Audiovox VC-600 User manual

Brand: Audiovox

Model: VC-600

Category: Security cameras

Type: User manual

1. Description1. Description

1. Description

The VC-600 Camera is a wireless black-and-white

camera that is designed to be used in conjunction

with a VC-600 Wireless Receiver and VE-500

5-inch LCD Drop-Down Stereo TV or similar TV

with A/V inputs for baby monitoring, surveillance

around the home, etc.

2. Features2. Features

2. Features

s IR LED’s for night operation.

s A choice of 4 channels for optimum reception.

s Sensitive, built-in microphone for enhanced

monitoring capability.

s 12V AC/DC adapter included.

s Camera automatically adjusts to allow

viewing brightly lit as well as dimly lit areas .

3. Included In This Kit3. Included In This Kit

3. Included In This Kit

s VC-600 camera

s Antenna

s User’s manual

s Two mounting brackets:

- wall mount with 3 screws

- table top mount

s 12V AC/DC adapter (500 mA.)

4. Tools Required4. Tools Required

4. Tools Required

s #1 Phillips-head screwdriver

5. Installation Precautions5. Installation Precautions

5. Installation Precautions

s Avoid exposure to direct sunlight.

s Be careful not to spill any wate r on the unit.

s Do not shake or vibrate the unit.

s Use a soft cloth moistened with warm

128-5680128-5680

128-5680

1 of 41 of 4

1 of 4

Released 12-14-99.

Wireless B/W CameraWireless B/W Camera

Wireless B/W Camera

C-600C-600

C-600

User’User’

User’

s Mans Man

s Man

ualual

ual

ANTENNAANTENNA

ANTENNA

IR LEDIR LED

IR LED

1/3" CCD1/3" CCD

1/3" CCD

CCD CAMERA BASECCD CAMERA BASE

CCD CAMERA BASE

w/WIRELESS AV MODULE w/WIRELESS AV MODULE

w/WIRELESS AV MODULE

CHANNELCHANNEL

CHANNEL

SELECTIONSELECTION

SELECTION

POWERPOWER

POWER

JACKJACK

JACK

ANTENNAANTENNA

ANTENNA

CONNECTORCONNECTOR

CONNECTOR

MICROPHONEMICROPHONE

MICROPHONE

ANTANT

ANT

1 2 3 41 2 3 4

1 2 3 4

DC 12VDC 12V

DC 12V

water to wipe off any dust, if necessary.

s Do not touch the CCD sensor. If necessary, use

a soft, lint-free cloth moistened with alcohol

to clean the CCD sensor.

s If the camera does not operate properly,

unplug the unit and contact your local

dealer.

6. Installation6. Installation

6. Installation

s Select base to be used.

s Screw the camera to the base. If using the

wall mount, screw the base to the wall before

attaching camera.

CHANNELCHANNEL

CHANNEL

CH1CH1

CH1

CH2CH2

CH2

CH3CH3

CH3

CH4CH4

CH4

FREQUENCY 2413 MHz 2432 MHz 2451MHz 2470 MHz

OUTPUT POWER 10 mW

OUTPUT IMPEDANCE 50 ohms typical

POWER 12 VDC supplied by AC/DC adapter

CURRENT 260 mA

VIDEO OUTPUT 1Vp-p composite video (75 ohms)

AUDIO OUTPUT 2Vp-p max

DIMENSIONS

L:L:

L: 77mm

H:H:

H: 56mm

D:D:

D: 56mm

OPERATING TEMPERATURE -10° C to +50° C

WEIGHT 115 grams

s Carefully screw the antenna to the camera.

s Plug the AC/DC adapter into the camera Power

Jack and then into the wall.

s Set channel select switch to the corresponding

channel of the receiver.

s Adjust the camera for best viewing angle.

7. Channel Selection7. Channel Selection

7. Channel Selection

After connecting and turning on the equipment,

select the channel that gives the best reception and

least interference. The channel number must match

the channel number of the receiver. The antenna

is normally positioned vertically but its angle m a y

be changed to obtain the best reception.

128-5680128-5680

128-5680

2 of 42 of 4

2 of 4

8.8.

128-5680128-5680

128-5680

3 of 43 of 4

3 of 4

1. Description1. Description

1. Description

The VC-600 Receiver is a wireless receiver that is

designed to be used in conjunction with a VC-600

Camera and VE-500 5-inch LCD Drop-Down

Stereo TV or similar TV with A/V inputs for baby

monitoring, surveillance around the home, etc.

2. Features2. Features

2. Features

· A choice of 4 channels for optimum reception.

· 12V AC/DC adapter included.

3. Included In This Kit3. Included In This Kit

3. Included In This Kit

· VC-600 Receiver

· Antenna

· User’s manual

· 3.5x20 screws (4)

· Plastic conical anchors (4)

· 12V AC/DC adapter (500 mA.)

· A/V cable

· White power cable for powering the unit from

a VE-500 5-inch LCD Drop-Down Stereo TV

4. Tools Required4. Tools Required

4. Tools Required

· #1 Phillips-head screwdriver

5. Installation Precautions5. Installation Precautions

5. Installation Precautions

· Be careful not to spill any water on the receiver.

· Use a soft cloth moistened with warm water

to wipe off any dust, if necessary.

· Do not shake or vibrate the unit.

· If the receiver does not operate properly,

unplug the unit and contact your local dealer.

6. Installation6. Installation

6. Installation

· The receiver may be placed on a flat surface

or it may be permanently mounted by using

the four supplied screws and plastic conical

anchors.

· Carefully screw the antenna to the receiver.

Video+AudioWireless ReceiverVideo+AudioWireless Receiver

Video+AudioWireless Receiver

DC 12VDC 12V

DC 12V

CHANNELCHANNEL

CHANNEL

SELECTIONSELECTION

SELECTION

VIDEOVIDEO

VIDEO

OUTOUT

OUT

AUDIOAUDIO

AUDIO

OUTOUT

OUT

ANTENNA CONNECTORANTENNA CONNECTOR

ANTENNA CONNECTOR

128-5680128-5680

128-5680

4 of 44 of 4

4 of 4

· Find a suitable location for the receiver.

· Plug the RCA cable into the A/V outputs

(yellow to video out and white to audio out).

· Plug the other end of the RCA cable into the

A/V inputs of the TV monitor to be used.

· If using this receiver with any Audiovox

VE-XXX series product, plug the white dc

power cable into the receiver and plug the other

end with the center pin plug into the VE-XXX.

· Use AC-DC adapter if not connecting to

CHANNELCHANNEL

CHANNEL

CH1CH1

CH1

CH2CH2

CH2

CH3CH3

CH3

CH4CH4

CH4

FREQUENCY 2413 MHz 2432 MHz 2451MHz 2470 MHz

IMPEDANCE 50 ohms typical

POWER 12 VDC supplied by AC/DC adapter

CURRENT 280 mA

VIDEO OUTPUT 1Vp-p composite video (75 ohms)

AUDIO OUTPUT 2Vp-p max

DIMENSIONS

L: L:

L: 115mm

H:H:

H: 23mm

D:D:

D: 80mm

OPERATING TEMPERATURE -10° C to +50° C

VE-XXX in which case the white DC

Power cable is not used.

7. Channel Selection7. Channel Selection

7. Channel Selection

After connecting and turning on the equipment,

select the channel that gives the best reception

and least interference. The channel number

must match the channel number of the camera.

The antenna is normally positioned vertically

but its position may be changed to obtain the

best reception.

NOTICE: Due to the nature of RF (Radio Frequency) signals, interference

mama

y occur fry occur fr

y occur fr

omom

other deother de

other de

vices that gvices that g

vices that g

enerate radio frequencies (sucenerate radio frequencies (suc

enerate radio frequencies (suc

h as micrh as micr

h as micr

wawa

ve ove o

ve o

vens,vens,

vens,

cor cor

cor

dless phones anddless phones and

dless phones and

porpor

por

tabtab

tab

le radio transceiverle radio transceiver

le radio transceiver

s) when thes) when the

s) when the

y are operated in the vicinity of this camera and receivery are operated in the vicinity of this camera and receiver

y are operated in the vicinity of this camera and receiver

MoMo

ving the camera and/or receiver farving the camera and/or receiver far

ving the camera and/or receiver far

ther ather a

ther a

wawa

y fry fr

y fr

om these types of deom these types of de

om these types of de

vices mavices ma

vices ma

y y

eliminateeliminate

eliminate

interfinterf

interf

erenceerence

erence

Occasional interf Occasional interf

Occasional interf

erence is normal and does not indicate a deference is normal and does not indicate a def

erence is normal and does not indicate a def

ective prective pr

ective pr

oduct.oduct.

oduct.

8.8.

Audiovox VC-600 User manual

Brand: Audiovox

Model: VC-600

Category: Security cameras

Type: User manual

Download PDF

report

Audiovox VC-600 User manual

Audiovox VC-600 User manual

Other documents