Seg SB 1200 Operating instructions

Page is loading ...

Content

Safety Precaution .........................................................................................2

1. Reference .................................................................................................4

1.1 General Features ............................................................................4

1.2 Accessories ...................................................................................5

2. Basic Functions........................................................................................6

2.1 Front Panel .....................................................................................6

2.2 Rear Panel ......................................................................................7

2.3 Remote Control Unit (RCU) ..........................................................8

3. Installation and Connection ...................................................................10

3.1 Connecting to TV.........................................................................10

3.2 Connecting to Dish LNB..............................................................11

4. Installation and Operation......................................................................14

4.1 Menu Guide .................................................................................14

4.1.1 Installation.........................................................................15

4.1.2 Service Organizing............................................................21

4.1.3 STB Setting.......................................................................23

4.1.4 STB Status.........................................................................26

4.2 Other Useful Information.............................................................26

5. Additional Information...........................................................................31

5.1 Problem Shooting.........................................................................31

5.2 Technical Specification Tuner & Demodulator............................32

5.3 Menu Screen Structure.................................................................33

5.4 Glossary .......................................................................................34

2



Safety Precaution

This STB has been designed and manufactured to satisfy the international safety

standards. Please read the following safety precautions carefully before operating this

receiver.

Before installing your digital satellite receiver, all security and operating instructions should

be read carefully. The User’s Manual should be retained for future reference.

All operating and using instructions should be followed.

Never allow children to operate this electrical device without supervisor.

 Main Supply:

Before operating, please check the units operating voltage is 100~240V AC 50/60Hz.

If the device or the power socket or its electrical connection is damaged, immediately

unplug the product from the mains supply socket. Do not try to open or repair the receiver

on your own! Service must be carried out only by experts at a proper service centre.

If replacement parts are required, only original components are allowed to use. The use of

unauthorised components may result in risk of fire and electric shock.

Image interfaces by programmes with a frequency of approx. 12480 MHz (DSF etc.) can

possibly be caused by cellular phones, which are located near the receiver or the antenna

cable. If so the distance between receiver and telephone should be enlarged until the

problems stop to emerge.

 Overload:

Do not overload a wall outlet, extension cord or adapter, neither use damaged power cord

or touch it with wet hand as this may result in electric shock.

 Liquid:

The receiver shall not be exposed to dripping or splashing water, and that no objects filled

with liquids, such as base, shall be placed on the apparatus.

 Environment:

Protect the receiver against humidity, heat and cold. Allow 10cm space around the receiver

3

for sufficient ventilation. Do not cover the receiver’s ventilation openings with items like

newspapers, tablecloths, curtains, etc. .

Do not place any objects filled with liquids, such as vases, on the satellite-receiver.

Take care that no foreign bodies or liquids are getting into the device.

Do not expose the set-top-box (receiver) to dripping or splashing liquids.

 Ventilation:

Keep the slots on top of the receiver uncover to allow sufficient airflow to the unit. Do not

put the receiver on soft furnishings or carpets. Do not expose the receiver to direct light or

do not place it near a heater or in humid conditions. Do not stack other electronic

equipments on top of the receiver.

 Cleaning:

Plug out the receiver from the wall outlet before cleaning. Clean the receiver by a soft,

damp cloth; do not use any washing-up liquids that affect the casing; do not spray any

cleaner towards the receiver.

 Connection:

Disconnect the receiver from the mains when you connect it to satellite LNB or disconnect

it from LNB. Failure would possibly cause damage to the LNB.

 Location:

Put the receiver indoor in order to avoid lightening, raining or sunlight.

In touch with certain furniture surfaces it may happen that the receiver’s feet may rub off.

You should place the device on a proper underground that is stable and not

easily

inflammatory. Otherwise the receiver may fall and cause serious injury to people and

serious damages to the device.

Do not use this product near water (e.g. bath tube, wash bowl, …).

Image interference at programmes with a frequency of approx. 12480 MHz may be caused

by cellular phones, which are located close to the receiver or the antenna cable. If so the

distance between receiver and telephone should be enlarged until the problems disappear.

 Uncover:

Do not remove the cover, to reduce the risk of electric shock. Contact qualified and licensed

service personnel to repair the receiver, or contact your dealer.

4

1. Reference

1.1 General Features

MPEG-2 & Fully DVB Compliant

MPEG-2 Video (MP@ML), MPEG-1 Audio Layer1, Layer2

Multi LNB Control by DiSEqC 1.0, USALS

LNB Power 13/18V Max 300mA

SCPC/MCPC Receivable from C / Ku-Band Satellites

Digital Tuner

PAL/NTSC Conversion

Variable Aspect Ratio (4:3, 16:9) for TV

User-friendly OSD Menu with Full Function

256 Colors Graphic User Interface

Multi Language Menu (German / English / Italian / French / Spanish )

Daily and weekly EPG (Electronic Program Guide) available for On-Screen Channel

Information

Multi-picture

Super Fast 800 Pages OSD Teletext Supported and VBI Teletext Inserted

Favorite Channel and Parental Lock Function

Storing 6000 Channels.

5 Kinds of Sort Function

5

1.2 Accessories

 User’s Manual

 Remote Control Unit

 Batteries

Figure 1. Accessories

6

2. Basic Functions

2.1 Front Panel

Figure 2. Front Panel

1. Power LED

Power indicator.

7

2.2 Rear Panel

Figure 3. Rear Panel

1. LNB IN： Connect to the Satellite Dish LNB.

2. TV SCART： Connect to TV set with Scart cable.

3. COAXIAL: Digital Audio output.

4. ON/Off :Power on/Off.

8

2.3 Remote Control Unit (RCU)

You can control this receiver by this remote controller with full function.

1. POWER:

Switch the receiver on or set it to standby mode.

2. MUTE: Turn the sound On/Off.

3. NUMERIC KEY (0~9):

Change program or input number.

4. TV/R:

Switch between TV and RADIO.

5. SAT:

Show the scanned satellite list.

6. EPG (Electronic Program Guide):

Show the TV/Radio program guide.

7. MENU:

Activate main menu or exit to live channel.

8. PRS/T:

Change program.

9. VOLW/X:

Change volume in viewing mode.

10. OK:

Confirm the highlighted menu item.

Open the program list.

11. FAV:

To get favorite channel list you set before.

12. EXIT:

Exit current menu step by step.

13. AUDIO:

Select or change the Audio.

Figure 4. Remote Control

9

14. INFO:

Show the information of the current channel.

Press EXIT button to exit this menu.

15.

Page up/down on menu.

16. RECALL:

Move to the last channel.

17. ZOOM:

Picture Zooming function.

18. PAUSE:

Freeze the picture.

19. Sleep:

Setting the time for turning off the receiver

20. SUB:

Showing Subtitle information if the channels contains.

21. :

Activate Multi-picture menu and select picture

22. TEXT:

Show the teletext content if teletext is transmitted.

23. F1: 23. F1:

Not in use

10

3. Installation and Connection

The following diagram shows you the right connections among receiver, TV, LNB and other

equipments, please read this first if you are not sure about the connection, and it will guide

you to the correct connection.

3.1 Connecting to TV

Figure 5. Connecting to TV

11

3.2 Connecting to Dish LNB

You can connect one fixed dish directly to the LNB IN connector, or connect at least two

dishes by using DiSEqC Switch, you can also connect to HH mount dish.

Figure 6. Connecting to Dish LNB

12

Figure 7. Connecting to Dish LNB

Before connecting to the power supply the receiver must be cabled completely.

Attention: The total current consumption of all devices (LNB, multiswitch, …) connected to the

LNB-Input must not exceed 400mA. The connected antenna must be grounded correctly. Please

note the VDE prescriptions.

Warning: If, after connecting the receiver to the mains, the message ”short circuit or

antenna input overload!” is displayed on the screen, then there is a short circuit in

13

the LNB cable or the LNB. In this case the receiver must be disconnected from the

mains immediately until the short circuit has been dealt with.

14

4. Installation and Operation

After connecting the

receiver to other required

equipment, turn on the

receiver, there should be no

channel information available

at the first startup; you need to

follow the procedure to set up

your receiver to search the

channel.

4.1 Menu Guide

During the installation there is short information showed at the

bottom of the menu screen which will guide you to set up, after finishing

installation, you can enjoy watching TV or listening to Radio.

--Main Menu--Installation

Main Menu

Press MENU button to activate main menu, main menu consists of

Installation, Service Organizing, STB Setting and STB Status.

Use UP/DOWN button to select your subject and press OK to confirm

your selection and enter that sub menu, press EXIT button you can

return to the previous menu.

15

4.1.1 Installation

Select Installation, press OK

button to activate Installation

menu, the Installation window

will be displayed.

Antenna setting

 Satellite list

This window shows the

pre-stored satellite list, you

can change satellite by ,

press OK to select the satellite

you want.

Here you can also

use Blind Search by pressing

the red button.

 Transponder

If you change the satellite, the

transponder will be changed

automatically. You will find the

transponder list of the selected

satellite here.

16

 DiSEqC Setting

If you connect antenna to

DiSEqC Switch, you need to

specify the DiSEqC input to

which your selected satellite

have been configured.

 Motor

When you enable this option,

you will get this window to

show you how to align the

dish.

Position Auto [W/E]

Press W /X button, the dish

will be motorized to East/West

continuously,

it will stop until it find the best signal.

 Move Dish

Press W /X button, the dish will be motorized to East/West step by step

until you find the best signal showed on the signal bar.

 Fine Tuning

Set the moving step

 Move Step

Move East or West step by step

 Limit Set

17

Disable or enable West limit or East limit

 Store Position

Automatic Satellites Search

Save the current position you

searched.

 Go to Position

Press OK button to move the

dish to the stored position.

 Go to Reference

Press OK button to move the

dish to 0 position.

Press EXIT after setup, and you can search channel now.

Automatic Satellites Search

Select one satellite, and press OK to mark. You can select more

satellites at one time, but make sure they are all configured to your

DiSEqC Switch. Then choose Scan All Channel, Scan Free Channel and

Blind Scan to start the channel searching. During the searching, TV

Channels and Radio Channels

will pop up automatically on

the screen in two separate

lists.

Manual TP Search

Press OK button to enter the

Manual TP Search Menu, here

you have to set up all data

18

manually step by step. Firstly you need to select one satellite with which

your dish is aligned, then select the frequency. Next step, you need to set

up the Polarization of that selected transponder, symbol rate, FEC,

Network search (if the transponder contains this function), if you know

the PID figure for that channel, you can input and search by this way.

19

Transfer Data

PLEASE NOTE: This function is only for authorised service partner!

Here you can transfer Main Software or Channel Data from PC to STB by

Uart Cable

20

Reset Factory Default

You can erase all the

channels and settings you

made by selecting RESET

ALL, or you can erase

Channel List/ Radio List/

Scramble Channel

seperately by choosing the

right option.. You also can

save or load channels under this menu.

USALS Setting

You can set up the Dish to

align with the satellite you

want to search, you need to

check the detailed

information from internet

and input the accurate

parameters according to

your current location.

Update Via Satellite

The software on this

receiver can be updated by

OTA. Choose the right

satellite and transponder to get the update software from satellite

Page is loading ...

Seg SB 1200 Operating instructions

Seg SB 1200 Operating instructions

in other languages

Related papers

Other documents