Chief FVS150 Installation guide

Brand: Chief

Model: FVS150

Category: Mounting kits

Type: Installation guide

This manual is also suitable for

FVS100

Chief FVS150 is a camera shelf designed for video conferencing setups. It offers a weight capacity of 10 lbs (4.5 kg) and is compatible with displays of various sizes. The FVS150 features a 13.64 inches (346 mm) minimum extension and a 19.14 inches (486 mm) maximum extension, providing flexibility in positioning the camera. The shelf can be adjusted up or down in 7/8" increments, allowing for precise camera placement. Installation is simple and can be done with the display attached or removed.

INSTALLATION INSTRUCTIONS

FVS100

FVS150

Lower Video Conference Camera Shelf

Spanish Product Description

German Product Description

Portuguese Product Description

Italian Product Description

Dutch Product Description

French Product Description

FVS100 / FVS150

FVS100 / FVS150 Installation Instructions

DISCLAIMER

Milestone AV Technologies and its affiliated corporations and

subsidiaries (collectively "Milestone"), intend to make this

manual accurate and complete. However, Milestone makes no

claim that the information contained herein covers all details,

conditions or variations, nor does it provide for every possible

contingency in connection with the installation or use of this

product. The information contained in this document is subject

to change without notice or obligation of any kind. Milestone

makes no representation of warranty, expressed or implied,

regarding the information contained herein. Milestone assumes

no responsibility for accuracy, completeness or sufficiency of

the information contained in this document.

Chief® is a registered trademark of Milestone AV Technologies.

IMPORTANT WARNINGS AND

CAUTIONS!

WARNING: A WARNING alerts you to the possibility of

serious injury or death if you do not follow the instructions.

CAUTION: A CAUTION alerts you to the possibility of

damage or destruction of equipment if you do not follow the

corresponding instructions.

WARNING: Failure to read, thoroughly understand, and

follow all instructions can result in serious personal injury,

damage to equipment, or voiding of factory warranty! It is the

installer’s responsibility to make sure all components are

properly assembled and installed using the instructions

provided.

WARNING: Failure to provide adequate structural strength

for this component can result in serious personal injury or

damage to equipment! It is the installer’s responsibility to

make sure the structure to which this component is attached

can support five times the combined weight of all equipment.

Reinforce the structure as required before installing the

component.

WARNING: Exceeding the weight capacity can result in

serious personal injury or damage to equipment! It is the

installer’s responsibility to make sure the combined weight of

all components located on the FVS100/FVS150 does not

exceed 10 lbs (4.5 kg).

LEGEND

Tighten Fastener

Apretar elemento de fijación

Befestigungsteil festziehen

Apertar fixador

Serrare il fissaggio

Bevestiging vastdraaien

Serrez les fixations

Loosen Fastener

Aflojar elemento de fijación

Befestigungsteil lösen

Desapertar fixador

Allentare il fissaggio

Bevestiging losdraaien

Desserrez les fixations

Pencil Mark

Marcar con lápiz

Stiftmarkierung

Marcar com lápis

Segno a matita

Potloodmerkteken

Marquage au crayon

Phillips Screwdriver

Destornillador Phillips

Kreuzschlitzschraubendreher

Chave de fendas Phillips

Cacciavite a stella

Kruiskopschroevendraaier

Tournevis à pointe cruciforme

Installation Instructions FVS100 / FVS150

DIMENSIONS

11.34

288

88.9

3.50

13.56

MINIMUM

EXTENSION

344.5

3.50

88.9

19.69

MAXIMUM

EXTENSION

500.1

11.9

1.60

40.8

.47

5.40

137.2

308.3

12.14

22.2

.88

13.2

335.3

USABLE SHELF DEPTH

11.2" - SCREEN DEPTH

WEIGHT CAPACITY 10 LBS.

27.3

3.50

88.9

203.2

2.00

50.8

8.00

2.00

.28

7.1

1.07

5.57

141.6

CENTERLINE OF

MOUNT

FVS100

3.5

19.69

MAXIMUM

EXTENSION

500

3.5

13.64

MINIMUM

EXTENSION

346

USABLE SHELF DEPTH

11.2" - SCREEN DEPTH

WEIGHT CAPACITY 10 LBS.

101

3.96

137

5.40

1.60

2.00

88.9

305

6.00

12.00

152

.28

3.50

127

5.00

141.6

5.57

1.07

27.3

CENTERLINE OF

MOUNT

16.19

411

19.14

486

13.2

256

335

.61

10.06

2.07

13.01

331

2.00

FVS150

FVS100 / FVS150 Installation Instructions

TOOLS REQUIRED FOR INSTALLATION

PARTS

E (4)

10-24 x 5/8"

F (2)

10-24 x 1"

A (1)

B (1)

C (1)

[FVS100 only]

D (1)

[FVS150 only]

Installation Instructions FVS100 / FVS150

Assembly and Installation

Assembling Shelf and Brackets

1. Attach lower shelf (C or D) to hanger bracket (B) using four

10-24 x 5/8" Phillips pan head screws (E). (See Figure 1)

Figure 1

Attaching to Wall Mount

NOTE: The FVS100/FVS150 may be attached to the wall

mount with the display already in place, or with the

display removed. Proceed to either Installing to Wall

Mount with Display Attached or Installing to Wall

Mount with Display Removed section.

Installing to Wall Mount with Display Attached

1. Pull out bottom of display.

2. From below and behind the display, raise and hang hook

bracket (A) onto lower wall mount rail. (See Figure 2)

Figure 2

3. Hang shelf with hanger bracket onto the hook bracket (A).

(See Figure 3)

NOTE: The shelf with hanger bracket may be adjusted up or

down on the hook bracket (A) in 7/8" increments for a

total height adjustment of up to 6.05".

Figure 3

NOTE: Proceed to Installing Camera section.

Installing to Wall Mount with Display Removed

NOTE: Installing the FVS100/FVS150 to a wall mount where a

display has been removed allows use of security

screws to prevent the FVS100/FVS150 from being

removed.

1. Hang shelf with hanger bracket onto the hook bracket (A).

(See Figure 4)

[FVS100 shown]

(B)

(E) x 4

(C)

(A)

[Display shown removed for clarity]

Wall Mount

(A)

[Display shown removed for clarity]

FVS100 / FVS150 Installation Instructions

Figure 4

NOTE: The shelf with hanger bracket may be adjusted up or

down on the hook bracket (A) in 7/8" increments for a

total height adjustment of up to 6.05".

2. Remove display if already attached to wall mount following

instructions included with the wall mount.

3. Hang FVS100/FVS150 on lower wall mount rail.

4. Adjust location and secure to wall mount rail using two

10-24 x 1" Phillips pan head screws (F). (See Figure 5)

Figure 5

5. Hang display on wall mount following installation

instructions included with the wall mounts.

Installing Camera

1. Install camera to shelf.

NOTE: If camera has a bottom mounting screw, attach it

through the mounting slot in the shelf. (See Figure 6)

2. Route cable from camera. (See Figure 6)

NOTE: Cable may be routed using the cable clip on the

underside of the shelf. Secure the cable at the cable

clip with a wire tie (not included). (See Figure 6)

Figure 6

(A)

Shelf with

hanger

bracket

[FVS100 shown]

(F) x 2

Cable Clip

Routing Cable

Camera Mounting Slot

Installation Instructions FVS100 / FVS150

FVS100 / FVS150 Installation Instructions

USA/International A 8401 Eagle Creek Parkway, Savage, MN 55378

P 800.582.6480 / 952.894.6280

F 877.894.6918 / 952.894.6918

Europe A Fellenoord 130 5611 ZB EINDHOVEN, The Netherlands

P +31 (0)40 2668620

F +31 (0)40 2668615

Asia Pacific A Room 24F, Block D, Lily YinDu International Building

LuoGang, BuJi Town, Shenzhen, CHINA.

P +86-755-8996 9226

F +86-755-8996 9217

Chief Manufacturing, a products division

of Milestone AV Technologies

8807-000081 Rev01

2009 Milestone AV Technologies,

a Duchossois Group Company

www.chiefmfg.com

01/09

Chief FVS150 Installation guide

Brand: Chief

Model: FVS150

Category: Mounting kits

Type: Installation guide

This manual is also suitable for

FVS100

Download PDF

report

Chief FVS150 Installation guide

This manual is also suitable for

Chief FVS150 Installation guide

Related papers

Other documents