13 DRAWER ROLL CABINET
Assembly and Operating Instructions
Visit our website at: http://www.harborfreight.com
Read this material before using this product. Failure to do so can result in serious
injury. SAVE THIS MANUAL.
Copyright
©
2008 by Harbor Freight Tools
®
. All rights reserved. No portion of this manual or any artwork
contained herein may be reproduced in any shape or form without the express written consent of
Harbor Freight Tools. Diagrams within this manual may not be drawn proportionally. Due to continuing
improvements, actual product may differ slightly from the product described herein. Tools required
for assembly and service may not be included.
For technical questions or replacement parts, please call 1-800-444-3353.
Thank you for choosing a Harbor Freight Tools product! For future reference, please complete
the owner’s record below:
Model:_____________________ Purchase Date:_____________________
Save the receipt and these instructions. It is important that you read the entire instruction
sheet to become familiar with this product before you begin using it.
Technical Specifications: Maximum Weight Capacity: 2894 Lbs. Dead Weight (Evenly Distributed
Between the 13 Drawers). 2 Keys. This 13 Drawer Roll Cabinet is designed to be used side-by-
side with 7 Drawer End Cabinets (SKU 90321/91361/95404/98086) sold separately. The lip running
along the side of Cabinets 90321/91361/95404/98086 will mount on the side of this Cabinet.
Drawer Dimensions
Weight Capacity for each drawer: Drawer A(5) - 88 Lbs. 22”x15.8”x2.3”
Drawer B - 110 Lbs. 22”x15.7”x5.4”
Drawer C(5) - 88 Lbs. 11.9”x15.8”x2.3”
Drawer D - 110 Lbs. 11.9”x15.7”x5.4”
Drawer E(Top)- 121 Lbs. 36.7”x15.8”x3.9”
Weight Capacity for top panel: - 1673 Lbs.
Total 2894 Lbs.
Warning:
1. Read this instruction sheet before assembling and using the 13 Drawer Roll Cabinet.
2. Always wear ANSI approved safety goggles when working with tools and equipment.
3. Only use the Cabinet on a flat, level and solid surface that is capable of supporting the
weight of the Cabinet and its contents.
4. Do not exceed the 2894 Lbs. maximum weight capacity (dead weight) - evenly distributed
among the drawers.
Assembly: The Cabinet includes only 1 Handle. Assemble side handle using included
screws.
ALL DRAWERS MUST BE PUSHED IN FULLY BEFORE CABINET WILL LOCK.
ITEMS
90320
91363
95403
98084
Revised Manual 10e
Parts List
Note:
This parts list does not show
all parts, just the parts that
most likely will be required for
replacement. Some parts are
listed and shown for illustra-
tion purposes only and are
not available individually as
replacement parts.
PLEASE READ THE FOLLOWING CAREFULLY
THE MANUFACTURER AND/OR DISTRIBUTOR HAS PROVIDED THE PARTS DIAGRAM IN THIS MANUAL AS A REFERENCE
TOOL ONLY. NEITHER THE MANUFACTURER NOR DISTRIBUTOR MAKES ANY REPRESENTATION OR WARRANTY OF ANY KIND
TO THE BUYER THAT HE OR SHE IS QUALIFIED TO MAKE ANY REPAIRS TO THE PRODUCT OR THAT HE OR SHE IS QUALIFIED TO
REPLACE ANY PARTS OF THE PRODUCT. IN FACT, THE MANUFACTURER AND/OR DISTRIBUTOR EXPRESSLY STATES THAT ALL
REPAIRS AND PARTS REPLACEMENTS SHOULD BE UNDERTAKEN BY CERTIFIED AND LICENSED TECHNICIANS AND NOT BY THE
BUYER. THE BUYER ASSUMES ALL RISK AND LIABILITY ARISING OUT OF HIS OR HER REPAIRS TO THE ORIGINAL PRODUCT OR
REPLACEMENT PARTS THERETO, OR ARISING OUT OF HIS OR HER INSTALLATION OF REPLACEMENT PARTS THERETO.
LIMITED 90 DAY WARRANTY
Harbor Freight Tools Co. makes every effort to assure that its products meet high quality and durability stan-
dards, and warrants to the original purchaser that this product is free from defects in materials and workmanship for
the period of 90 days from the date of purchase. This warranty does not apply to damage due directly or indirectly, to
misuse, abuse, negligence or accidents, repairs or alterations outside our facilities, criminal activity, improper instal-
lation, normal wear and tear, or to lack of maintenance. We shall in no event be liable for death, injuries to persons or
property, or for incidental, contingent, special or consequential damages arising from the use of our product. Some
states do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation of exclu-
sion may not apply to you. THIS WARRANTY IS EXPRESSLY IN LIEU OF ALL OTHER WARRANTIES, EXPRESS
OR IMPLIED, INCLUDING THE WARRANTIES OF MERCHANTABILITY AND FITNESS.
To take advantage of this warranty, the product or part must be returned to us with transportation charges
prepaid. Proof of purchase date and an explanation of the complaint must accompany the merchandise. If our in-
spection verifies the defect, we will either repair or replace the product at our election or we may elect to refund the
purchase price if we cannot readily and quickly provide you with a replacement. We will return repaired products at
our expense, but if we determine there is no defect, or that the defect resulted from causes not within the scope of
our warranty, then you must bear the cost of returning the product.
This warranty gives you specific legal rights and you may also have other rights which vary from state to
state.
3491 Mission Oaks Blvd. • PO Box 6009 • Camarillo, CA 93011 • (800) 444-3353
-
1
-
2
Harbor Freight Tools 98084 User manual
- Type
- User manual
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
-
Harbor Freight Tools 18 in. 7 Drawer Glossy Red End Cabinet For Roller Tool Chest User manual
-
-
-
-
-
-
-
-
Chicago Electric 61705 Owner's manual
-
Other documents
-
Digitus DN-95404 Datasheet
-
U.S. General Item 64442 Owner's manual
-
-
-
-
-
-
-