Kohler K-14266-WF-96 Installation guide

Brand: Kohler

Model: K-14266-WF-96

Category: Sanitary ware

Type: Installation guide

Kohler K-14266-WF-96

The Kohler K-14266-WF-96 is a vitreous china pedestal lavatory that combines style and functionality. Crafted from durable vitreous china, this lavatory features a pedestal design that adds a touch of elegance to any bathroom. Its spacious basin provides ample room for everyday use, while the smooth, non-porous surface resists stains and bacteria, ensuring easy cleaning and maintenance.

Designed for both residential and commercial applications, the Kohler K-14266-WF-96 is easy to install and maintain. It comes equipped with a 3-hole faucet mount, allowing you to customize your bathroom with a faucet of your choice. The pedestal includes pre-drilled holes for secure mounting, ensuring stability and preventing wobbling.

Kohler K-14266-WF-96



113504-2-AA (A)

1998 Kohler Co.

ANATOLE

VITREOUS CHINA

PEDESTAL LAVATORY



BEFORE YOU BEGIN

NOTES

 Observe all local plumbing and

building codes.

 Prior to installation, unpack the

new lavatory and inspect it for

damage. Return the lavatory to

its protective carton until you

are ready to install it.

 These instructions are for

installing the lavatory to wood

frame construction. For other

installations, supply suitable

bracing and fastening devices

of sufficient size and strength.

 The walls and floor must be

square, plumb, and level.

ROUGHING-IN

(S) Supply 10” (Based on 12” riser

which may require cutting).

(T) Pop-up drain typically 14-1/8”.

Fixture dimensions are nominal and

conform to tolerances in ASME

Standard A112.19.2M.

4”

3/8” COLD

1-1/4” OUTLET

3/8” HOT

(S)

(T)

2-7/8”

8”

7-1/4”

FINISHED

WALL

1/2” D. MOUNTING

HOLE IN PEDESTAL

FINISHED

WALL

FINISHED

FLOOR

15”

18-1/4”

21-3/4”

11-3/8”

3-1/2”

8-1/2”

31-7/8”

6-1/8”

1/2” D.

ANCHOR

HOLES

4”

K-2099-4

4”

2-7/8”

4”

2-7/8”

K-2099-1

K-2099-8

113504-2-AA (A)

2 Kohler Co., Kohler, WI

TOOLS AND MATERIALS

REQUIRED

 Level

 Drill with assorted bits

 Socket wrench with 8”

extension and assorted sockets

 Tape measure

 Framing square

INSTALLATION

 Rough-in the supplies and

drain piping and trap.

NOTE: The supply stop handles

cannot extend more than 5” from the

finished wall when in the open

position.

 Install sufficient backing behind

the finished wall to provide a

secure material for the

anchoring devices.

 Apply five self-adhesive

gaskets (provided) to the top

edge of the pedestal.

Gasket

Top of Pedestal

 Mark the centerline on the floor.

 Position the pedestal on the

floor centerline so the mounting

hole is approximately 7-1/4”

from the finished wall.

 Carefully set the lavatory on the

pedestal.

 Move the pedestal as required

to ensure proper fit in the

desired location.

 Level the lavatory. Add more

self-adhesive gaskets as

needed to level the lavatory.

NOTE: The lavatory must be

supported by the pedestal.

 Check the lavatory placement.

 Mark the center of each

anchoring hole on the wall, and

mark the floor through the hole

in the pedestal bottom.

 Carefully remove the lavatory

from the pedestal. Then move

the pedestal from the area.

Mark Floor

Here

Pedestal

Finished

Wall

Anchoring

Holes

Kohler Co., Kohler, WI

113504-2-

AA (A)

 Drill a 1/4” mounting hole at the

mark on the floor, then drill two

1/4” hanger bolt holes at the

marks on the wall.

 Mount hanger bolts to the wall

so approximately 3/4” of each

bolt remains exposed.

NOTE: Other fastening devices of

sufficient size and strength may also

be used.

Finished Wall

Hanger

Bolts

 Install the faucet and drain to

the lavatory according to the

manufacturer’s instructions.

NOTE: Do not fully tighten slip-joint

drain connections at this time.

 Position the pedestal mounting

hole over the hole in the floor.

 Secure the pedestal to the floor

with the wood screw and

washer. Tighten the screw until

it is snug.

CAUTION: Risk of product

damage. Do not overtighten.

Overtightening may cause

damage to the product.

Pedestal

Wood Screw

Washer

 Set the lavatory on the pedestal

so the hanger bolts extend

through the lavatory holes.

 Level the lavatory.

 Install the cap nuts and

washers, and tighten until snug.

CAUTION: Risk of product

damage. Do not overtighten the

cap nuts. Overtightening may

cause damage to the product.

 Connect and tighten the trap to

drain. Connect the hot and cold

water supplies to the faucet.

Finished

Wall

Hanger

Bolts

Cap Nut

Washer

Lavatory

Pedestal

113504-2-AA (A)

4 Kohler Co., Kohler, WI

IMPORTANT CONSUMER INFORMATION

CARE AND CLEANING

To keep your lavatory looking new, make sure you rinse it out thoroughly after each use.

DO NOT USE ABRASIVES on this product, as they will scratch and ruin the surface.

Stubborn stains, paint, or tar can be removed with turpentine or paint thinner.

REQUESTING SERVICE

Please take a moment to familiarize yourself with the Kohler Warranty, its benefits, and

limitations. Kohler Co. and its distributors support you with one of the largest Service

Networks of its type. Here’s what you need to do if you require service:

FIRST: Contact the dealer or contractor who sold and installed the product. They

should be able to solve any problems you may have.

SECOND: If your dealer or contractor cannot solve the problem, they will contact or

supply you with the name of the local Kohler Distributor and the:

KOHLER TECHNICAL SPECIALIST

THIRD: If you are unable to obtain warranty service through either your

contractor or Kohler Co. distributor, please write us directly at Kohler Co.,

Attn: Customer Service Department, Kohler, WI 53044 U.S.A.

FOURTH: Include all pertinent information regarding your claim, including a

complete description of the product, model numbers, colors, finishes,

and the date the product was installed. Include a description of the

problem, and a photocopy of your invoice for the products involved. Also

give us the name of the contractor and distributor.

LIMITED ONE-YEAR WARRANTY

Kohler plumbing fixtures and fittings are warranted free of manufacturing defects.

Kohler Co. will, at its election repair, replace, or make appropriate adjustment where

Kohler Co. inspection discloses any such defects occurring in normal usage within one

year after installation. Kohler Co. is not responsible for installation costs.

To obtain warranty service, contact Kohler Co. either through your Dealer or Plumbing

Contractor or by writing Kohler Co., Attn: Customer Service Department, Kohler, WI

53044 U.S.A.

Implied warranties, including that of merchantability and fitness for a particular

purpose, are expressly limited in duration to the duration of this warranty. To the

extent permitted by law, Kohler Co. disclaims all implied warranties including

merchantability and fitness for a particular purpose. Kohler Co. disclaims any

liability for special, incidental, or consequential damages.

Some states do not allow limitations on how long an implied warranty lasts or the

exclusion or limitation of incidental or consequential damages, so this limitation and

exclusion may not apply to you. This warranty gives you specific legal rights. You may

also have rights which vary from state to state.

This is our exclusive written warranty.

KOHLER CO., KOHLER, WISCONSIN 53044

Kohler K-14266-WF-96 Installation guide

Brand: Kohler

Model: K-14266-WF-96

Category: Sanitary ware

Type: Installation guide

Kohler K-14266-WF-96

Download PDF

report

Kohler K-14266-WF-96 Installation guide

Kohler K-14266-WF-96 Installation guide

Related papers

Other documents