Doro 912c Syntiro Owner's manual

912c Syntiro

2

3

4

5

6

7

8

9

10

11

12

13

14

15

1

Flash button time (100/300)

Amplication lock

Hanger Hook for wall mounting

Handset volume

Volume boost

Handset tone

Mute

Ringer indicator

1.

2.

3.

4.

5.

6.

7.

8.

Ringtone

Ring volume

Memory button

Store button

One-Touch (Direct) Memories

Redial

Recall (R key)

9.

10.

11.

12.

13.

14.

15.

English

Page is loading ...

1

English

Connection

Connect the curly cord to the handset

and to the socket marked

y

on the

telephone.

Connect the telephone line cord to a

network wall socket and to the

K

socket

on the back of the telephone.

Lift the handset and listen for the dial tone.

IMPORTANT: Use the telephone line cord

supplied, an existing line cord from a

previous phone may not be compatible.

Wall mounting

The telephone can be wall mounted using an

optional wall mount bracket. The wall mount

bracket is available as an accessory.

Fix the wall mount bracket on the back of

the telephone.

Secure two screws, vertically positioned

83mm apart.

Activate the hanging peg (located by the

hook switch) by rotating it 180 degrees.

Making a call

Normal dialling

Lift the handset.

Dial the number. Hang up the handset to

terminate the call.

Redial

Press

r

to call the last dialed phone number.

Memory

The telephone will store 3 one-touch (M1-M3)

and 10 two-touch memories.

Storing One-Touch Memories

Lift the handset, press .

Enter the telephone number to be stored

(up to 16 digits). Press .

Select a memory location by pressing the

corresponding button,

0

-

9

or M1-M3.

1.

2.

3.

1.

2.

3.

1.

2.

1.

2.

3.

Dialling using One-Touch Memories

Lift the handset and wait for a dial tone.

Select the required memory location

(M1-M3) by pressing the corresponding

button.

Dialling using Two-touch Memories

Lift the handset, press .

Press desired location

0

-

9

.

Mute button

Press and hold

z

to disable the handset

microphone, release

z

to reconnect the

microphone.

Volume control

The handset volume control is located under

the handset.

Ringer settings

The ringer volume and melody can be

selected using the switches located on the

back side of the telephone:

Ringer volume

Ringer type

Volume Boost

The handset volume can be raised another

15 dB by pressing the Volume Boost key

while talking.

The LED indicator on the key will light up.

Press the key again or terminate the call to

turn off Volume Boost.

Warning!

The handset volume can be very loud with

this setting. Volume boost should only be

used by persons with impaired hearing.

1.

2.

1.

2.

2

English

Locking the Volume Boost ( )

The Volume Boost is set to switch off after

every call, this can be changed so the very

high amplication stays permanent switched

on using the setting.

This setting should only be activated if all

users have impaired hearing and require

powerful amplication.

The standard setting is .

Handset tone

Change frequency range/tone level and quality

(on the left side).

PLEASE NOTE!

Only works when the Volume Boost is active.

Ringer indicator

The Ringer indicator lights up on an incoming

call.

Hearing aid

This telephone is hearing aid compatible.

Select the T mode on your hearing aid to

enable this feature.

Flash button time (100/300)

100 is the standard setting for most countries.

300 for France/Portugal.

Recall key (R)

Press the

R

key followed by the extension

number to transfer a call when connected to a

PBX system.

Additional network services may be accessible

by using the

R

,

*

and

#

keys. Please contact

your network operator for more information

about the available network services.

Warranty and technical data

This product is guaranteed for a period of 24

months from the date of purchase. In the unlikely

event of a fault occurring during this period, please

contact the place of purchase. Proof of purchase is

required for any service or support needed during

the guarantee period.

This guarantee will not apply to a fault caused

by an accident or a similar incident or damage,

liquid ingress, negligence, abnormal usage,

non-maintenance or any other circumstances on

the user’s part. Furthermore, this guarantee will

not apply to any fault caused by a thunderstorm

or any other voltage uctuations. As a matter of

precaution, we recommend disconnecting the

device during a thunderstorm.

NOTE! This guarantee does not affect your legal

(statutory) rights under your applicable national

laws relating to the sale of consumer products.

Specications

Size: 170 mm x 190 mm x 60 mm

Weight: 750 g

Declaration of Conformity

Doro hereby declares that Doro 912c Syntiro

conforms to the essential requirements and other

relevant regulations contained in the Directives

1999/5/EC (R&TTE) and 2002/95/EC (RoHS).

A copy of the Declaration of Conformity is available

at www.doro.com/dofc

UK

Technical support is available by email on

[email protected]

Premium rate telephone number:

0905 895 0854, calls cost 50 pence per minute

(price correct at the time of publication).

Open Monday to Friday, 9.00AM until 5.00PM.

You can also contact us in writing (regarding any

Spares or Technical query):

Customer Services

Doro UK Ltd

1 High Street

Chalfont St Peter

Buckinghamshire

SL9 9QE

Further contact details are available on our website:

www.doro-uk.com.

Page is loading ...

English

Swedish

Norwegian

Danish

Finnish

French

German

Spanish

Italian

Dutch

Greek

Version 1.0

Doro 912c Syntiro Owner's manual

Related papers

Other documents