Intellinet 503280 Installation guide

Category
Networking cards
Type
Installation guide

This manual is also suitable for

PowerLine
HD etHernet
ADAPter
quick instALL
guiDe
Model 503273
INT-503273-QIG-ML1-0407-04-0
ENGLISH
DEUTSCH
ESPAÑOL
FRANÇAIS
POLSKI
ITALIANO
2
ENGLISH
Thank you for purchasing the INTELLINET NETWORK SOLUTIONS
PowerLine HD Ethernet
Adapter, Model 503273.
This guide presents the basic steps to set up and operate this device. For detailed
instructions and specications, refer to the user manual on the CD enclosed with this
product or at www.intellinet-network.com.
hardware installation
To connect the existing AC wiring in your home or oce to the Ethernet network, this
device can be attached to a LAN switch; however, each PC or server plugged into an
AC outlet needs to be directly attached to its own PowerLine adapter.
1. Using the included Ethernet cable, connect the adapter to the computer.
2. Plug the adapter into an AC outlet. IMPORTANT: Because the adapter sends data
over home or oce AC power lines, plug it directly into an lectrical outlet — not a
universal power supply or power strip with surge protection. The adapter has its
own power lter for protection against surges.
Using a Router
To connect the adapter to a router, disconnect the network cable from the PC and
connect it to the uplink port of the router. If only a LAN port is available on the router,
use a crossover cable to connect the adapter to the router.
configuration utility
After installing the adapter, run the Setup Wizard to install the PowerPacket Con-
guration Utility. Use this utility to check the PC’s direct connection to the AC power
network, to search for PowerLine devices on your network, and to set up security
using a network password. NOTE: If you want the devices on your PowerLine network
to share high-speed Internet access, connect the adapter to a router after you run the
PowerPacket Conguration Utility (see above).
PowerLine HD Ethernet Adapter • Quick Install Guide English
LED STATUS DESCRIPTION
Power On Power on
O Power o
Link/Act On AC power line port detects another PowerLine device
Blinking Looking for more PowerLine devices
O AC power line port is not detecting another PowerLine device
Ethernet On Ethernet port link
Blinking Ethernet activity
O No Ethernet port link
Utility Installation
1. Insert the included utility CD, then run the setup.exe
program to begin the installation. (You can also run the
setup program using the CD’s autorun program.)
2. When the Welcome to the PowerPacket Utility Setup Wizard screen displays, click
“Next.
3. When the Select Installation Folder screen displays, click “Browse to select a folder
other than the one in the “Folder” eld, and click “Next.
ENGLISH
3
setup.exe
Power Packet
Utility Setup.msi
4
ENGLISH
4. When the Conrm Installation screen displays, click “Next”; when the Installation
Complete screen displays, click “Close.
Accessing the PowerPacket Conguration Utility
To open the conguration utility, double-click the PowerPacket
Utility icon on your desktop or click to open the “PowerPacket
Utility listing in your Start menu. The Main screen will display
initially, with tabs for three other menu/screen options —
Privacy, Diagnostics and About — also described below.
Main
Local Device(s) on your computer: Devices connected locally to the host computer are
listed here. In most cases, only one device will be presented.
Connect: To choose a device if there’s more than one connected, highlight it and click
“Connect.
Upgrade Firmware: Click to update one of the two les (PIB and NVM) that may require
updating (and display the screen below). NOTE: Proceed only if you know that a new
ENGLISH
5
version of either le is available on the INTELLINET Web site or if you’re instructed to
do so by INTELLINET Tech Support.
Device Detected / Network Type / Autoscan: The number or status of these three references
is listed just above the lower-panel window: a count of all HomePlug AV remote
devices discovered to be currently on the logical network; public or private network;
and whether Autoscan is on or o.
Device Name: Devices are listed in this column by their default name (as shown) unless
re-dened by clicking “Rename” or by highlighting the name and editing it in place.
An icon is usually displayed alongside the name, with a color distinction between
HomePlug 1.0 and Turbo devices.
Password: By default, this column is blank;
however, clicking “Enter Password” with
a device selected on the Main screen
allows you to set the password, which
is required when creating a private
network. When the Set Device Password
screen displays, the name of the selected
device appears above the “Password”
text eld. Enter the password, which
appears on the back panel of the
adapter, then click “OK. NOTE: The
password is accepted regardless of the
font case entered, but do include any
dashes that separate the four- character
alphanumeric segments.
A conrmation box
appears if the password
was correctly entered. If
a device isn’t found on
the network, a
notication prompt will appear, along with suggested solutions.
Quality: This indicates the quality of the transmission between two devices.
Rate: This indicates the current transmission rate of the selected device.
MAC Address: This is the device’s MAC address.
PL65000
001
00120E000
000
MNMD-VVRD-CSNO-
OZFX
Add: Click to add a remote device to the
existing network. When the Add Device
to Network screen displays, ll in the
“Device Name” and “Password” text
elds, then click “OK. A conrmation
box appears if the entries are correct. If
a device isn’t found on the network, a
notication prompt will appear, along
with suggested solutions.
Scan: Click to search for devices that are
connected to the network. By default,
the utility automatically scans every few
seconds and updates the Local Devices
list.
Privacy
This screen allows you to maintain security for the logical network and select the
devices to be included in the network.
Private Network Name: All PowerLine HD devices are set with a default logical network
(network name): This is normally “HomePlugAV, and will display in the text eld when
you click “Use Default (Public Network). Alternatively, you can change to a private
network by changing the network name (network password) of devices. You can
always reset to the PowerLine HD network (Public) by entering “HomePlugAV” as the
network name.
6
ENGLISH
ENGLISH
7
Set Local Device Only: Click to change the network name (network password) of the local
device. If a new network password is entered, all the devices previously listed on the
Main screen will no longer be present in the new network, eectively preventing the
local devices from communicating with the devices in the old logical network.
Devices previously set up with the same logical network (same network name) will
appear in the device list after selecting this option.
Set All Devices: Click to change the logical network of all devices that appear on the
Main screen and whose passwords had been entered for the same logical network. A
dialog window will appear to report the success of this operation. For devices whose
passwords were not entered, this operation will fail and a failure message will display.
Diagnostics
This screen displays detailed information about both local and remote devices.
System Information: This window presents device names, user names, rmware versions,
packets sent/dropped/missed/failed, and other data that can be useful in monitoring
and identifying a device.
Remote Device History (Log): This window presents historical data of all remote devices.
Those currently active on the logical network show a transfer rate in the “Rate” column;
those that are inactive or no longer exist on the network show a question mark (?)
and a “Last Seen” time/date.
Delete / Save Report / Print Report: Diagnostics data can be removed, printed or saved
to a text le for later reference by clicking the appropriate button.
About
This screen simply displays the software version and company information. The Autoscan
feature can also be selected/activated on this screen.
38
WASTE ELECTRICAL & ELECTRONIC EQUIPMENT
Disposal of Electric and Electronic Equipment
(applicable in the European Union and other European countries with separate collection systems)
ENGLISH
This symbol on the product or its packaging indicates that this product shall not be treated as household waste.
Instead, it should be taken to an applicable collection point for the recycling of electrical and
electronic equipment. By ensuring this product is disposed of correctly, you will help prevent
potential negative consequences to the environment and human health, which could otherwise
be caused by inappropriate waste handling of this product. If your equipment contains easily
removable batteries or accumulators, dispose of these separately according to your local
requirements. The recycling of materials will help to conserve natural resources. For more
detailed information about recycling of this product, contact your local city oce, your household waste
disposal service or the shop where you purchased this product. In countries outside of the EU: If you wish
to discard this product, contact your local authorities and ask for the correct manner of disposal.
DEUTSCH
Dieses auf dem Produkt oder der Verpackung angebrachte Symbol zeigt an, dass dieses Produkt nicht mit
dem Hausmüll entsorgt werden darf. In Übereinstimmung mit der Richtlinie 2002/96/EG des Europäischen
Parlaments und des Rates über Elektro- und Elektronik-Altgeräte (WEEE) darf dieses Elektrogerät nicht
im normalen Hausmüll oder dem Gelben Sack entsorgt werden. Wenn Sie dieses Produkt entsorgen
möchten, bringen Sie es bitte zur Verkaufsstelle zurück oder zum Recycling-Sammelpunkt Ihrer Gemeinde.
ESPOL
Este símbolo en el producto o su embalaje indica que el producto no debe tratarse como residuo doméstico.
De conformidad con la Directiva 2002/96/CE de la UE sobre residuos de aparatos eléctricos y electrónicos
(RAEE), este producto eléctrico no puede desecha se con el resto de residuos no clasicados. Deshágase
de este producto devolviéndolo al punta de venta o a un punta de recogida municipal para su reciclaje.
FRANÇAIS
Ce symbole sur Ie produit ou son emballage signie que ce produit ne doit pas être traité comme un
déchet ménager. Conformément à la Directive 2002/96/EC sur les déchets d’équipements électriques
et électroniques (DEEE), ce produit électrique ne doit en aucun cas être mis au rebut sous forme de
déchet municipal non trié. Veuillez vous débarrasser de ce produit en Ie renvoyant à son point
de vente ou au point de ramassage local dans votre municipalité, à des ns de recyclage.
ITALIANO
Questo simbolo sui prodotto o sulla relativa confezione indica che il prodotto non va trattato come un riuto
domestico. In ottemperanza alla Direttiva UE 2002/96/EC sui riuti di apparecchiature elettriche ed
elettroniche (RAEE), questa prodotto elettrico non deve essere smaltito come riuto municipale misto. Si
prega di smaltire il prodotto riportandolo al punto vendita o al punto di raccolta municipale locale per un
opportuno riciclaggio.
POLSKI
Jeśli na produkcie lub jego opakowaniu umieszczono ten symbol, wówczas w czasie utylizacji nie wolno
wyrzucać tego produktu wraz z odpadami komunalnymi. Zgodnie z Dyrektywą Nr 2002/96/WE w sprawie
zużytego sprzętu elektrycznego i elektronicznego (WEEE), niniejszego produktu elektrycznego nie wolno
usuwać jako nie posortowanego odpadu komunalnego. Prosimy o usuniecie niniejszego produktu
poprzez jego zwrot do punktu zakupu lub oddanie do miejscowego komunalnego punktu zbiórki
odpadów przeznaczonych do recyklingu.
40
FEDERAL COMMUNICATIONS COMMISSION
REGULATORY STATEMENT
FCC Class B
This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to Part 15 of Federal Communications Commission (FCC) Rules. These limits are designed
to provide reasonable protection against harmful interference in a residential installation. This
equipment generates, uses and can radiate radio frequency energy, and if not installed and used
in accordance with the instructions may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television reception, which can be determined
by turning the equipment o and on, the user is encouraged to try to correct the interference by one or
more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and the receiver.
• Connect the equipment to an outlet on a circuit dierent from the receiver.
• Consult the dealer or an experienced radio/TV technician for help.
R&TTE
ENGLISH
This device complies with the requirements of the R&TTE Directive 1999/5/EC.
DEUTSCH
Dieses Gerät enspricht der Direktive R&TTE Direktive 1999/5/EC.
ESPAÑOL
Este dispositivo cumple con los requerimientos de la Directiva R&TTE 1999/5/EC.
FRANÇAIS
Cet appareil satisfait aux exigences de la directive R&TTE 1999/5/CE.
POLSKI
Urządzenie spełnia wymagania dyrektywy R&TTE 1999/5/EC.
ITALIANO
Questo dispositivo è conforme alla Direttiva 1999/5/EC R&TTE.
Copyright © INTELLINET NETWORK SOLUTIONS
INTELLINET NETWORK SOLUTIONS
oers a complete line of active and passive networking products.
Ask your local computer dealer for more information or visit www.intellinet-network.com.
All products mentioned are trademarks or registered trademarks of their respective owners.
INTELLINET NETWORK SOLUTIONS
bietet ein vollständiges Sortiment aktiver und passiver
Netzwerkkomponenten. Für weitere Informationen wenden Sie sich bitte an Ihren Händler oder
nutzen Sie die Webseite www.intellinet-network.com.
Alle erwähnten Produkte sind registrierte Marken und Eigentum Ihrer jeweiligen Besitzer.
INTELLINET NETWORK SOLUTIONS
ofrece una línea completa de productos de red activa y pasiva.
Pregunte a su distribuidor para obtener mayor informacion o visite:
www.intellinet-network.com.
Todos los productos mencionados son marcas comerciales o marcas registradas de sus respectivos propietarios.
INTELLINET NETWORK SOLUTIONS
ore un assortiment complet de produits de réseau actifs et
passifs. Pour plus d’informations veuillez contacter votre revendeur ou utiliser la page d’accueil
www.intellinet-network.com.
Tous les produits mentionnés sont des marques commerciales ou des marques déposées de leurs
propriétaires respectifs.
INTELLINET NETWORK SOLUTIONS
to kompletna linia aktywnych oraz pasywnych komponentów
sieciowych. Popr lokalnego dealera o więcej informacji lub odwiedź stronę
www.intellinet-network.com.
Wszystkie nazwy handlowe i towarów są nazwami i znakami towarowymi
zastrzeżonymi odpowiednich rm odnośnych aścicieli.
INTELLINET NETWORK SOLUTIONS
ore una linea completa di prodotti di rete attivi e passivi.
Chiedi maggiori informazioni al tuo rivenditore di computer o visita il sito
www.intellinet-network.com.
Tutti i prodotti sopracitati sono marchi di fabbrica o marchi registrati depositati dai proprietari.
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38
  • Page 39 39
  • Page 40 40
  • Page 41 41
  • Page 42 42
  • Page 43 43
  • Page 44 44

Intellinet 503280 Installation guide

Category
Networking cards
Type
Installation guide
This manual is also suitable for

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI