IC Intracom 503273 Installation guide

PowerLine

HD etHernet

ADAPter

quick instALL

guiDe

Model 503273

INT-503273-QIG-ML1-0407-04-0

ENGLISH

DEUTSCH

ESPAÑOL

FRANÇAIS

POLSKI

ITALIANO

2

ENGLISH

Thank you for purchasing the INTELLINET NETWORK SOLUTIONS

™

PowerLine HD Ethernet

Adapter, Model 503273.

This guide presents the basic steps to set up and operate this device. For detailed

instructions and specications, refer to the user manual on the CD enclosed with this

product or at www.intellinet-network.com.

hardware installation

To connect the existing AC wiring in your home or oce to the Ethernet network, this

device can be attached to a LAN switch; however, each PC or server plugged into an

AC outlet needs to be directly attached to its own PowerLine adapter.

1. Using the included Ethernet cable, connect the adapter to the computer.

2. Plug the adapter into an AC outlet. IMPORTANT: Because the adapter sends data

over home or oce AC power lines, plug it directly into an lectrical outlet — not a

universal power supply or power strip with surge protection. The adapter has its

own power lter for protection against surges.

Using a Router

To connect the adapter to a router, disconnect the network cable from the PC and

connect it to the uplink port of the router. If only a LAN port is available on the router,

use a crossover cable to connect the adapter to the router.

configuration utility

After installing the adapter, run the Setup Wizard to install the PowerPacket Con-

guration Utility. Use this utility to check the PC’s direct connection to the AC power

network, to search for PowerLine devices on your network, and to set up security

using a network password. NOTE: If you want the devices on your PowerLine network

to share high-speed Internet access, connect the adapter to a router after you run the

PowerPacket Conguration Utility (see above).

PowerLine HD Ethernet Adapter • Quick Install Guide English

LED STATUS DESCRIPTION

Power On Power on

O Power o

Link/Act On AC power line port detects another PowerLine device

Blinking Looking for more PowerLine devices

O AC power line port is not detecting another PowerLine device

Ethernet On Ethernet port link

Blinking Ethernet activity

O No Ethernet port link

Utility Installation

1. Insert the included utility CD, then run the setup.exe

program to begin the installation. (You can also run the

setup program using the CD’s autorun program.)

2. When the Welcome to the PowerPacket Utility Setup Wizard screen displays, click

“Next.”

3. When the Select Installation Folder screen displays, click “Browse” to select a folder

other than the one in the “Folder” eld, and click “Next.”

ENGLISH

3

setup.exe

Power Packet

Utility Setup.msi

4

ENGLISH

4. When the Conrm Installation screen displays, click “Next”; when the Installation

Complete screen displays, click “Close.”

Accessing the PowerPacket Conguration Utility

To open the conguration utility, double-click the PowerPacket

Utility icon on your desktop or click to open the “PowerPacket

Utility” listing in your Start menu. The Main screen will display

initially, with tabs for three other menu/screen options —

Privacy, Diagnostics and About — also described below.

Main

Local Device(s) on your computer: Devices connected locally to the host computer are

listed here. In most cases, only one device will be presented.

Connect: To choose a device if there’s more than one connected, highlight it and click

“Connect.“

Upgrade Firmware: Click to update one of the two les (PIB and NVM) that may require

updating (and display the screen below). NOTE: Proceed only if you know that a new

ENGLISH

5

version of either le is available on the INTELLINET Web site or if you’re instructed to

do so by INTELLINET Tech Support.

Device Detected / Network Type / Autoscan: The number or status of these three references

is listed just above the lower-panel window: a count of all HomePlug AV remote

devices discovered to be currently on the logical network; public or private network;

and whether Autoscan is on or o.

Device Name: Devices are listed in this column by their default name (as shown) unless

re-dened by clicking “Rename” or by highlighting the name and editing it in place.

An icon is usually displayed alongside the name, with a color distinction between

HomePlug 1.0 and Turbo devices.

Password: By default, this column is blank;

however, clicking “Enter Password” with

a device selected on the Main screen

allows you to set the password, which

is required when creating a private

network. When the Set Device Password

screen displays, the name of the selected

device appears above the “Password”

text eld. Enter the password, which

appears on the back panel of the

adapter, then click “OK.” NOTE: The

password is accepted regardless of the

font case entered, but do include any

dashes that separate the four- character

alphanumeric segments.

A conrmation box

appears if the password

was correctly entered. If

a device isn’t found on

the network, a

notication prompt will appear, along with suggested solutions.

Quality: This indicates the quality of the transmission between two devices.

Rate: This indicates the current transmission rate of the selected device.

MAC Address: This is the device’s MAC address.

PL65000

001

00120E000

000

MNMD-VVRD-CSNO-

OZFX

Add: Click to add a remote device to the

existing network. When the Add Device

to Network screen displays, ll in the

“Device Name” and “Password” text

elds, then click “OK.” A conrmation

box appears if the entries are correct. If

a device isn’t found on the network, a

notication prompt will appear, along

with suggested solutions.

Scan: Click to search for devices that are

connected to the network. By default,

the utility automatically scans every few

seconds and updates the Local Devices

list.

Privacy

This screen allows you to maintain security for the logical network and select the

devices to be included in the network.

Private Network Name: All PowerLine HD devices are set with a default logical network

(network name): This is normally “HomePlugAV,” and will display in the text eld when

you click “Use Default (Public Network).” Alternatively, you can change to a private

network by changing the network name (network password) of devices. You can

always reset to the PowerLine HD network (Public) by entering “HomePlugAV” as the

network name.

6

ENGLISH

7

Set Local Device Only: Click to change the network name (network password) of the local

device. If a new network password is entered, all the devices previously listed on the

Main screen will no longer be present in the new network, eectively preventing the

local devices from communicating with the devices in the “old” logical network.

Devices previously set up with the same logical network (same network name) will

appear in the device list after selecting this option.

Set All Devices: Click to change the logical network of all devices that appear on the

Main screen and whose passwords had been entered for the same logical network. A

dialog window will appear to report the success of this operation. For devices whose

passwords were not entered, this operation will fail and a failure message will display.

Diagnostics

This screen displays detailed information about both local and remote devices.

System Information: This window presents device names, user names, rmware versions,

packets sent/dropped/missed/failed, and other data that can be useful in monitoring

and identifying a device.

Remote Device History (Log): This window presents historical data of all remote devices.

Those currently active on the logical network show a transfer rate in the “Rate” column;

those that are inactive or no longer exist on the network show a question mark (?)

and a “Last Seen” time/date.

Delete / Save Report / Print Report: Diagnostics data can be removed, printed or saved

to a text le for later reference by clicking the appropriate button.

About

This screen simply displays the software version and company information. The Autoscan

feature can also be selected/activated on this screen.

Page is loading ...

38

WASTE ELECTRICAL & ELECTRONIC EQUIPMENT

Disposal of Electric and Electronic Equipment

(applicable in the European Union and other European countries with separate collection systems)

ENGLISH

This symbol on the product or its packaging indicates that this product shall not be treated as household waste.

Instead, it should be taken to an applicable collection point for the recycling of electrical and

electronic equipment. By ensuring this product is disposed of correctly, you will help prevent

potential negative consequences to the environment and human health, which could otherwise

be caused by inappropriate waste handling of this product. If your equipment contains easily

removable batteries or accumulators, dispose of these separately according to your local

requirements. The recycling of materials will help to conserve natural resources. For more

detailed information about recycling of this product, contact your local city oce, your household waste

disposal service or the shop where you purchased this product. In countries outside of the EU: If you wish

to discard this product, contact your local authorities and ask for the correct manner of disposal.

DEUTSCH

Dieses auf dem Produkt oder der Verpackung angebrachte Symbol zeigt an, dass dieses Produkt nicht mit

dem Hausmüll entsorgt werden darf. In Übereinstimmung mit der Richtlinie 2002/96/EG des Europäischen

Parlaments und des Rates über Elektro- und Elektronik-Altgeräte (WEEE) darf dieses Elektrogerät nicht

im normalen Hausmüll oder dem Gelben Sack entsorgt werden. Wenn Sie dieses Produkt entsorgen

möchten, bringen Sie es bitte zur Verkaufsstelle zurück oder zum Recycling-Sammelpunkt Ihrer Gemeinde.

ESPAÑOL

Este símbolo en el producto o su embalaje indica que el producto no debe tratarse como residuo doméstico.

De conformidad con la Directiva 2002/96/CE de la UE sobre residuos de aparatos eléctricos y electrónicos

(RAEE), este producto eléctrico no puede desecha se con el resto de residuos no clasicados. Deshágase

de este producto devolviéndolo al punta de venta o a un punta de recogida municipal para su reciclaje.

FRANÇAIS

Ce symbole sur Ie produit ou son emballage signie que ce produit ne doit pas être traité comme un

déchet ménager. Conformément à la Directive 2002/96/EC sur les déchets d’équipements électriques

et électroniques (DEEE), ce produit électrique ne doit en aucun cas être mis au rebut sous forme de

déchet municipal non trié. Veuillez vous débarrasser de ce produit en Ie renvoyant à son point

de vente ou au point de ramassage local dans votre municipalité, à des ns de recyclage.

ITALIANO

Questo simbolo sui prodotto o sulla relativa confezione indica che il prodotto non va trattato come un riuto

domestico. In ottemperanza alla Direttiva UE 2002/96/EC sui riuti di apparecchiature elettriche ed

elettroniche (RAEE), questa prodotto elettrico non deve essere smaltito come riuto municipale misto. Si

prega di smaltire il prodotto riportandolo al punto vendita o al punto di raccolta municipale locale per un

opportuno riciclaggio.

POLSKI

Jeśli na produkcie lub jego opakowaniu umieszczono ten symbol, wówczas w czasie utylizacji nie wolno

wyrzucać tego produktu wraz z odpadami komunalnymi. Zgodnie z Dyrektywą Nr 2002/96/WE w sprawie

zużytego sprzętu elektrycznego i elektronicznego (WEEE), niniejszego produktu elektrycznego nie wolno

usuwać jako nie posortowanego odpadu komunalnego. Prosimy o usuniecie niniejszego produktu

poprzez jego zwrot do punktu zakupu lub oddanie do miejscowego komunalnego punktu zbiórki

odpadów przeznaczonych do recyklingu.

Page is loading ...

40

FEDERAL COMMUNICATIONS COMMISSION

REGULATORY STATEMENT

FCC Class B

This equipment has been tested and found to comply with the limits for a Class B digital device,

pursuant to Part 15 of Federal Communications Commission (FCC) Rules. These limits are designed

to provide reasonable protection against harmful interference in a residential installation. This

equipment generates, uses and can radiate radio frequency energy, and if not installed and used

in accordance with the instructions may cause harmful interference to radio communications.

However, there is no guarantee that interference will not occur in a particular installation. If this

equipment does cause harmful interference to radio or television reception, which can be determined

by turning the equipment o and on, the user is encouraged to try to correct the interference by one or

more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and the receiver.

• Connect the equipment to an outlet on a circuit dierent from the receiver.

• Consult the dealer or an experienced radio/TV technician for help.

R&TTE

ENGLISH

This device complies with the requirements of the R&TTE Directive 1999/5/EC.

DEUTSCH

Dieses Gerät enspricht der Direktive R&TTE Direktive 1999/5/EC.

ESPAÑOL

Este dispositivo cumple con los requerimientos de la Directiva R&TTE 1999/5/EC.

FRANÇAIS

Cet appareil satisfait aux exigences de la directive R&TTE 1999/5/CE.

POLSKI

Urządzenie spełnia wymagania dyrektywy R&TTE 1999/5/EC.

ITALIANO

Questo dispositivo è conforme alla Direttiva 1999/5/EC R&TTE.

Page is loading ...

INTELLINET NETWORK SOLUTIONS

™

oers a complete line of active and passive networking products.

Ask your local computer dealer for more information or visit www.intellinet-network.com.

All products mentioned are trademarks or registered trademarks of their respective owners.

INTELLINET NETWORK SOLUTIONS

™

bietet ein vollständiges Sortiment aktiver und passiver

Netzwerkkomponenten. Für weitere Informationen wenden Sie sich bitte an Ihren Händler oder

nutzen Sie die Webseite www.intellinet-network.com.

Alle erwähnten Produkte sind registrierte Marken und Eigentum Ihrer jeweiligen Besitzer.

INTELLINET NETWORK SOLUTIONS

™

ofrece una línea completa de productos de red activa y pasiva.

Pregunte a su distribuidor para obtener mayor informacion o visite:

www.intellinet-network.com.

Todos los productos mencionados son marcas comerciales o marcas registradas de sus respectivos propietarios.

INTELLINET NETWORK SOLUTIONS

™

ore un assortiment complet de produits de réseau actifs et

passifs. Pour plus d’informations veuillez contacter votre revendeur ou utiliser la page d’accueil

www.intellinet-network.com.

Tous les produits mentionnés sont des marques commerciales ou des marques déposées de leurs

propriétaires respectifs.

INTELLINET NETWORK SOLUTIONS

™

to kompletna linia aktywnych oraz pasywnych komponentów

sieciowych. Poproś lokalnego dealera o więcej informacji lub odwiedź stronę

www.intellinet-network.com.

Wszystkie nazwy handlowe i towarów są nazwami i znakami towarowymi

zastrzeżonymi odpowiednich rm odnośnych właścicieli.

INTELLINET NETWORK SOLUTIONS

™

ore una linea completa di prodotti di rete attivi e passivi.

Chiedi maggiori informazioni al tuo rivenditore di computer o visita il sito

www.intellinet-network.com.

Tutti i prodotti sopracitati sono marchi di fabbrica o marchi registrati depositati dai proprietari.

IC Intracom 503273 Installation guide

This manual is also suitable for

IC Intracom 503273 Installation guide

in other languages

Related papers

Other documents