Philips 20HF5335D,26HF5335D, 32HF5335D User manual

- 1 -

Hospitality Television

20/26/32HF5335D

15/20HF5234

- 2 -

Installation of your Philips Hotel TV

1. Introduction

This addendum has been designed to help you install programmes on this Digital TV and activating the hotel

mode.

Use this addendum in conjunction with the User Manual of this television.

Please handle the TV with care and wipe with a soft cloth to ensure your TV keeps looking new.

2. The benefits of the Philips hotel TV

This TV is specially designed for hotels. The Philips hotel TV offers all kind of features to

Maximise the convenience for the hotel and meet the needs for the guest

 Welcome message to give a friendly welcome to your guest when activating the tv

 Remote control features like low battery detection and an anti-theft screw for preventing of theft for

batteries

 Access to the user menu can be blocked. This prevents users (e.g. guests) from deleting or changing

program settings and/or modifying picture and sound settings. This ensures that TVs are always set up

correctly.

 A

switch-on

volume and programme can be selected. After switching on, the TV will always start on the

specified program and volume level.

 The maximum volume can be limited in order to prevent disturbance.

 The television keys VOLUME +/- , PROGRAM +/- and MENU can be blocked.

 Screen information can be suppressed.

 Programmes can be blanked

3. Installing the channels

Installing Digital Programs (only applicable for 20/26/32HF5335D)

Ensure the TV is in Digital mode. If it is in Analogue mode, press the A/D (Analogue/Digital) key on the

Remote Control to enter the Digital mode.

1. Press the

(Menu Digital) key on the Remote Control

2. Press the Up/Down Arrow Key to scroll to the item called INSTALLATION and press the Right Arrow

Key

3. Press the Up/Down Arrow Key to scroll to the item called SERVICE SETUP and press the Right Arrow

Key

4. Press the Up/Down Arrow Key to scroll to the item called REINSTALL ALL SERVICES and press the Right

Arrow Key

5. Press the Up/Down Arrow Key to scroll to the item called SEARCH and press OK to start the scan.

The

TV will now start to scan and install all available (Digital) TV channels and Radio stations automatically.

When the scan is completed, the TV menu will indicate the number of digital services found.

6. Press the OK key again to Store all the services that have been found.

- 3 -

Installing Analogue Programs

Ensure the TV is in Analogue mode. If it is in Digital mode, press the A/D (Analogue/Digital) key on the

Remote Control to enter the Analogue mode.

1. Press the

(Menu TV) key on the Remote Control

2. Press the Up/Down Arrow Key to scroll to the item called INSTALL and press OK

3. Press the Up/Down Arrow Key to scroll to the item AUTO STORE and press OK

The TV will now start to scan and install all available (Analogue) TV channels automatically. This operation will

take a few minutes. The TV display will show the progress of the scan and the number of programmes found.

Refer to the chapter on

Automatic Tuning of Analogue Programmes

in the User Manual for more details. You

can also refer to the chapter on

Manual Tuning of Analogue Programmes

in the User Manual if a manual scan is

preferred.

4. Activating the Hotel Mode Setup menu (BDS)

1. Switch on the television and select an analogue channel

2. On the Remote Control, press keys: [3, 1, 9, 7, 5, 3, MUTE]

3. The BDS HOTEL MODE SETUP MENU becomes visible

4. Use the cursor keys to select and change any of the following settings:

Function Possible selections

BDS MODE ON /OFF

SWITCH ON SETTINGS

SWITCH ON VOLUME 0-100, LAST STATUS

MAXIMUM VOLUME 0-100

SWITCH ON CHANNEL USER DEFINED, LAST STATUS

POWER ON ON/STANDBY/LAST STATUS

DISPLAY MESSAGE ON/OFF

WELCOME MESSAGE LINE 1/LINE 2/CLEAR

CONTROL SETTINGS

LOCAL KEYBOARD LOCK ON/OFF/ALL

REMOTE CONTROL LOCK ON/OFF

OSD DISPLAY ON/OFF

HIGH SECURITY MODE ON/OFF

AUTO SCART ON/OFF

MONITOR OUT ON/OFF

BLANK CHANNEL ON/OFF

STORE >

5. Select “STORE” and press [CURSOR RIGHT] to save the settings and exit BDS Hotel Mode

setup. Press [MENU] to exit without saving.

6. For BDS Hotel Mode settings to take effect, you must turn the TV set Off, then back On.

BDS Hotel Mode Functions

This paragraph describes the functionality of each item in the BDS Hotel Mode Setup menu.

BDS MODE

ON BDS Hotel Mode is ON:

 The user menu is blocked.

 All settings of the Hotel Mode Setup menu are in effect.

- 4 -

OFF BDS Hotel Mode is OFF:

 The TV operates as a normal consumer TV

SWITCH ON VOL

When the user switches the TV ON, it will play at the specified volume level. There are 2 options:

 LAST STATUS Upon start-up, the TV volume will be set to the level before the TV set was

last turned off.

 USER DEFINED As specified by installer

Remark: “SWITCH ON VOL” cannot exceed the MAXIMUM VOL level. This is the volume level with which

the Hotel Mode Setup menu was entered.

MAXIMUM VOL

The TV Volume will not exceed the selected volume level.

SWITCH ON CHANNEL

When the user switches the TV ON, it will tune to the specified channel. There are 2 options:

 LAST STATUS The TV will switch on to the last channel that was shown before the TV set

was turned off

 USER DEFINED Any analogue channel can be chosen to be the first channel to switch on

POWER ON

The Power On function allows the TV to enter a specific mode of operation (On or Standby) after the mains

power is activated.

ON When set, the TV will always turn ON after the mains power is enabled.

STANDBY When set, the TV will always turn to STANDBY after mains power is enabled

LAST STATUS When set, the TV will always turn to the last power status before the mains power was

disabled.

DISPLAY MESSAGE

ON Enables display of the Welcome Message for 30 seconds after the TV set is turned on

OFF Disables the display of the Welcome Message.

If OSD DISPLAY is set to OFF, then the Welcome Message is automatically disabled.

WELCOME MESSAGE

The Welcome Message function allows the TV to show a customized greeting to the hotel guest whenever the

TV is switched on. This helps to personalize the hotel experience for guests.

The Welcome Message can consist of 2 lines of text, with each line containing a maximum of 20 alphanumeric

characters. Use the Remote Control arrow keys to create the Welcome Message.

To enable the display of the Welcome Message, the DISPLAY MESSAGE option must be ON

To clear the Welcome Message from the TV’s memory, select CLEAR

LOCAL KEYBOARD LOCK

ON The television keys VOLUME +/-, PROGRAM +/- and MENU are blocked.

OFF The television keys VOLUME +/-, PROGRAM +/- and MENU function normally

ALL The television keys VOLUME +/-, PROGRAM +/-, MENU and POWER are blocked.

REMOTE CONTROL LOCK

ON Standard Remote Control keys are disabled.

OFF All Remote Control keys will function normally.

OSD DISPLAY

ON Normal screen information is displayed (e.g. programme information)

OFF Screen information is suppressed.

- 5 -

HIGH SECURITY MODE

ON Allows access to the BDS Hotel Mode Setup Menu via the special BDS Setup Remote only.

(RC2573/01)

OFF Allows access to the BDS Hotel Mode Setup Menu via BDS Setup Remote or via normal Remote

Control (using special key code sequence).

AUTO SCART

The Auto Scart function enables auto-detection of AV devices that are connected to the TV’s Scart connector.

ON Enables Auto Scart switching in BDS Hotel Mode.

OFF Disables Auto Scart switching in BDS Hotel Mode.

MONITOR OUT

ON Allows audio & video output from TV via relevant AV connectors (if available).

OFF Disables both Audio & Video output from the TV (to prevent illegal copying).

BLANK CHANNEL

The Blank Channel function disables the display of video on the TV, but does not affect the audio output. This

function can be used for audio applications (example: Off-air radio transmission, music channels, and so on),

which do not necessarily require the display of video.

ON The current programme is blanked

OFF The current programme is not blanked (normal visible; DEFAULT value)

BLANK CHANNEL can be set for every channel. Use [P+ / P-] to go through all the programmes and set the

desired status per channel. The programme number is visible in the top left corner.

Low Battery Check

This television set has a special feature which checks the battery power level of a TV Remote Control, and

indicates if the battery is low and requires changing.

(Note: The Low Battery Check function works only with certain models of Remote Controls. Please check

with the Philips sales representative if the Remote Control used with this TV supports this function)

To activate the Low Battery Check function, hold the TV Remote Control in front of the TV, and press and

hold the OK button on the Remote Control for at least 5 seconds. A message will appear on the TV screen to

indicate if the battery power level is OK, or if it is Low. If the message indicates that the battery level is low, it

is recommended to change the batteries of the Remote Control immediately.

5. Cloning of settings

Cloning of analogue TV channels and TV settings as described in the chapter

Hotel Mode Set-up menu

For 15/20HF5234

o Wireless cloning with the SmartLoader 22AV1120 or 22AV1135

o Cloning off all adjustable TV settings + analogue channel table

For 20/26/32HF5335D

o Wired cloning with the SmartLoader 22AV1135 using the wire packed with the SmartLoader

o Cloning off all adjustable TV settings + analogue channel table (digital channel table via automatic

installation)

Instruction for cloning of settings between TVs

Philips SmartLoader (22AV1135/00)

The Philips SmartLoader is an installation tool especially designed for easy and fast installation and copying of

TV settings on Philips Institutional TV’s.

- 6 -

The Philips SmartLoader works in 2 modes – Wireless and Wired:

Wireless mode ---- through infrared sensor (15/20HF5234)

Switch the SmartLoader to “Wireless” mode by sliding the side-switch to the icon on the SmartLoader

device. Point the Wireless SmartLoader to the TV’s infrared receiver (optimal distance of 5-30cm) and proceed

with the Installation procedure listed below.

Wired mode ---- using the by-packed accessory cable(s) (20/26/32HF5335D)

Switch the SmartLoader to “Wired” mode by sliding the side-switch to the icon on the SmartLoader

device.

Examine the rear connectors of the TV set to determine if the 3-pin or 4-pin female connector wire (packed

with the Wireless SmartLoader) should be used. Plug in the correct connector wire to the corresponding

opening on the TV set (usually marked as SERV C), and then connect the RJ11 jack end of the accessory wire

to the RJ11 socket on the SmartLoader.

The Installation Procedure consists of three simple steps:

1. Choosing a Master TV

The Master TV is the TV set whose installation and configuration settings are to be copied into other TV’s (of

the same type only).

2. Programming the SmartLoader with the settings from the Master TV

Follow these steps to program the SmartLoader with the settings of the Master TV.

a) Wireless method

 Set the SmartLoader to “Wireless” mode using the side switch.

 Turn on the TV, and while holding the SmartLoader, point it in the direction of the

TV. Press the “MENU” Key on the SmartLoader.

b) Wired method

 Connect the SmartLoader to the TV using the appropriate accessory cable.

 Set the SmartLoader to “Wired” mode using the side switch.

 Turn on the TV, and while holding the SmartLoader, point it in the direction of the

TV. Press the “MENU” Key on the SmartLoader.

The Master TV will show the following menu:

SMARTLOADER TO TV >

TV TO SMARTLOADER >

On the TV screen, highlight the menu option “TV TO SMARTLOADER”

Press the right arrow key on the SmartLoader to start the programming process

A number display (from 0~100) will be shown on screen, indicating the percentage of the programming

progress from the TV to the SmartLoader. When the programming is completed, “##” will show “100” and the

message “DONE” will appear.

TV TO SMARTLOADER ## (0-100)

The SmartLoader is programmed and can be used to install and configure other TVs.

Copying the settings of the Master TV to other TVs with the SmartLoader

Follow these steps to install and configure the settings of a Philips TV with the SmartLoader.

- 7 -

a) Wireless method

 Set the SmartLoader to “Wireless” mode using the side switch.

 Turn on the TV, and while holding the SmartLoader, point it in the direction of the

TV. Press the “MENU” Key on the SmartLoader.

b) Wired method

 Connect the SmartLoader to the TV using the appropriate accessory cable.

 Set the SmartLoader to “Wired” mode using the side switch.

 Turn on the TV, and while holding the SmartLoader, point it in the direction of the

TV. Press the “MENU” Key on the SmartLoader.

On the TV screen, highlight the menu option “SMARTLOADER TO TV”

Press the right arrow key on the SmartLoader to initiate the copying process

> A number display (from 0~100) will be shown on screen, indicating the percentage of the installation

progress from the SmartLoader to the TV. When the data transfer is completed, “##” will show “100” and

the message GOODBYE will appear.

SMARTLOADER TO TV ## (0-100)

> The TV will go to Standby mode. When the TV is next powered on, it will be configured with the settings

from the Master TV, and ready for use.

Problems and Solutions:

1.

The message “I2C ERROR” is displayed on the screen.

 Bad connection of RJ11 wire or wrong data transmission has occurred. Try again.

2.

The message “WRONG VERSION” is displayed on the screen.

 The program contained in the SmartLoader has a software code incompatible with the actual TV.

Reprogram the Wireless SmartLoader from a Master TV whose software code is compatible with the

actual TV.

3.

TV doesn’t respond to the SmartLoader.

 Check if the LED on the SmartLoader lights up in green when pressing any button.

If the LED is red, it means that the batteries are low and should be replaced.

 Bring the SmartLoader closer to the TV infrared receiver and try again.

Notes:

 Make sure that the 3 R6/AA sized batteries are placed correctly in the bottom compartment of the

SmartLoader. The LED on the SmartLoader should light up in green when pressing any button, indicating

operational batteries. When the LED shows red, the batteries need to be replaced.



The SmartLoader can only copy the settings between 2 TVs of the same type. Once the

SmartLoader is programmed with the settings from a Master TV of a certain type or model,

then these settings can be installed on another TV of the same model only.



The SmartLoader cannot be used to copy the (digital) channel table of a Digital TV set.



If the SmartLoader is used with a DVB (European Digital) TV set, then the TV set must first

be switched to Analog mode.

- 8 -

Specifications are subject to change without notice

Trademarks are property of Koninklijke Philips Electronics N.V. or their respective owners.

Disposal of your old product.

Y

our product is designed and manufactured with high quality materials and

components, which can be recycled and reused. When this crossed-out wheeled bin

symbol is attached to a product it means the product is covered by the European

Directive 22002/96/EC. Please find out more about the separate collection system for

electrical and electronic products in your local neighborhood.

Please act according to your local rules and do not dispose of your old products with

your normal household waste. The correct disposal of your old product will help

prevent potential negative consequences for the environment and human health.

T

he packaging of this product is intended to be recycled. Apply to the

local authorities for correct disposal.

www.philips.com/support

EN USER MANUAL

Country Number Tariff

Austria 0820 901114 €0.20/min

Belgium 070 222 303 €0.17/min

Chech Rep 800142840 free

Denmark 3525 8759 local

Finland 09 2311 3415 local

France 08 9165 0005 €0.23/min

Germany 0180 5 356 767 €0.12/min

Greece 0 0800 3122 1280 free

Hungary 0680018189 free

Ireland 01 601 1777 local

Italy 199 404 041 €0.25/min

Luxemburg 40 6661 5644 local

Netherlands 0900 8407 €0.20/min

Norway 2270 8111 local

Poland 0223491504 local

Portugal 2 1359 1442 local

Slovakia 0800004537 free

Spain 902 888 784 €0.15/min

Sweden 08 5792 9100 local

Switzerland 0844 800 544 local

UK 0906 1010 016 £0.15/min

www.philips.com/support

Model

Serial

Product information

• The Model and Serial number can be

found at the rear and the left hand

underside of your television set and

on the packaging.

• Standby Power Consumption for this set

is less than 1 W.

• Power Consumption of the set can found

on the type plate at the rear of the TV.

• For more speciﬁcations of the product

see the product leaﬂet on www.philips.

com/support.

Note

Specifications and information are

subject to change without notice.

• If you need further assistance, please call

the customer support service in your

country. The corresponding telephone

numbers and addresses are given in the

supplied Worldwide guarantee booklet.

Important

• AC3 (an audio format) is not supported

for this set. Use the key on the

remote control to select an alternative

audio.

• Some TV antennas require power from

the TV set. This set does not support such

a feature.

Recycling

The packaging of this product is intended to

be recycled. Apply to the local authorities for

correct disposal.

Disposal of your old product

Your product is designed and manufactured

with highly quality material and components,

which can be recycled and reused. When this

crossed-out wheeled bin symbol is attached

to a product, it means the product is covered

by the European Directive 2002/96/EC.

Please inform yourself about the local

separate collection system for electrical and

electronic products. Please act according to

your local rules and do not dispose your old

products with your normal household waste.

The correct disposal of your old product will

help prevent potential negative consequences

for the environment and human health.

Disposal of batteries

The batteries supplied do not contain the

heavy metals mercury and cadmium. Please

check on how to dispose exhausted

batteries according to local regulations.

Left hand

underside

of TV

Rear

of

TV

1

Table of contents

1 Introduction............................... 3

1.1 Important Information....................... 3

1.1.1 Stationary images on the TV screen

................................................................. 3

1.1.2 Electric, Magnectic and

electromagnectic Fields (“EMF”)..... 3

1.2 What is digital TV?.............................. 4

1.3 Digital or Analogue channels?.......... 4

2 Safety.......................................... 5

2.1 General.................................................. 5

2.2 Care of the screen.............................. 5

3 Overview of the television keys

and connectors.......................... 6

3.1 Side controls. ...................................... 6

3.2 Rear connectors.................................. 6

3.3 Side connectors.................................. 6

4 Getting started..........................7

4.1 Before you start................................... 7

4.2 Connect the antenna.......................... 7

4.3 Connect the mains.............................. 7

4.4 Switching on the TV............................7

4.5 Using the remote control. ................7

5 Remote control functions.........8

6 Overview of Digital main menu

and sub-menus...........................10

7 Switching on the TV for the

ﬁrst time.................................... 13

8 Understanding the information

on the banner............................ 14

8.1 Banner description.............................. 14

8.2 Symbols description............................ 14

9 Services lists

9.1 Rearrange services.............................. 15

9.2 View new TV channels or Listen

to new Radio stations........................ 15

10 Service setup............................. 16

10.1 Add new services................................ 16

10.2 Reinstall all services............................ 16

10.3 Manual install services........................ 17

11 Test reception........................... 18

12 Preferences................................ 19

13 Access restrictions.....................20

14 Setting up your favourite list....21

15 Information................................ 22

16 Using the Options menu...........23

17 TV Guide (Electronic ...............24

18 Recording function.................... 25

19 Digital teletext (MHEG)...........27

20 Using the Conditional Access

Module (CAM ............................28

21 Automatic tuning of analogue

programmes.............................. 29

22 Manual tuning of analogue

programmes.............................. 30

23 Programme sort........................31

24 Naming of channel.....................32

25 Selecting your favourite

programme ............................... 33

English

2

26 Features

26.1 Timer...................................................... 34

26.2 Parental control................................... 35

26.3 Child lock.............................................. 36

26.4 Active control...................................... 36

27 Picture and Sound setings........ 37

28 Smart Picture and Sound......... 38

29 Screen formats.......................... 39

30 Teletext......................................40

31 Using the TV as PC monitor

31.1 Connecting the PC.............................. 42

31.2 Control TV settings while a PC is

connected ............................................ 42

32 Using the TV in HD (High

Deﬁnition) mode

32.1 Connecting the HD equipment........ 43

32.2 Control TV settings while in HD

mode...................................................... 43

33 Connecting other equipment

33.1 Overview of connections...................45

33.2 Connect VCR and DVD recorder...46

33.3 Connect Decoder and VCR..............46

33.4 Connect 2 VCRs or VCR and DVD....

recorder.................................................47

33.5 Connect a satellite receiver.............. 47

33.6 Connect a DVD player, Cable box or

Game console...................................... 48

33.7 Connect a DVD player, a Satellite

receiver or Cable box ....................... 48

33.8 Connect a PC....................................... 49

33.9 Connect a Camera, Camcorder or

Game console...................................... 50

33.9.1 Connect a Headphone....................... 50

34 Troubleshooting........................51

35 Glossary..................................... 53

3

1 Introduction

Thank you for purchasing this television set.

This manual contains all information you

will need to initially install and operate your

new TV.

If this instruction manual does not

give an answer to your problem or

if Troubleshooting page does not solve

your TV problem, you can call your Local

Philips Customer or Service Centre. See the

supplied Worldwide guarantee booklet for

details. Please have the Model and Product

number (which you can find at the back or

the bottom of your television set or on the

packaging) ready, before calling the Philips

customer support service.

1.1 Important information

1.1.1 Stationary images on the TV

screen

A characteristic of LCD and Plasma Panels

is that displaying the same image for a long

time can cause a permanent after-image to

remain on the screen. This is called

phosphor burn in. Normal use of the TV

should involve the showing of pictures

that contain constantly moving and changing

images that fill the screen.

Examples of stationary images (this is not

an all inclusive list, you may encounter

others in your viewing).

• TV and DVD menus: listings of DVD

disk content.

• Black bars: when black bars appear at

the left and right side of the screen, it is

recommended to change to a picture

format so that the picture fills the entire

screen;

• TV channel logo: present a problem if

they are bright and stationary. Moving

or low-contrast graphics are less likely

to cause uneven aging of the screen;

• Stock market stickers: presented at the

bottom of the TV screen;

• Shopping channel logos and pricing

displays: bright and shown constantly or

repeatedly in the same location on the

TV screen.

• Examples of still pictures also include

logos, computer images, time display,

teletext and images displayed in 4:3

mode, static images or characters, etc.

Tip:

Reduce contrast and brightness when

viewing.

1.1.2 Electric, Magnetic and

Electromagnetic Fields (“EMF”)

• Philips Royal manufactures and sells many

products targeted at consumers, which,

like any electronic apparatus, in general

have the ability to emit and receive

electro magnetic signals.

• One of Philips’ leading Business

Principles is to take all necessary health

and safety measures for our products, to

comply with all applicable legal

requirements and to stay well within the

EMF standards applicable at the time of

producing the products.

• Philips is committed to develop, produce

and market products that cause no

adverse health effects.

• Philips confirms that if its products are

handled properly for their intended use,

they are safe to use according to scientific

evidence available today.

• Philips plays an active role in the

development of international EMF and

safety standards, enabling Philips to

anticipate further developments in

standardisation for early integration in its

products.

4

1.2 What is digital TV?

Digital Television offers a far wider choice

of TV viewing, free from the interference

that you may experience on analogue

TV. It promises to transform television

viewing into a whole new experience.

There is a greater selection of widescreen

programming. Many of your favourite

programmes are in widescreen on the

digital channels - something the analogue TV

cannot do properly.

There is new whole experience of

interactivity on digital TV. By using your

remote control, you can access all kinds

of information like the digital text which

is much clearer than the old teletext

system. It gives you the added enjoyment

of related information running alongside

the programme you are watching. You

can also access an Electronic Programme

Guide that provides you with a quick and

easy way to view a complete list of digital

programmes as you would in a newspaper

or TV magazine.

1.3 Digital or Analogue channels?

When the television is powered on for the

first time, it will always be in Digital mode.

Use the key of the remote control to

switch the TV between analogue and digital

mode. Use the P + / – or to

keys to select channels.

Note

• Chapters 6 to 20 contain all the

information you need to operate your

TV in the Digital mode. Chapters 21

to 30 contain all the information and

instructions you need to operate your

TV in the Analogue mode.

5

2 Safety

Warning: The connections do not

have to be made before hanging but the

cables must be inserted into connectors

of the TV.

2.1 General

1

Place or hang the TV wherever you

want but make sure that air can

circulate freely through the ventilation

slots.

2

Do not install the TV in a confined

space such as a book case or a similar

unit.

3

To prevent any unsafe situations, no

naked flame sources such as lighted

candles should be placed in the vicinity

of the TV set.

4

Avoid heat, direct sunlight and exposure

to rain or water.

5

As a safety precaution, do not touch any

part of the TV, power lead or aerial

lead during lightning storms.

6

Pull the power lead by the plug. Do not

pull on the power lead. Do not use a

poor fitting mains socket. Insert the plug

fully into the mains. If it is loose, it may

cause arching and result in fire.

7

Take care not to connect too many

equipment to the same mains socket

as it may cause overloading resulting

in fire or electric shock.

8

Avoid placing a vase or vases filled

with water on top or near the TV.

Water spilled into the set could result

in electric shock. Do not operate set if

water is spilled into the set. Unplug the

power cord from the mains

immediately

and have the set checked by a qualified

serviceman.

9

Installation of the TV set on thewall

should be carried out by a qualified

serviceman. Improper and incorrect

installation may render the set unsafe.

2.2 Care of the screen

1

Do not remove the protective sheet

until you have completed the stand/

wallmounting and connections. Please

handle with care.

Note

Use only the soft cloth provided

to clean the glossy front of the

TV.

2

Do not use too wet a cloth which is

dripping with water. Do not use

acetone, toluene or alcohol to clean

the TV. As a safety precaution, unplug

the power cord from the mains when

cleaning the set.

3

Do not touch, push or rub or strike the

screen with anything hard as this may

scratch, mar or damage the screen

permanently.

X

6

3 Overview of television

keys and connectors

1 3 42

POWER

PROGRAM

MENU

VOLUME

1

2

3

4

2

1

EXT 3

These connectors are located on the rear of the

TV and are backward facing..

1

CI (Common Interface) slot: to

connect a CAM (Conditional Access

Module) and a smartcard.

2

TV Aerial socket :

Insert the aerial

plug into the 75 Ω : socket.

3

HDMI 1 / HDMI 2: to connect to

set-top box, DVD player/recorder, High

Definition equipment or Personal

Computer.

4

EXT4

: to connect to equipment like

DVD, Decoder which have the same

sockets.

5

EXT 1 (RGB) and

6

EXT 2 (CVBS/

S-VIDEO): connect to equipment

like DVD

player/recorder, VCR, Decoder which

have similair connections (so called ‘scart

connetcions’).

3.3 Side connectors

These connectors are located on the side of the

TV.

1

Headphone : for your personal

listening pleasure, connect the phono

jack to the headphone connector of the

TV.

2

Audio Video

: for connecting to devices

like camera or camcorder.

3.1 Side controls

The Side controls are located on the left hand side

of the TV.

1

POWER

.

: to switch the TV on and

off. Note: For zero power

consumption, you need to remove the

mains cord from the mains socket.

2

VOLUME – / +: to change sound to

be louder or quieter.

3

MENU: to display or close menus.

The PROGRAM – / + keys can be used

to select a menu item and the VOLUME

– / + keys to enter into the selected

menu item and make adjustments.

4

PROGRAM – / +: to select

programmes.

3.2 Rear connectors

These connectors are located on the rear of the

TV and are downward facing.

5

EXT 2

(CVBS /S-VIDEO)

4

EXT 1

(RGB)

7

4 Getting started

4.4 Switching on the TV

• To switch on the TV, press the

POWER key on the side of the set. A

blue indicator comes on and after a few

seconds, the screen lights up at the left

hand bottom of the front of the set.

• If the TV set remains in standby mode

(red

indicator), press the PROGRAM – /

+

key on the side controls or the P – / +

key on the remote control.

4.5 Using the Remote Control

Insert the 2 batteries supplied. Be sure the

(+) and (-) ends of the batteries line up

correctly (inside of case is marked.)

4.1 Before you start

Warning

The connections do not have to be

made before hanging but the cables

must be inserted into connectors of

the TV.

4.2 Connect the antenna

Insert the aerial plug ﬁrmly into the 75 Ω :

aerial socket at the bottom of the TV and in

the wall antenna socket.

4.3 Connect the mains

Insert the mains cord (supplied) into the

mains socket at the backside (downward

facing) of the TV and in the wall socket.

Warning

Verify that the mains supply voltage in your

home corresponds to the voltage printed on

the sticker at the rear of the TV.

To wall

socket

Plasma

TV

LCD

TV

To wall

socket

POWER

PROGRA

M

MENU

VOLUME

Connectors at rear of TV

(facing downward)

Side controls

of TV

AC in

8

5 Remote control

functions

2

Sound mode

Used to force programmes in Stereo

and Nicam Stereo to Mono. For

bilingual programmes, select Dual å or

Dual » (as indicated on the screen

during such broadcasts).

The Mono

indication

shows up in red when in forced

position.

In digital mode, å-» displays the list

of audio languages.

3

Subtitles mode

In digital mode, this key activates or

deactivates the subtitle mode.

4

MENU

To call up or exit the TV analogue menus.

5

Cursors Up/Down/Left/Right

( )

These 4 keys are used for selection and

adjustment of menu items.

6

Analogue or Digital mode

To switch between the television analogue

and digital mode.

7

Screen Format

(See page 39).

8

AV

To display Source List to select TV

(Analogue), Digital TV or connected

peripheral equipment (EXT 1, EXT 2,

EXT 3, EXT 4, HD

MI 1 or HDMI 2). Use

the Î ï keys to select source and the

Æ /

key to confirm selection.

9

Options

(See page 23)

10

Cancel

In digital mode, this key functions as an

exit key for MHEG teletext if no colour

keys links are available to exit

teletext mode.

1

Standby

To set the TV to standby mode. To

switch the TV on again, press the

key once more or press the

to , P + / – or key.

Note: when the TV is switched on,

the

last viewed mode is displayed.

10

5

2

1

3

4

7

8

6

9

15

Mute

Turn off or on sound.

16

/ Numerical keys /

For direct access to programmes.

For a two digit programme number, the

2

nd

digit must be entered shortly after

the first digital before the dash

disappears.

17

Screen information

In digital mode, display/exit the

information banner (see page 14).

In analogue mode, display/remove the

programme number, the sound mode,

the clock and the remaining time of

the sleep timer.

18

Active Control

Automatically adjusts the picture setting

for optimal picture quality continuously

under any signal conditions. (See page

36).

19

Digital TV / Radio

In digital mode, this key is used to access

digital radio stations. Press the key

to access radio list. Note : To return

to digital video mode, press the

key again.

20

TV Guide

(see page 24)

21

Programme ( + P – )

Selects next or previous available

channel/source (or page in digital menu).

22

Alternate channel / Edit or back

space

In Analogue/Digital mode, it allows you

to alternate the previously viewed

programme and the current programme.

It is also used as an edit or back space

key when you are naming your favourite

channel.

23

Smart Picture /Sound

Accesses a series of predefined picture

and sound settings (see page 38).

11

Teletext

(See page 40-41).

12

Digital menu

To display / exit from the digital menu

(when TV is in digital mode).

13

OK

Confirms selection. Also access

program list in Digital mode.

14

Volume ( + VOL – )

To turn on sound louder or quieter.

16

14

18

17

11

22

23

21

20

15

13

12

19

Page is loading ...

Philips 20HF5335D,26HF5335D, 32HF5335D User manual

This manual is also suitable for

Philips 20HF5335D,26HF5335D, 32HF5335D User manual

Related papers

Other documents