Kohler K-9446-G Installation guide

Kohler
Brand
Kohler
Model
K-9446-G
Type
Installation guide

This manual is also suitable for

Kohler K-9446-G is a trip lever kit designed for use with Kohler toilets. It features a durable construction and a simple installation process. The kit includes all the necessary hardware for installation, including a lift rod, washers, and nuts. The trip lever is compatible with both one-piece and two-piece toilets, making it a versatile choice for various bathroom configurations.

Kohler K-9446-G is a trip lever kit designed for use with Kohler toilets. It features a durable construction and a simple installation process. The kit includes all the necessary hardware for installation, including a lift rod, washers, and nuts. The trip lever is compatible with both one-piece and two-piece toilets, making it a versatile choice for various bathroom configurations.

Installation Guide
Trip Lever Kit
M product numbers are for Mexico (i.e. K-12345M)
Los números de productos seguidos de
M corresponden a México (Ej.
K-12345M)
Français, page“ Français-1”
Español, página“ Español-1”
K-9446, K-9447
1017838-2-C
Thank You For Choosing Kohler Company
We appreciate your commitment to Kohler quality. Please take a few
minutes to review this manual before you start installation. If you
encounter any installation or performance problems please don’t
hesitate to contact us. Our phone numbers and website are listed on
the back cover. Thanks again for choosing Kohler Company.
Tools and Materials
Before You Begin
Observe all local plumbing codes and building codes.
Kohler Co. reserves the right to make revisions in the design of
trip levers without notice, as specified within the Price Book.
Adjustable
Wrench
1017838-2-C 2 Kohler Co.
Install New Trip Lever
Remove the tank cover from the toilet.
Insert the lift rod into the hole in the center of the tank cover
with the washer and nut on the inside edge.
For one piece toilet installations, the lower end of the lift rod
should point toward the front of the tank. For two piece toilet
installations, align the lift rod.
Hand tighten the nut and then wrench tighten it an additional
1/4 turn.
Check for smooth operation and flush actuation.
Replace the tank cover.
1 Piece Toilet 2 Piece Toilet
TankTank
Lift Rod
Tank CoverTank Cover
Lift Rod
Nut Nut
Washer Washer
Kohler Co. 3 1017838-2-C
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
USA: 1-800-4-KOHLER
Canada: 1-800-964-5590
México: 001-877-680-1310
kohler.com
©2004 Kohler Co.
1017838-2-C
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8

Kohler K-9446-G Installation guide

Kohler
Brand
Kohler
Model
K-9446-G
Type
Installation guide
This manual is also suitable for

Kohler K-9446-G is a trip lever kit designed for use with Kohler toilets. It features a durable construction and a simple installation process. The kit includes all the necessary hardware for installation, including a lift rod, washers, and nuts. The trip lever is compatible with both one-piece and two-piece toilets, making it a versatile choice for various bathroom configurations.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

in other languages

Related papers

Other documents