission that ensures the very

highest picture and digital sound

quality.

This unit comes with a High-Deﬁ nition

Multimedia Interface (HDMI) jack; an

extended DVI interface for next-generation

televisions. This interface allows transfers

of uncompressed digital video and digital

audio (audio streams such as Dolby Digital

and DTS as well as linear PCM) with a

single connector. HDMI standard Ver. 1.1

compatibility means the unit can also

transfer DVD-Audio multi-channel audio

over HDMI.

End-to-end full-digital transfers with all

digital processing allow the enjoyment

of realistic video without any image

degradation caused by AD/DA conversions.

And the unit can up-convert 480p video

signals to 720p, 1080i, and 1080p video

output signals using the scaling function

and the HDMI jack (see pages 11, 47).

High quality 12-bit/216 MHz Video

D/A converter*

2

The unit uses a Video D/A converter that

per forms D/A conversion of all video

signals in 12-bits and can perform 8x over-

sampling to let you enjoy beautiful video

possible with DVD. Furthermore, NSV

technology sup press es noise during DA

conversion.

DCDi *

3

DCDi (Directional Correction

Deinterlacing) computes and tracks the

angle of the screen edge to ﬁ ll in the

missing pixels on the TV screen. DCDi

signiﬁ cantly optimizes the image quality,

especially during slow motion playback.

This function is available only for

progressive scan output.

High quality 24-bit/192 kHz DAC

The high speciﬁ cation 24-bit/192 kHz DAC

delivers dynamic, smooth and expansive

analog sound from CDs and DVDs.

Superlative audio performance with

Super Audio CD, DVD-Audio, Dolby*

4

Digital and DTS*

5

software

Logos:

The DV7001 delivers breathtaking sound

quality with Super Audio CD, DVD-Audio,

Dolby Digital and DTS discs.

DivX *

6

You can enjoy DivX

®

ﬁ les which are

recorded on DVD

±

R/RW or CD-R/RW.

Plays DivX5.2, DivX4, DivX3 and DivX

VOD Video content (see pages 29, 32).

• This player supports Quarter Pixel.

• This player supports GMC.

MP3 and WMA*

7

compatibility

This player is compatible with CD-R, CD-

RW and CD-ROM discs that contain MP3

and WMA audio tracks (see pages 29, 31 ).

JPEG compatibility

This player is compatible with CD-R, CD-

RW and CD-ROM discs that contain JPEG

data (see pages 29, 30, 31).

*

1

HDMI, the HDMI logo and High-Deﬁ nition

Multimedia Interface are trademarks or registered

trademarks of HDMI Licensing LLC.

*

2

“NSV” is a registered trademark of Analog Device

Co. Ltd.

*

3

“DCDi” is a registered trademark of Faroudja, a

division of Genesis Microchip, Inc.

*

4

Manufactured under license from Dolby

Lab o ra to ries. “Dolby” “Pro Logic” and the

double-D symbol are trademarks of Dolby

Lab o ra to ries.

*

5

“DTS” and “DTS Digital Surround” are registered

trade marks of DTS, Inc.

*

6

“DivX”, and “DivX Ultra” Certiﬁ ed, and associated

logos are trademarks of DivX, Inc. and are used

under license.

*

7

Windows Media and the Windows logo are

trademarks, or registered trademarks of Microsoft

Corporation in the United States and/or other

countries.

1Before You Start

7

English

What’s in the box

Thank you for buying this MARANTZ

prod uct. Please conﬁ rm that the following

accessories are in the box when you open

it.

• Remote control

• AAA/R03 dry cell batteries x2

• Audio/Video cable (yellow/red/white)

• System control cable

• Power cable

• User Guide (this manual)

• Warranty card

Putting the batteries in the remote

control

1 Open the battery

compartment cover on

the back of the re mote

control.

2 Insert two AAA/R03

bat ter ies into the battery

compartment following

the indications (

ª

,

·

)

inside the compartment.

3 Close the cover.

Note

Incorrect use of batteries can result in hazards such

as leakage and bursting. Please ob serve the following:

• Don’t mix new and old batteries together.

• Don’t use different kinds of battery together.

Although they may look similar, different batteries

may have different voltages.

• Make sure that the plus and minus ends of each

battery match the indications in the battery

compartment.

• Remove batteries from equipment that isn’t going

to be used for a month or more.

When disposing of used batteries, please comply

with governmental regulations or environmental

bylaws that apply in your country or area.

Using the remote control

Keep in mind the following when using the

remote control:

• Make sure that there are no obstacles between

the remote control and the remote sensor on the

unit.

• Use within the operating range and angle, as

shown.

• Remote operation may become unreliable if

strong sunlight or ﬂ uorescent light is shining on

the unit’s remote sensor.

• Remote controllers for different devices can

interfere with each other. Avoid using remotes for

other equipment located close to this unit.

• Re place the batteries when you no tice a fall off in

the operating range of the remote control.

Note

• When using this player independently, set the

REMOTE CONTROL switch on the rear panel to

INT. (INTERNAL) (see page 10).

30

5m (16 feet)

Before You Start1

8

Discs compatible with this player

Any disc that displays one of the following

logos should play in this player. Other

formats, including DVD-RAM, DVD-ROM,

CD-ROM (except those that contain MP3/

DivX/WMA/JPEG ﬁ les) and Photo CD will

not play.

DVD-Video compatibility:

• Logos:

• Single-sided or double-sided discs

• Single layer or dual layer discs

• Dolby Digital, DTS, MPEG or Linear PCM digital

audio

• MPEG-2 digital video

Discs are generally divided into one or more titles.

Titles may be further subdivided into chapters.

DVD-Audio compatibility:

• Logos:

• Single sided discs

• Single layer or dual layer discs

• Linear or packed PCM digital audio

• Some discs may contain MPEG-2 video, and

Dolby Digital, DTS or MPEG digital audio

Discs are generally divided into one or more groups.

Groups may be further subdivided into tracks.

DVD-R compatibility:

This unit can play DVD-R discs. Please note the

fol low ing points when using these discs:

• Logo:

• This unit can play DVD-R discs recorded as DVD-

Video format.

DVD-RW compatibility:

This unit can play DVD-RW discs. Please note the

fol low ing points when using these discs:

• Logo:

• This unit can play DVD-RW discs recorded as

DVD-Video format, and DVD-VR format.

• DVD-RW discs that were recorded with copy-

once only permission can be played.

DVD+R/+RW compatibility:

• Logo:

• This unit can play DVD+R/+RW discs. Please

note the followings points when using these

discs.

Super Audio CD compatibility:

• Logo:

• Single layer, dual layer or Hybrid layer

• 12cm (5in.) or 8cm (3in.) discs

• Digital audio (DSD)

Super Audio CDs are divided into tracks.

Audio CD compatibility:

• Logos:

• 12cm (5in.) or 8cm (3in.) discs

• Linear PCM digital audio

• Audio CD, CD-R* and CD-RW* formats

CDs are divided into tracks.

*This unit can play CD-R and CD-RW discs recorded

in Audio CD or Video CD format, or with MP3 audio

ﬁ les or Windows Media audio ﬁ les or picture ﬁ les or

DivX ﬁ les.

*Some copy-controlled CDs may not conform to

ofﬁ cial CD standards. They are special discs and may

not play on the DV7001.

*The DV7001 does not support the non-DVD side

of a Dual Disc.

Video CD compatibility:

• Logo:

• 12cm (5in.) or 8cm (3in.) discs

• MPEG-1 digital audio

• MPEG-1 digital video

Video CDs are divided into tracks.

Super VCD compatibility:

• Logo:

• 12cm (5in.) or 8cm (3in.) discs

• MPEG-1 digital audio

• MPEG-2 digital video

Super VCDs are divided into tracks.

1Before You Start

9

English

DVD-Video regions

All DVD-Video discs carry a region mark

on the case somewhere that indicates

which region(s) of the world the disc is

com pat i ble with. Your DVD player also has

a region mark, which you can ﬁ nd on the

rear panel. Discs from incompatible regions

will not play in this player. Discs marked

ALL will play in any player.

General information

• This player can recognize in total about 650 ﬁ les

per folders and 300 folder per disc for MP3/

DivX/WMA.

• When writing MP3/WMA/JPEG/DivX ﬁ les to CD-

R/RW discs, always be sure to set the writing

format to ISO 9660 Level 1.

• For MP3 and WMA ﬁ les recorded in Variable Bit

Rate (VBR), the unit may not display the actual

elapsed time.

MP3 compatibility information

• Files should be MPEG1 Audio Layer 3 format.

The sampling rate is 8 kHz to 48 kHz, but it is

depends on the bit rate. Incompatible ﬁ les will

not play.

• Audio encoded at 128 kbps should sound close

to regular audio CD quality. Although this player

will play 32 kbps to 320 kbps, but it is depends

on the sampling rate.

• This player is compatible with ID3 ver.1.1 Tag.

But the information display on the display on the

Front panel and TV screen is only ID3 ver. 1.0

Tag.

• Maximum 30 characters can be displayed on the

display on the Front panel and TV screen.

• This player cannot play DVD-R/RW discs with

recorded MP3 music data.

• This player only plays tracks that are named

containing the ﬁ le extension “.mp3” or “.MP3”.

• This player is not compatible with multi-session

discs. If you try and play a multi-session disc,

only the ﬁ rst session will be played.

WMA compatibility information

• The sampling rate is 44.1 kHz (bit rate: 64

kbps-192 kbps) and 48 kHz (bit rate: 128

kbps-192 kbps).

• This player only plays tracks that are named with

the ﬁ le extension “.wma” or “.WMA”.

• This player can not play the disc contents

protected by Windows Media Digital Right

Management (DRM).

JPEG compatibility information

• While this player is designed to be able to

handle image data recorded in JPEG format,

no assurances are given that the player will be

able to display image data recorded in all JPEG

formats.

• This player can not display progressive JPEG

images.

• This player can not display HD JPEG images.

• Always be sure to specify a ﬁ le extension of “.JPG”

or “JPEG” for JPEG ﬁ les. The ﬁ le will not be able

to be displayed if a ﬁ le extension other than “.JPG”

or “JPEG” is speciﬁ ed or if no ﬁ le extension is

assigned to the ﬁ le. (Note that this means that

JPEG ﬁ les created on a Macintosh will not be able

to be displayed as is.)

• Depending on the ﬁ le size and compression

ratio, some JPEG pictures cannot be displayed

correctly.

DivX compatibility information

• A ﬁ le with an extension of “.avi” or “.divx” is called

a DivX ﬁ le.

• Maximum 30 characters can be displayed on the

display on the Front panel and TV screen.

• Maximum 4 Gbyte of ﬁ le size can be displayed.

• File should be MPEG1 Audio Layer 3 format and

MPEG2 format.

Caution!

• DVD

±

R/RW and CD-R/RW discs recorded using

a per son al computer or a DVD or CD recorder

may not play if the disc is damaged or dirty, or if

there is dirt or condensation on the player’s lens.

• If you record a disc using a personal computer,

even if it is recorded in a compatible format,

there are cases in which it may not play because

of the settings of the application software used

to create the disc. (Check with the software

publisher for more detailed in for ma tion.)

• There may be times when it is impossible

to replay a CD-R/RW disc because of the

characteristics of the disc being used or because

of dirt or scratches on the disc.

• Unﬁ nalized DVD-R/RW discs cannot be played.

• Unﬁ nalized CD-R/RW discs cannot be played.

• For more information on using DVD-R/RW and

CD-R/RW discs, see “Handling discs” on page

55.

• Never try to replay anything other than a music

CD (CDA format) or a CD-R/RW on which MP3

and/or JPEG ﬁ les have been stored. Depending

on the type of ﬁ le, there may be times when

doing so will result in problems or erroneous

operation.

Connecting Up2

10

Connecting audio/video cables

Be sure to insert each

plug fully for the best

con nec tion. The plugs

and jacks are color-cod ed

to make con nec tion

easier.

Connecting system control cables

By connecting this DVD player to another

Marantz audio component using a supplied

system control cable, you can remotely

operate the components as a single system.

• When con nect ing to a com po nent with a

remote sensor, be sure to connect the REMOTE

CON TROL IN jack of this DVD player to

the REMOTE CON TROL OUT jack of the

com po nent with the remote sensor.

• When connecting to component which is

not equipped with a remote sensor, be sure

to connect the com po nent to the REMOTE

CONTROL OUT jack of this DVD player.

Easy setup

This easy setup is the minimum set of

connections you need to start watching

DVD-Video discs. Both sound and picture

are fed directly to your TV using the

sup plied audio/video cables. For other

possible con nec tions, see pages 11 and 12 .

Important

• Before making or changing any rear panel

connections, make sure that all components are

switched off and unplugged from the wall outlet.

• While a connected component is turned on,

do not unplug the power cord of this DVD

player from the wall outlet. The speaker may be

damaged.

Note

• When connecting to a standard TV, select

4:3 LETTER BOX or 4:3 PAN SCAN in the TV

Aspect setting (see page 45).

• Connect the video output of the player directly

to your TV. Because the player is de signed

to support an Analog Protection System copy

protection there are cases when proper playback

will not be possible if the player is connected to

the TV through a VCR and images are recorded

and played on the VCR.

• The player’s video output and S1 output are not

be progressive.

•

Remote switch

When using this DVD player independently, set

this switch to INT. (INTERNAL). When using this

DVD player in a system with a Marantz receiver

equipped with a remote sensor, set the switch to

EXT. (EXTERNAL). Change the switch setting

using a pen with a sharp tip etc.

•

Flasher Input

This is used when controlling components

from different rooms with a keypad or other

input device. Set the remote switch to EXT.

(EX TER NAL) when using a ﬂ asher input.

A/V EUROCONNECTOR

INT.

EXT.

REMOTE

CONTROL

OUT IN

RS-232C

HDMI

Ver 1.1

FLASHER IN

AC IN

LRLR

CENTER

SUB WOOFER

SURR.LSURR.R

MIXED

2CH

COAX.

OPT.

FRONT

AUDIO OUT

Y

/P

C

BB

C

R

/P

R

COMPONENT

S1

1

VIDEO

2

VIDEO OUT

DIGITAL

OUT

2

1

3

EXT.

INT.

Connect to a composite video

input on your TV using the

supplied Audio/Video cable.

Plug into a standard

AC wall outlet.

Connect to a pair of stereo audio

inputs on your TV using the

sup plied Audio/Video cable. You

can connect a subwoofer to the

SUBWOOFER Jack.

RS-232C terminal/

FLASHER IN

Control terminal for use by

custom installers.

See Note:

Remote Switch

2Connecting Up

11

English

A/V EUROCONNECTOR

INT.

EXT.

REMOTE

CONTROL

OUT IN

RS-232C

HDMI

Ver 1.1

FLASHER IN

AC IN

LRLR

CENTER

SUB WOOFER

SURR.LSURR.R

MIXED

2CH

COAX.

OPT.

FRONT

AUDIO OUT

Y

/P

C

BB

C

R

/P

R

COMPONENT

S1

1

VIDEO

2

VIDEO OUT

DIGITAL

OUT

1

4

3

2

Home theater video con nec tions

This player outputs video in a number

of different ways. Choose the one most

suit able for your system using the guide

below.

Connecting SCART (for Europe only)

and S-Video cables

SCART and S-Video cables will only plug in

one way, so make sure the plug is correctly

lined up with the jack before inserting. Be

sure to fully insert for a good con nec tion.

Note

• The A/V EURO CONNECTOR can output

com pos ite or RGB component video. If you

connect just one TV, use the A/V EURO

CONNECTOR. You can select the type of video

output by changing the COMPONENT setting in

the DVD Setup Menu (page 49).

S-Video or composite video?

S-Video should give a better picture, so if

you have an S-Video input, use it. S-Video

cables are available from any good audio/

visual dealer.

Connecting HDMI cables

With an HDMI cable, both uncompressed

video data and digital audio data (e.g.,

LPCM or bit stream data such as Dolby

Digital, DTS, MPEG data or DVD Audio

Multi channel) can be trans mit ted with just

a single connector.

By transmitting DVD image data directly as

digital data without it being ﬁ rst converted

into analog format, it becomes possible to

provide the very ﬁ nest in image quality (see

pages 6, 41, 42, 47).

Note

• The HDMI output of this unit can be con nect ed

to a DVI jack on a TV or other device using a

conversion adapter. In this case, it is necessary

to use a TV or display with an HDCP-com pat i ble

DVI input.

• There may be no image output if con nect ed to

a TV or display that is not com pat i ble with the

above format.

• Refer to the instruction manual of the TV or

display to be connected to this unit for detailed

information regarding the HDMI terminal.

• When connecting a progressive input TV with the

component output of the player, select ON in

the Progressive setting (see page 45).

If your TV has a component video input, we

rec om mend using it to connect directly to the

COM PO NENT VIDEO OUT of this player. Use

the standard 3-jack component video output.

If a component input is not

available to you, connect this

player to your TV or AV receiver

using either the VIDEO or S1

jacks.

Plug into a standard

AC wall outlet.

If your TV and projector have

a HDMI terminal for Video and

Audio Input, we recommend

using it to connect directly to

the HDMI out of this player.

If your TV has a SCART input, we

rec om mend using it to connect directly

to the A/V EURO CONNECTOR on

this player. (for Europe only)

Important

• Before making or changing any rear panel

connections, make sure that all components are

switched off and unplugged from the wall outlet.

• While a connected component is turned on,

do not unplug the power cord of this DVD

player from the wall outlet. The speaker may be

dam aged.

Connecting Up2

12

A/V EUROCONNECTOR

INT.

EXT.

REMOTE

CONTROL

OUT

IN

RS-232C

HDMI

Ver 1.1

FLASHER IN

AC IN

LRLR

CENTER

SUB WOOFER

SURR.LSURR.R

MIXED

2CH

COAX.

OPT.

FRONT

AUDIO OUT

Y

/P

C

BB

C

R

/P

R

COMPONENT

S1

1

VIDEO

2

VIDEO OUT

DIGITAL

OUT

2

4

3

1

COAX

Connecting analog audio cables

Be sure to fully insert each plug for the

best con nec tion. The plugs and jacks are

color-coded to make con nec tion easier.

Connecting coaxial cables

Use an interconnector with a pin-type

(also called RCA

or phono) plug on

each end to connect

up digital coaxial-

type jacks. Make

sure that the plug is

pushed fully home.

Connecting optical cables

Optical intercon-

nects only plug in

one way, so make

sure the plug is

correctly lined up

with the jack before

in sert ion. When

in sert ing the plug,

Home theater audio connections

This player outputs multi-channel audio

in digital form. Check the manual for your

ampliﬁ er/receiver to see what equipment it

is com pat i ble with (especially which digital

formats such as Dolby Digital, DTS, etc. It

can decode).

Important

• Before making or changing any rear panel

connections, make sure that all com po nents are

switched off and unplugged from the wall outlet.

• While a connected component is turned on,

do not unplug the power cord of this DVD

player from the wall outlet. The speaker may be

damaged.

If your ampliﬁ er has stereo inputs

only, connect them here. You

can connect a subwoofer to the

SUBWOOFER Jack.

Connect to the coaxial or

optical input of your ampliﬁ er

if it has digital inputs.

Plug into a standard

AC wall outlet.

the pro tec tive shutter will open and you

should hear it click into po si tion when fully

in sert ed. Be careful that you do not force

the plug, because this could result in dam-

age to the protective shutter, the cable, or

the unit itself.

Note

• If you listen to mul ti chan nel DVD-Audio through

one of the digital outputs, it will be downmixed

to stereo. Also, high sampling rate DVD-Audio

(192 kHz or 176.4 kHz) will be downsampled

to 96 kHz, 88.2 kHz, 48 kHz or 44.1 kHz,

depending on the disc. Multi channel and high

sampling rate DVD-Audio are only available

through the analog outputs.

• All DVD-Audio and all Super Audio CD audio are

output only through the analog outputs. (see

page 40)

OPT

If your ampliﬁ er has 5.1 channel analog

inputs, connect them here. Connect to the

L (left)/R (right), SURR.L/.R (SURROUND

L/R), CENTER and SUB WOOFER inputs

of your ampliﬁ er.

3Controls & Displays

13

English

Front panel

1 STANDBY indicator

• Lights when the unit is in standby.

2 Disc tray

• Place the disc here.

3

(PLAY)

• Begins playing the disc play.

4

7

(STOP)

• Stops playing the disc play.

5

8

(PAUSE)

• Pauses playing the disc play.

6 POWER ON/OFF

• Press to turn the power on, and press it again to

turn the power off.

7 AUDIO EX indicator

• Lights when the AUDIO EX is activated using the

AUDIO EX button on the remote control.

• The sound quality of analog audio output is

improved by turning off analog video signal

output and the front panel display.

• It is applied to CDDA, Super Audio CD, DVD

Audio and DTS CD in Play mode.

8 Display

• Operation indications are displayed here.

9 HDMI indicator

• When the connected device is HDMI/DVI

compatible, the light ﬂ ashes red.

10 AUDIO EX

• Press to turn AUDIO EX off and on.

• HDMI video output cannot be switched off.

11 HDMI – page 47

• The HDMI on/off state toggles when pressed

for three seconds or more. When on, the HDMI

indicator is lit.

• Pressing this button while HDMI is enabled

displays the current resolution. Pressing this

button again while the resolution is dis played

allows you to select the resolution in the

se quence below:

480p

Æ

576p

Æ

720p

Æ

10 8 0i

Æ

10 8 0p

Æ

480p

12

0

(OPEN/CLOSE)

• Press to open and close the disc tray.

13

4

/

1

• Press to skip reverse title/group, chapter, or track.

You can also press and hold this button for Fast

Reversed.

14

¡

/

¢

• Press to skip forward title/group, chapter, or

track. You can also press and hold this button for

Fast Forward.

STANDBY

PAUSE

HDMIAUDIO EX.

OPEN/CLOSE

STOPPLAY

POWER

ON/OFF

SUPER AUDIO CD/DVD PLAYER DV7001

GRP GRP

TITLE

kHz

96

CHP ALL

A-B

PROG

TOTAL SUB

PCM

AWS

MPEQ

BTSTM

MP3

MAPAUDIO

COND

DOWN MIX

VCD

SACD

V-PART

THX

SRS TS

P

R

G

S

V

E

D

O

L

B

Y

D

LFE

C

R

L

S

LS

RS

O OFF

VO

F

101TEXT

1

23456789 1211 1413 1615 1817 2019

kHz

192

PMM

STEREO MULTI

6

4

5

2

1

8

3

9

7

0

=

~

!

-

Controls & Displays3

14

Remote control

1 AUDIO EX – Press to turn AUDIO EX off

and on

• The sound quality of analog audio output is

improved by turning off analog video signal

output and the front panel display.

• HDMI video output cannot be switched off.

2 OPEN/CLOSE – Disc tray open/close –

page 16

3 ZOOM – pages 25, 30

4 HDMI – page 47

• The HDMI on/off state toggles when pressed

for three seconds or more. When on, the HDMI

indicator is lit.

• Pressing this button while HDMI is enabled

displays the current resolution. Pressing this

button again while the resolution is dis played

allows you to select the resolution in the

se quence below:

480p

Æ

576p

Æ

720p

Æ

1080i

Æ

10 8 0p

Æ

480p

1

2

3

4

5

6

7

8

~

-

=

0

9

_

#

$

%

^

&

*

(

)

@

!

™

¡

+

5 REPEAT – pages 22, 29

A–B – page 23

6 ANGLE – pages 24, 30

7 INPUT (

%

/

ﬁ

) button – These buttons

can switch between devices compatible with

MARANTZ receivers. Refer to the receiver

instruction manual for further details.

•

Applicable models: PM-11S1, PM-15S1,

PM6001, PM7001, PM8001, SR9600.

(These models may not be handled depending on

the area.)

Non-applicable models: MARANTZ Ampliﬁ ers

and receivers which had released before 2006,

including PM-14, PM-17 and PM4001 except

above models.

8

4

(PREV.)/

¢

(NEXT)– Skip – pages

16, 17, 19, 20, 29, 30, 52

•

Allows you to search forward/backward through a

disc. Use to skip the title, chapter or track.

•

Press and hold (

4

) for Fast Reversed.

•

Press and hold (

¢

) for Fast Forward.

9 SCAN – pages 18, 19

10 TOP MENU (TOP-M)/RETURN – page 17

11 Cursor (

2

/

3

/

5

/

∞

) / ENTER button

12 DISPLAY (DISP.) – page 26

13 DISC SKIP – It is not used on this set.

14 POWER – Switches the player on or into

standby – page 16

15 SOUND MODE– Selects Audio out mode

and change the Super Audio CD Play back

area – pages 25, 39

16 PAGE – Turns the pages of DVD-Audio still

pictures – page 22

17 RANDOM – page 23

18 A U D I O – Changes the Hybrid Super Audio

CD Play back layer – page 25

19 SUBTITLE – pages 24, 32

20 VOLUME (

5

/

∞

) button –

These buttons

can adjust the volume of devices compatible

with MARANTZ receivers. Refer to the

receiver instruction manual for further details.

21 MUTE button – This button can activate

the mute function of devices compatible with

MARANTZ

receivers. Refer to the receiver

instructions for further details.

22

3

(PLAY) – pages 16, 20, 21, 29, 31, 32

23

8

(PAUSE) – pages 16, 21

24

7

(STOP) – pages 16, 30, 31, 33, 50

25 MENU – pages 17, 19, 24

26 SETUP – pages 33, 36, 39, 44, 50

27 Number buttons

3Controls & Displays

15

English

Note

• HDMI ON is set when the unit is shipped from

the factory.

• Set HDMI under the DVD Setup Menu to use

HDMI functions (see pages 41, 42, 47).

• This remote control supports two remote control

codes: DVD1 and DVD2.

• When the unit is shipped from the factory, the

remote control is set to DVD1.

• To set the remote control to DVD2, hold down

both

7

(STOP) button and 2 number button on

the remote control for at least ﬁ ve seconds. (If

the batteries in the remote control are replaced

while the remote control is set to DVD2, the

setting will revert to DVD1.)

• To set the remote control back to DVD1, hold

down both

7

(STOP) button and the 1 number

button on the remote control for at least ﬁ ve

seconds.

• Also set the REMOT CODE on the FL menu to

the same setting as the remote control. (This

setting is set to DVD1 when the unit is shipped

from the factory.) (see page 34)

Getting Started4

16

Playing discs

The basic playback controls for playing

discs are cov ered here. Further func tions

are detailed in the next chapter.

Note

•

Throughout this manual, the term “DVD” means

DVD-Video, and DVD

±

R/RW. If a function is speciﬁ c

to a par tic u lar kind of DVD disc, it is speciﬁ ed.

1 Switch the player on.

If you are playing a DVD or Video CD, also turn on

your TV and make sure that it is set to the correct

video input.

2 Press OPEN/CLOSE to open the disc tray.

3 Load a disc.

Load a disc with the label side facing up, using the

disc tray guide to align the disc (if you’re loading

a double-sided DVD disc, load it with the side you

want to play face down).

4

Press

3

(PLAY) to start playback.

If you are playing a DVD or Video CD, a menu may

appear (see page 17).

Note

•

For one-sided, two-layer discs containing movies, etc.,

there may be a short image stoppage at the point

where the layers change. This is not a malfunction.

•

Depending on the DVD or VIDEO CD, some

operations may be different or restricted.

Basic playback controls

Button What it does

3

Starts playback.

In title menu, it functions as the Enter

key.

8

Pauses a disc that’s playing.

Each time the button is pressed, a new

frame will appear.

7

Stops playback.

4

•

Skips to the start of the current track or

chapter, then to previous tracks/chapters.

•

Press and hold for Fast Reversed.

¢

•

Skips to the next track or chapter.

•

Press and hold for Fast Forward.

Numbers

Playback starts from the selected track/

chapter number.

ENTER Select the current menu option.

Resuming playback from the last

stopped point

This DVD system is able to resume disc

playback from its last stopped point (only

possible for the last 10 discs that were

recorded without a menu).

1 Load one of the last 10 discs played.

2

While “LOADING” appears on the display

panel, press PLAY

3

to

start playback from

the last stop point.

To cancel the resume mode

•

Press

7

twice.

Important

While using the DVD playback controls, you may see

the mark displayed on-screen. The mark means

that the operation is not allowed by the player and

disc.

4

Getting Started

17

English

Navigating DVD disc menus

Many DVD discs contain menus. Sometimes

these are displayed automatically when you

start playback; others only appear when you

press MENU or TOP-M.

Note

• Some DVD-Audio discs feature a “Bonus Group”. To

access this group you have to input a password that

you can ﬁ nd on the disc’s packaging (see page 36).

Button What it does

TOP-M Displays the “top menu” of a DVD disc. This

varies with the disc.

MENU Displays a DVD disc menu—this varies with

the disc and may be the same as the “top

menu”.

RETURN Returns to the previously displayed menu

screen.

Cursor Moves the cursor around the screen.

(

2

/

3

/

5

/

∞

)

ENTER Selects the current menu option.

Numbers Selects a numbered menu option

(some discs only).

Navigating Video CD PBC menus

Some Video CDs have menus from which you

can choose what you want to watch. These

are called PBC (Playback control) menus.

Press the MENU to turn the PBC function on

or off.

Note

• Some discs don’t allow PBC menus.

Button What it does

RETURN Displays the PBC menu.

Numbers Selects a numbered menu option.

ENTER Selects the current menu option.

4

Displays the previous menu page

(if there is one).

¢

Displays the next menu page

(if there is one).

Playing Discs5

18

Introduction

• Many of the functions covered in this

chapter apply to DVD discs, Video CDs

and CDs, although the exact operation

of some varies slightly with the kind of

disc loaded.

• When playing DVD discs, if the

icon

appears on-screen when you try to use

a particular function, either the player

or the disc doesn’t allow the use of that

function.

• When playing Video CDs, some of the

functions are not available in PBC mode.

If you want to use them, press the

MENU to turn the PBC function off (see

page 17).

Preview function

DVD

Video-CD

SVCD

CD

1 Press SCAN.

SVCD VCD

SELECT DIGEST TYPE

TRACK DIGEST

DISC INTERVAL

TRACK INTERVAL

DVD-Video

SELECT DIGEST TYPE

TITLE DIGEST

CHAPTER DIGEST

TITLE INTERVAL

CHAPTER INTERVAL

DVD-Audio

SELECT DIGEST TYPE

GROUP DIGEST

TRACK DIGEST

GROUP INTERVAL

TRACK INTERVAL

2 Use the

5

/

∞

keys to select one of the

following options and press ENTER.

This option is only available during playback mode.

• TRACK/TITLE/CHAPTER/GROUP DIGEST

– View six different TRACK/TITLE/CHAPTER/

GROUP on one screen each time. This allows you

to have a quick glance at all the TRACK/TITLE/

CHAPTER/GROUP on the disc.

• DISC/TITLE/GROUP INTERVAL – View the

whole disc in six thumbnail pictures. It divides

a disc into six portions at regular intervals and

displays them on one screen.

• TRACK/CHAPTER INTERVAL – View the

content of a single TRACK/CHAPTER in six

thumbnail pictures. It divides a single TRACK/

CHAPTER into six portions at regular intervals

and displays them on one screen.

• Use (

2

/

3

/

5

/

∞

) to select a track or

use the numeric buttons to enter the

selected track number.

5

Playing Discs

19

English

• To go to the previous or next page, press

4

/

¢

.

• Press ENTER on the selected thumbnail

picture to start playback from there.

• To return to the main menu, select MENU

on the screen and press ENTER.

3 To exit the preview menu, select EXIT on

the screen and press ENTER.

For CD

• At stop mode, press SCAN on the remote

control. Each track will be played for a few

seconds.

Note

• You can select “Track Interval

”

only during playback

with PBC off.

• Some discs don’t allow the Scan mode.

Playing Discs5

20

Fast Forward/Fast Reverse

DVD

Super Audio CD

Video-CD

CD

MP3

DivX

WMA

The video images on DVD and VCD can be

viewed as a Fast Forward and Fast Reverse

with no sound.

In case of CD, the sound can be listened as a

Fast Forward and Fast Reverse with sound.

Viewing in Fast Forward/Fast Reversed

Press and hold

¢

(NEXT) during play.

• Fast Forward is engaged.

• During Fast Forward, the speed of play

back can be adjusted from x2 speed to

x32 speed in 5 steps using

¢

(NEXT).

Press and hold

4

(PREV) during play.

• Fast Reverse is engaged.

• During Fast Reverse, the speed of play

back can be adjusted from x2 speed to

x32 speed in 5 steps using

4

(PREV).

To return to normal play back press

3

(PLAY)

to normal play back.

Note

• The sound is muted during fast forward/reverse

scanning of DVD/VCD/Super Audio CD.

Page is loading ...

Marantz DV7001 User manual

This manual is also suitable for

Marantz DV7001 User manual

Related papers

Other documents