Graco 406902B User manual

Graco
Brand
Graco
Model
406902B
Category
Kitchen & houseware accessories
Type
User manual

This manual is also suitable for

GENUINE GRACO PARTS AND ACCESSORIES
Glazing Nozzle Kits
Finex
™
Mini Gravity Feed Guns (1 mm Nozzles)
406902B
ENG
Kit 24F733 Kit 24F734
Installation
1. Remove air cap (A), nozzle (B), and air distributor
(C) from Mini-Finex gun.
2. Turn fluid control knob (D) counterclockwise until
fully open. Screw glazing nozzle (101) into gun and
tighten.
3. If air cap is to be used, install o-ring (103) in air cap
(102). Tighten air cap onto gun. Be sure to fully seat
the air cap on the gun so the o-ring will form to the
gun body.
Operation
Kit 24F733 only: Gun will function as a gravity feed dis-
penser.
Kit 24F733 + Kit 24F734: Addition of the air cap causes
gun to spatter the fluid for more area coverage. Use only
as much air pressure as needed. Do not exceed 30 psi
at the gun inlet. Excessive air pressure will cause signifi-
cant overspray and material waste.
Important Safety Instructions
Read all warnings and instructions in manual
312388. Save all instructions.
Ref. Description Qty.
101 NOZZLE, glazing 1
Ref. Description Qty.
102 AIR CAP, for glazing nozzle 1
103 O-RING 1
A
B
C
ti16209a
101
ti16210a
D
102
103
ti16211a ti16212a
Graco Inc. P.O. Box 1441 Minneapolis, MN 55440-1441
Original instructions. This manual contains English. MM 406902
Copyright 2010, Graco Inc. is registered to ISO 9001
Revised 12-2010
  • Page 1 1

Graco 406902B User manual

Graco
Brand
Graco
Model
406902B
Category
Kitchen & houseware accessories
Type
User manual
This manual is also suitable for
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents