Swordfish 40262 Operating instructions

Swordfish
Brand
Swordfish
Model
40262
Category
Paper cutters
Type
Operating instructions

This manual is also suitable for

Swordfish 40262 is a compact and stylish paper trimmer suitable for home and small office use. It has a maximum paper size of A3 and a cutting capacity of 1.0mm. The trimmer is easy to operate, simply slide the cutting head to either end of the guide rail, slide the paper under the plastic pressure clamp, and apply downward pressure to cut.

Here are some of the key features and possible use cases of the Swordfish 40262:

  • Compact and stylish design: The trimmer is small and lightweight, making it easy to store and transport. Its stylish design will complement any home or office décor.

Swordfish 40262 is a compact and stylish paper trimmer suitable for home and small office use. It has a maximum paper size of A3 and a cutting capacity of 1.0mm. The trimmer is easy to operate, simply slide the cutting head to either end of the guide rail, slide the paper under the plastic pressure clamp, and apply downward pressure to cut.

Here are some of the key features and possible use cases of the Swordfish 40262:

  • Compact and stylish design: The trimmer is small and lightweight, making it easy to store and transport. Its stylish design will complement any home or office décor.
ENGLISH
DEUTSCH
FRANÇAIS
ITALIANO
ESPAÑOL
NEDERLANDS
Operating Instructions
Bedienungsanleitung
Mode d’emploi
Istruzioni per l’uso
Instrucciones de funcionamiento
Instructies
Paper Trimmers
SlimLine Series
Operating Instructions
www.snopakebrands.com
Guide rail
End cap
Cutting head
(Code: 40264 Red)
(Code: 40265 Blue)
Plastic pressure clamp
Standard paper formats
For further information
or to register your product
visit www.snopakebrands.com
SCAN ME
2
Operating Instructions
www.snopakebrands.com
3
SPECIFICATIONS
Colour
Blue Red Blue Red
Suitability
Home & Small O ce
What makes it special?
Compact & Stylish
Swordfi sh UK
Product Code
40263 40262 40261 40260
Maximum Paper Size
A4 A3
Cutting Length (mm)
320 450
Cutting Capacity (mm)
1.0
Sheet Capacity (mm)
10
Replacement Cutting
Head Code
40265 40264 40265 40264
Replacement Cutting
Head Barcode
5019118008162 5019118008148 5019118008162 5019118008148
Product Dimensions
H x W x D inc box (mm)
200 x 452 x 77 200 x 452 x 77
Weight Inc Box (kg)
1.0 1.17
Product Warranty (years)
2
Operating Instructions
www.snopakebrands.com
CUTS UP TO
10
SHEETS
Tips
•
Operate on a  at, level surface which is larger than the trimmer itself
•
With your free hand, apply pressure with your free hand when cutting
•
Keep cutting head at one end of the guide rail when not in use
•
Clean the trimmer with a soft cloth, exercising caution around the blade
•
Remove staples or paperclips from paper before cutting
•
Do not attempt to cut more than 10 sheets of 80gsm paper
Operation
Slide cutting head to either end
of guide rail.
1
Slide paper under plastic pressure
clamp and position  ush with side
of trimmer.
2
Apply downward pressure and push
or pull the cutting head along the
guide rail.
3
4
Operating Instructions
www.snopakebrands.com
Warning
•
This is a 10-sheet (80gsm) trimmer. Do not overload!
•
Sharp blade - keep loose items and hands away
•
Suitable for trimming paper and light card only
•
Keep product out of reach of children
•
Never carry trimmer by the blade or guide rail
•
Do not immerse in water or other liquids
•
Never lubricate the cutting blade
•
Do not hang or wall-mount
•
Do not use outdoors
Replacing or realigning
the cutting head
✗
Remove the end cap by pushing
it upwards
Slide new cutting head onto guide rail
A. Rubber wheel should sit on top
of the plastic pressure clamp
B. Blade should run alongside
the metal cutting edge
Slide the guide rail through the
open end (1). You can now raise
the other end (2) to pull the
guide rail out completely
Replace guide rail and end cap
Do not touch the blade
2
1
1
3
2
4
5
A
B
Product Warranty
www.snopakebrands.com
Product Warranty
Sword sh Trimmers
SWORDFISH 2-YEARS LIMITED WARRANTY FOR PARTS AND LABOUR
Sword sh trimmers are warranted against failure or malfunction due to faulty components or workmanship for a period of 2 years from the date of purchase
by the original consumer. Defects or failures, which have been caused by incorrect or wrongful use, regardless whether unintentional or intentional during the
operation or maintenance of the device, are excluded from the warranty.
The only user-serviceable part of a Sword sh trimmer is the blade. As with all cutting instruments, dulling of the blade results from normal usage and is not
covered within the warranty. Replacement blades are available to purchase. Unauthorized repair or attempts to service the unit other than to change the blade
will invalidate the warranty.
Sword sh trimmers have been designed to cut only those materials outlined within the instructions. Non-compliance with Sword sh’s instructions will invalidate
the warranty.
For service of the unit under warranty, please return your Sword sh o ce machine with proof of purchase to your dealer or contact the Sword sh customer
service. In the event of returning the machine under warranty, suitable packaging must be used. Insu cient packaging resulting in damage will invalidate
the warranty.
Garantie du produit
Massicots Sword sh
SWORDFISH - 2 ANS DE GARANTIE SUR PIÈCES ET MAIN D’OEUVRE
Les massicots Sword sh fonctionnant sur secteur sont garanties contre les pannes et dysfonctionnements imputables à des composants défectueux ou à un vice
de fabrication pendant une période de 2 ans à partir de la date d’achat par le consommateur d’origine. Les panes et dysfonctionnements dus à une utilization
incorrecte ou erronée, intentionnelle ou non, ainsi que le non-respect des instructions de Sword sh pendant l’utilisation ou la maintenance de l’appareil
entraînent une exclusion de garantie.
La lame est la seule partie d’un massicot Sword sh dont l’utilisateur peut assurer l’entretien. Comme avec tous les instruments de coupe, la lame devient
émoussée à l’usage dans des conditions normales, ce que ne couvre pas la garantie. Des lames de rechange sont disponibles à l’achat. Toute réparation non
autorisée et toutes tentatives d’entretenir l’appareil auront pour e et d’invalider la garantie.
Les massicots Sword sh ont été conçus pour couper exclusivement les matériaux précisés dans le mode d’emploi. Le non-respect du mode d’emploi de Sword sh
invalidera la garantie.
Pour toute intervention sous garantie, merci de contacter le service après-vente de Sword sh ou de renvoyer au revendeur la machine de bureau accompagnée de
la preuve d’achat. Utiliser un emballage approprié pour renvoyer la machine sous garantie. Un conditionnement insu sant entraînant des dommages invalidera
la garantie.
Produktgarantie
Sword sh Schneidegeräte
SWORDFISH 2-JAHRE BEGRENZTE GARANTIE FÜR ERSATZEILE UND REPARATUR
Sword sh Schneidegeräte haben eine Garantie für 2 Jahre ab Original-Kaufdatum, die Versagen oder Funktionsstörungen infolge von Herstellungs- oder
Materialfehlern abdeckt. Beschädigungen oder Defekte, die durch falsche Bedienung, egal ob unbeabsichtigt oder beabsichtigt, oder durch Nichtbeachtung der
Anweisungen von Sword sh für Bedienung und Service entstehen, sind von dieser Garantie ausgeschlossen.
Das einzige vom Benutzer zu wartende Teil eines Sword sh Aktenvernichters ist die Klinge. Wie bei allen Schneideinstrumenten ist die Abnutzung der Klinge eine
Folge des normalen Gebrauchs und stellt keinen Garantiefall dar. Ersatzklingen sind käu ich zu erwerben. Unbefugte Reparaturen oder Wartungsversuche am
Gerät machen die Garantie ungültig.
Sword sh Schneidegeräte sind nur für die in der Bedienungsanleitung beschriebenen Materialien ausgelegt. Ein Verstoß gegen die Anleitungen von Sword sh
macht die Garantie ungültig.
Für Reparatur- oder Servicearbeiten während der Garantiezeit senden Sie die Sword sh Büromaschine bitte zusammen mit dem Kaufbeleg an Ihren Fachhändler
oder nehmen Sie Kontakt mit dem Kundendienst von Sword sh auf. Bei Rücksendung des Geräts während der Garantiezeit muss eine geeignete Verpackung
verwendet werden. Bei Beschädigung infolge unzureichender Verpackung wird die Garantie ungültig.
GB
DE
FR
6
Page is loading ...
www.snopakebrands.com
To fi nd out more information on the full range of products,
visit us at
www.snopakebrands.com
Pencil Sharpeners
Paper Shredders Document Laminators
Have you seen the rest of the
Swordfi sh range?
The Triple
1200XXCD
800XC
Pointi VariPoint
SuperSlim Series
A4
HyperSpeed
A3
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8

Swordfish 40262 Operating instructions

Swordfish
Brand
Swordfish
Model
40262
Category
Paper cutters
Type
Operating instructions
This manual is also suitable for

Swordfish 40262 is a compact and stylish paper trimmer suitable for home and small office use. It has a maximum paper size of A3 and a cutting capacity of 1.0mm. The trimmer is easy to operate, simply slide the cutting head to either end of the guide rail, slide the paper under the plastic pressure clamp, and apply downward pressure to cut.

Here are some of the key features and possible use cases of the Swordfish 40262:

  • Compact and stylish design: The trimmer is small and lightweight, making it easy to store and transport. Its stylish design will complement any home or office décor.
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

in other languages

Related papers

Other documents