Channel Master CM-3016 User guide

Category
Network antennas
Type
User guide

This manual is also suitable for

This page intentionally left blank.

Product Overview ....................................................................3
Package Contents and Accessories .....................................3
Danger Information .................................................................4
Antenna Assembly ...................................................................6
Operating Instructions ...........................................................10
Technical Data .......................................................................10
Product Return Policy and Warranty ................................... 11

Perspectiva General del Producto ...................................... 13
Contenido del Paquete y Accesorios ................................. 13
Información Sobre Peligros ................................................... 14
Montaje De Antena ..............................................................16
Instrucciones de Operación ................................................. 19
Datos Técnicos ....................................................................... 19
Garantía y Póliza para la Devolución del Producto..........20

Présentation du Produit .........................................................23
Contenu et Accessoires de L'emballage............................23
Conseils de Sécurité ...............................................................24
Assemblage De L'Antenne ...................................................26
Mode D'emploi ....................................................................... 30
Données Techniques .............................................................30
Politique de Reprise de Marchandise et Garantie ............ 31

All Channel Master Advantage Series Outdoor Antennas
are engineered to be easy to install and have been
optimized for receiving high band VHF, UHF, and
HDTV signals. Attention to detail has been taken into
consideration; every piece is smooth and machined to
ensure a safe, trouble-free installation. Every antenna
is made of the nest components to exceed consumer
expectations. That means peace of mind for years to
come.

Optimum reception for digital broadcasts
Easy installation - Unfold, mount, and connect
Economical
Long lasting, durable design:
- Spun boom ends reduce wind whistle
- Reinforced element sleeves for added strength
Easily mounts to a traditional antenna mast
Rooftop, eave, or wall mountable

All Digital Advantage™ antennas include:
Hardware
User Guide
Danger Label
75 Ohm matching transformer
Coaxial Cable and Mast not included
ADVANTAGE
antenna series


Please read this user's manual before operating this
product. The information contained in this document
is subject to change without notice. Features or
specications may be different depending on the type
of product model purchased.

READ INSTRUCTIONS





 Perform as much antenna assembly on the ground as
possible.
 Watch out for overhead power lines. Check the
distance to the power lines before you start installing.
WE RECOMMEND YOU STAY A MINIMUM OF TWICE THE
MAXIMUM LENGTH OF THE ANTENNA ASSEMBLY AWAY
FROM ALL POWER LINES.
 Do not use a metal ladder.
 Remember, even the slightest touch of an antenna to a
power line can cause a fatal shock.
 Do NOT try to do the job on a windy day.
 Have a friend as a spotter when you’re on the roof.
They can see things you can’t.
 If you start to drop an antenna, move away from it and
let it fall.
 If any part of the antenna should come into contact
with a power line 
They will remove it
safely.
 Mast, lead-in, and metal guy wires are excellent
conductors of electrical current - - keep them away
from power lines too.
 Be sure your family and friends understand the danger
of touching an overhead power line. Tell them never to
try to remove any object in contact with a power line
(TV antenna, mast or anything else).
 Make sure that the antenna mast assembly is properly
grounded.
For more information, visit
www.channelmaster.com/support.
ADVANTAGE
antenna series

 If the antenna has
a 2- or 3-section
crossarm boom,
assemble the
sections with
screws and wing
nuts. 
 For 3-section
antennas,
assemble with the
short elements to the front of antenna and the Iong
elements to the rear of antenna. When assembling,
push the front or rear sections into the center section
with the slot in the front or rear sections pushed against
the rivet, holding the insulator to the center section. This
will line up the holes for the screw and wing nut.
 Open all elements on the antenna. NOTE: The elements
on this antenna are tightly riveted. To avoid bending
the elements while opening, grip the elements near the
rivets. 
Fig 2 Fig 3
 Swing phasing rods (riveted to center section) into
position on the front section and secure with wing nuts.
Crossarm
Screw
Wing Nut
Fig 1
 NOTE: Do not attach transmission wire or
balun to these points. Transmission wire or balun are
attached to the bottom terminals of the folded UHF
dipole as shown in .
Phasing Rod
Terminal
Dipole
Fig 4
 Attach transmission wire (or balun, if coax installation)
to tap-off terminals at the bottom of the UHF dipole, as
shown in  (or if a straight UHF screw dipole).
Straight
UHF Dipole
Matching
Transformer
Coaxial
Cable
Folded
UHF Dipole
Tap-Off Terminals
Coaxial Cable
Matching Transformer
Fig 5
ADVANTAGE
antenna series
Straight
UHF Dipole
Matching
Transformer
Coaxial
Cable
Folded
UHF Dipole
Tap-Off Terminals
Coaxial Cable
Matching Transformer
Fig 6
 Fasten antenna to mast using U-bolt assembly as shown
in 
Fig 8
U-Bolt
Boom
Brace
Antenna
Crossarm
Antenna
Crossarm
Mast
Fig 7
 If the antenna has boom braces, secure them to the
mast below the antenna as shown in . NOTE: Make
sure the main crossarm is straight when tightening
U-bolt nuts securing the boom braces.
U-Bolt
Boom
Brace
Antenna
Crossarm
Antenna
Crossarm
Mast
Fig 9
 To align the antenna, point the narrow end of the
antenna towards the transmitter location and adjust for
best picture quality or signal strength. 
TOWARDS
TRANSMITTING
STATION
Fig 10
ADVANTAGE
antenna series


For best reception, please consider the following
conditions:
 Keep the antenna away from sources of interference,
including air conditioners, microwave ovens, hair
dryers, etc. These are all sources of strong electrical
interference, and can cause poor quality or total loss of
TV signals.
 Install the antenna as high as possible, and preferably
with a clear path between the antenna and the TV
station transmitters. Trees, buildings, mountains, etc.,
can all impact the performance of any antenna.


Designed for reception of HD digital TV signals
Frequency Range: 54-216, 470-700 MHz
Impedance: 75Ω
Gain:

Average Gain:
VHF Lo: 1.2 dB
VHF Hi: 7.9 dB
UHF: 7.7 dB
Number of Elements: 24

Average Gain:
VHF Lo: 3.6 dB
VHF Hi: 8.6 dB
UHF: 9.5 dB
Number of Elements: 50

Average Gain:
VHF Lo: 2.3 dB
VHF Hi: 8.2 dB
UHF: 8.4 dB
Number of Elements: 30


  90-day warranty applies to all Channel Master Products (Some
products have extended term warranty periods).  Dealers and
consumers can return any In-Warranty Channel Master product to the Warranty department
for repair or replacement. For In-Warranty service the consumer or dealer must call Technical
Service and request an RMA number in order to return the product. The returned product
must have the RMA number visible on the box and must include the bill of sale showing
the unit is within the warranty period. If the unit is found to be defective under our Warranty
Policy Channel Master will repair or replace the item at no charge. Products outside of
the warranty period should not be returned to Channel Master with the exception of any
product requested by Technical Support to be assessed for quality assurance purposes.
 www.channelmaster.com/support
  Subject to the provisions of this Warranty, CHANNEL
MASTER warrants that the equipment and software described in Paragraph 1.2 will conform
to our specications in all material respect and that the equipment will be free from material
defects in materials and workmanship during the Limited Warranty period.  This Warranty
applies to all original purchases by Customers of CHANNEL MASTER (“Equipment”).The
warranties set forth herein are not transferable.  The Effective period of this Warranty
will start on the date of purchase of the Equipment or the date of installation by a CHANNEL
MASTER approved technician and will end, for the Equipment, ninety (90) days later (for all
component parts and system upgrades), unless otherwise expressed or provided herein (in
each case the “Warranty Period”).
  If an item of Equipment malfunctions
or fails in normal use within the applicable Warranty Period:  the Customer shall notify
CHANNEL MASTER within thirty (30) days of the problem.  CHANNEL MASTER will,
at its option, either resolve the problem over the telephone or provide the customer with a
Return Authorization (“RMA”) Number and the address to which the customer may ship the
defective item;  If the problem can not be resolved over the telephone, the Customer shall
attach a label showing the RMA number to each returned item, and include a description
of the problem. The Customer shall, at his or her own cost, properly pack the item to be
returned, mark the RMA# on the outside of the box, prepay the insurance and shipping
charges, and ship the item to the specied CHANNEL MASTER location.  Unauthorized
return of any equipment, whether in or out of warranty, will be subject to a handling charge, in
addition to all repair and all transportation charges.  CHANNEL MASTER will, at its sole
option, repair or replace the returned item. If replaced, the replacement item may be new or
refurbished; if refurbished it will be equivalent in operation to new Equipment. If a returned
item is replaced by CHANNEL MASTER, the Customer agrees that the returned item will
become the property of CHANNEL MASTER.  CHANNEL MASTER will complete the
exchange of CHANNEL MASTER manufactured equipment returned under this Warranty
within a reasonable time, subject to lead-times from factory, and will make a good faith effort
to minimize any and all delays where possible; and  CHANNEL MASTER will, at its cost,
ship the repaired item or replacement to the Customer. If the Customer requests express
shipping, the Customer will pay CHANNEL MASTER an expediting fee.  Equipment
which is repaired or replaced by CHANNEL MASTER under this Warranty will be covered
under all of the provisions of this Warranty for the remainder of the applicable Warranty
period (for that particular equipment) from the date of repair or replacement, whichever is
longer.  If equipment is repaired beyond effective warranty dates or if abnormal usage
had occurred, Customer shall be charged applicable rates and the Customer will be advised
of the estimated charges prior to repair by CHANNEL MASTER ‘s authorized service center.
ADVANTAGE
antenna series

 The price of out-of-warranty repairs payable by the Customer will be based on standard
labor and parts prices in effect at the time of the repair. CHANNEL MASTER will use its best
efforts to ensure that the cost of such repair, exchange, refurbishing, or substitution will not
exceed the original price of Product.  If the problem reoccurs within the warranty period,
CHANNEL MASTER will, at its option:  re-perform the service;  replace the product
pursuant to the terms of this warranty, permit Customer to return the product and issue a
refund pursuant to this warranty, or  refund the amount the Customer paid for the services.
  CHANNEL MASTER reserves the right to make changes or
improvements to its products, during subsequent production, without incurring the obligation
to install such changes or improvements on previously manufactured or sold products.
  CHANNEL MASTER will not be liable if its performance under this
warranty becomes commercially impracticable due to any contingency beyond CHANNEL
MASTER’s reasonable control, including acts of God, res, ood, wars, sabotage, civil
unrest, accidents, labor disputes or shortages, government laws, rules and regulations,
whether valid or invalid, inability to obtain material, equipment or transportation, incorrect,
delayed or incomplete specications, drawings or data supplied by Customer (collectively
“Force Majeure”)
      This Limited Warranty
extends only to the original purchaser of the Equipment and is in lieu of all other express or
implied warranties, including those of merchantability and tness for a particular purpose.
This Warranty does not apply to any damage, defect of failure caused by:  any part of the
equipment having been modied, adapted, repaired, maintained, transported or relocated
by any person;  Storage or environmental characteristics which do not conform to the
applicable sections of the appropriate Equipment Manual or Instruction Sheet;  Failure
to conform with the Equipment Operating Instructions in the applicable Equipment Manual
or Instruction Sheet;  External causes, including external electrical stress or lightning,
or use in conjunction with incompatible equipment, unless such use was with CHANNEL
MASTER’s prior written request;  Cosmetic damage;  Accidental damage, negligence,
modication, mishandling, abuse or misuse; or  Force Majeure.
  THIS WARRANTY IS THE CUSTOMER’S EXCLUSIVE
WARRANTY FOR THE EQUIPMENT, CHANNEL MASTER SPECIFICALLY DISCLAIMS
ALL OTHER WARRANTIES OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING ANY
WARRANTIES OF FITNESS FOR A PARTICULAR PURPOSE AND OF MERCHANTABILITY.
 CHANNEL MASTER WILL NOT BE LIABLE IN TORT, INCLUDING LIABILITY IN
NEGLIGENCE OR STRICT LIABILITY, AND WILL HAVE NO LIABILITY AT ALL FOR
INJURY TO PERSONS OR PROPERTY. CHANNEL MASTER’S LIABILITY FOR FAILURE
TO FULFILL ITS OBLIGATIONS UNDER THIS WARRANTY OR ANY OTHER LIABILITY
UNDER OR IN CONNECTION WITH THE EQUIPMENT WILL BE LIMITED TO THE
AMOUNT OF THE PURCHASE PRICE OF THE EQUIPMENT AT THE TIME OF ORIGINAL
PURCHASE. THE REMEDIES STATED IN THIS WARRANTY ARE THE CUSTOMER’S
EXCLUSIVE REMEDIES AGAINST CHANNEL MASTER REGARDING THE EQUIPMENT.
 EVEN IF CHANNEL MASTER HAS BEEN NOTIFIED OF THE POSSIBILITY OF THEM,
CHANNEL MASTER WILL NOT BE LIABLE FOR ANY INDIRECT, INCIDENTAL, SPECIAL
OR CONSEQUENTIAL DAMAGES, INCLUDING LOST PROFITS AND REVENUES,
FAILURE TO REALIZE EXPECTED SAVINGS, ANY CLAIM AGAINST A CUSTOMER BY A
THIRD PARTY, OR ANY OTHER COMMERCIAL OR ECONOMIC LOSSES OF ANY KIND.
 THESE LIMITATIONS AND DISCLAIMERS ARE NOT MADE BY CHANNEL MASTER
WHERE PROHIBITED BY LAW.
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36

Channel Master CM-3016 User guide

Category
Network antennas
Type
User guide
This manual is also suitable for

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI