Micca M1003Z User manual

M1003Z Digital Photo Frame

With 8GB Memory Card

Owner’s Manual

Got a Question or Need Help?

Email our technical support team at: support@miccatron.com for

personalized assistance with the setup and use of this product. Please visit

our product information website www.miccatron.com for the following:

- Firmware Updates

- User’s Manuals

- Troubleshooting Wizard

- Technical Support Request

When contacting technical support, be sure to include your order information,

product model, and serial number from the bottom of the player.

-

2014

Micca

This manual may not be reproduced in whole or in part without

permission for any purpose other than personal use.

1 Introduction

1.1 Preface

Thank you very much for purchasing this digital photo frame. We hope you will enjoy

using it to view your treasured photos. This photo frame has the following features:

1.1.1 Highlights

 10-Inch 1204x768 high resolution LCD screen

 Natural-view 4:3 screen ratio displays photos with minimal cropping

 Included 8GB SD memory card

 Slim profile with curved back case design for modern appearance

1.1.2 Features

 Supports JPG image/photo files

 Supports MP3 music files

 Supports AVI and MP4 video files using MPEG1/2/4 video codecs

 Slideshow with background music

 Compact IR remote control

 USB 2.0 host connector supports USB flash drives

 Flash media card reader supports SD/SDHC cards

 Automatic photo slideshow, music, or video playback

 Auto power on/off feature with flexible scheduling

 Adjustable slideshow sequence, speed, and transition effects

 Clock and calendar with slideshow

 Adjustable screen brightness, contrast, and saturation

 Multiple language support: English, French, Italian, German, Spanish

Note: All the information contained in this manual was correct at the time of publication.

However, as our engineers are always updating and improving the product, your

device’s software may have a slightly different appearance or modified functionality than

presented in this manual.

2 Precautions

2.1 Precautions and Maintenance

 This product is intended for residential indoor use only. It is not intended for outdoors

use, or use in harsh environments, or demanding commercial use.

 To avoid risk of fire or electric shock, do not expose the unit to moisture or

condensation.

 To avoid overheating, do not block the ventilation holes on the digital photo frame.

 Keep the digital photo frame away from direct sunlight.

 Turn off the player and disconnect from AC power if not used for a while.

 Do not disassemble the digital photo frame. There is a risk of electric shock and

there are no user-serviceable parts inside. Disassembling the digital photo frame will

void its warranty.

2.2 Cleaning the LCD Screen

 Treat the screen gently and carefully. The screen of the digital photo frame has a

glass component that can be damaged or broken when impacted.

 Use a soft, non-abrasive lint-free cloth such as microfiber camera lens cloth to gently

wipe the LCD screen if fingerprints or dust accumulate on the LCD screen. If

necessary, use a cleaning solution that’s safe for coated camera photo lens

cleaning. Spray the cleaning solution onto the cleaning cloth. NEVER SPRAY

CLEANING SOLUTION DIRECTLY ONTO THE LCD SCREEN.

WARNING:

Please power off the unit before inserting or removing a memory card or USB drive. Do

not put the unit near water or a high-moisture environment to prevent the risk of electric

shock.

3 Connections and Buttons

3.1 Buttons

1. Power On/Off

2. Return

3. Up/Previous

4. Play/Pause/OK

5. Right /Volume+

6. Left/Volume-

7. Down/Next

Note: The up and down buttons are named in accordance of their function when the

user is looking at the front of the photo frame. Thus, pressing the “Up” button will move

the cursor up and the “Down” button will move the cursor down.

3.2 Connections

1. SD/SDHC Card

Reader

2. Headphone Output

3. USB 2.0 Port

4. Mini USB Port

(Optional)

5. DC Power Input

Note: Only use the AC adapter that is provided with the digital photo frame. Using a

different AC adapter may damage the unit. The Mini USB port is optional and may not

be present.

3.3 Remote Control

To replace the battery in the remote,

place the remote control face down,

press down on the ridged area of the

battery cover and pull towards you to

remove the tray. Place one CR2025

lithium button-cell battery on the tray

with the positive “+” side facing you.

Reinsert the tray.

Key

Function

1

Power Turn the photo frame on or off

2

BMG Start a slideshow with background music (background music

must be enabled in the settings menu)

3

Mute Mute or unmute the sound output

4

Menu Return to the main menu

5

Return Go back to the previous step or screen

6

Up Move cursor up, or go to previous photo during slideshow

7

Left Move cursor left, or fast-forward during music or video playback

8

OK Play or pause photo slideshow, music, or video

9

Right Move cursor right, or rewind during music or video playback

10

Down Move cursor down, or go to next photo during slideshow

11

Setup Go to the setup menu

1

2

Play/Pause Play or pause photo slideshow, music, or video playback

13

Volume- Decrease the volume during music or video playback

1

4

Volume+ Increase the volume during music or video playback

1

5

Zoom Zoom in when viewing a photo (slideshow must be paused)

1

6

Previous Go to previous file during music or video playback

1

7

Next Go to next file during music or video playback

1

8

Rotate Rotate a photo 90 degrees (slideshow must be paused)

4 Getting Started

4.1 Initial Setup

Find a flat and stable surface to place the photo frame. Plug the AC adapter into a

standard 110V AC or 240V AC electrical outlet and connect it to the DC Power Input on

the photo frame. The photo frame should automatically turn on and display the main

menu.

 Carefully remove the protective film covering the LCD.

 Remove the plastic battery insulator from the battery compartment and make sure

the remote control has a battery inside.

Your digital photo frame is now ready for use.

4.2 Basic Usage

The photo frame is very easy to use. It is pre-configured from the factory with default

settings that are already optimized for most users. Simply copy your favorite photos

onto the included SD card using a computer. Insert the SD card into the card reader on

the photo frame, turn the photo frame on, and the photos will automatically begin

displaying.

Mac OS users, please see additional instructions in the troubleshooting section at the

end of this manual.

5 Operating Instructions

After turning on the photo frame, the main menu

will display after a few seconds. If there is a flash

memory card or USB flash drive inserted into the

photo frame, a slideshow will automatically begin

plain. To get back to the main menu, press the

“Menu” button on the remote control, or press and

hold the “Menu/Return” button on the back of the

photo frame.

The main menu contains icons for Photos, Music,

Videos, File Operations, Calendar, and Setup.

5.1 Flash Memory Cards and USB Flash Drives

The photo frame supports SD/SDHC flash memory cards and USB flash drives, both up

to 32GB in size. While the photo frame can handle high resolution photos directly from a

digital camera, it is strongly recommended to resize photos down to a lower resolution

of about one megapixel in size. This allows more photos to be stored on the storage

device and smaller files results in more responsive operation by the photo frame.

The photo frame comes with an 8GB SD memory card that can be used to hold photos,

music, or videos. The photo frame does not have

any internal storage.

5.2 Choosing Storage Device

When more than one storage device is detected

by the digital photo frame, it is necessary to

select which storage device to use. Once

selected, all operations are on the selected

storage device. To perform operations on another

storage device, it is necessary to select it first.

To select a storage device, press the “Menu/Return” button repeatedly until the storage

selection screen is shown. Highlight the desired storage device and press

“Play/Pause/Enter” to select it.

5.3 Viewing Photos

When a storage device loaded with photos is inserted, the digital photo frame will

automatically start displaying a photo slideshow when it is turned on. The user can also

manually start a slideshow through the “Photo” icon from the main menu.

Background music will also begin playing if music files are found. To change this

behavior, refer to detailed settings in Chapter 6.

When viewing photos, refer to Section 3.3 for remote control functions available. The

following operations are available using the buttons on the back of the photo frame:

Button

Descrip

tion

Play/Pause

Play or pause the photo slide show.

Left/

Volume

-

Decrease background music volume (only if music is playing)

Right/

Volume

+

Increase background music volume (only if music is playing)

Up

/Previous

Go to the previous photo.

Down

/Next

Go to the next photo.

Menu/Return

Stop the slide show and return to the photo thumbnail menu.

5.4 Playing Music

To begin playing music, select the “Music” icon

from the main menu. All supported music files

found on the storage device will be displayed in

one list. Only MP3 music files with an “mp3” file

extension are supported. Scroll to the desired

music file and press the “Play/Pause/Enter”

button to begin playing the music.

While playing music, refer to Section 3.3 for remote control functions available. The

following operations are available using the buttons on the back of the photo frame:

Button

Description

Play/Pause

Play or pause the music.

Left/

Volume

-

Turn down the playback volume.

Right/

Volume

+

Turn up the playback volume.

Up

/Previous

Go to the previous music file.

Down

/Next

Go to the next music file.

Menu/Return

Stop the playback and return to the main menu.

5.5 Playing Videos

To begin playing videos, select the “Video” icon from the main menu. All supported

video files found on the storage device will be displayed in one list. Scroll to the desired

video file and press the “Play/Pause/Enter” button to begin playing the video.

Only video files with an “mp4” or “avi” file extension are supported. If a video file does

not play, then it is likely not in a supported format. It is possible to convert such videos

into a compatible format by using freely available software tools such as Handbrake.

While playing videos, refer to Section 3.3 for remote control functions available. The

following operations are available using the buttons on the back of the photo frame:

Button

Description

Play/Pause

Play or pause the video.

Left/

Volume

-

Turn down the playback volume.

Right/

Volume

+

Turn up the playback volume.

Up

/Previous

Go to the previous music file.

Down

/Next

Go to the next music file.

Menu/Return

Stop the playback and return to the video selection menu.

5.6 File Browsing

The “File” icon from the main menu lets users

browse the contents of the selected storage

device by navigating its folder directory structure.

All compatible photo, music, and video file types

will be displayed while incompatible file types are

not displayed.

It is possible to delete files and folders while

browsing the folder directory structure. It is

strongly recommended that a computer be used to

delete files and folders from a storage drive instead since a computer is much faster

and more convenient. To delete a file or folder, highlight it using the cursor and press

the “Right” button to bring up the deletion menu. Press the “Play/Pause/Enter” button

once to initiate deletion, and once again to confirm.

5.7 Calendar

To view the calendar, select the “Calendar” icon

from the main menu. Be sure to properly set the

date and time in the settings menu so that the

information displayed is correct. The photo frame

will automatically begin playing a slideshow using

photos found on the selected storage device.

6 Detailed Settings

To access the setup menu of the photo frame,

turn it on and wait for the main menu to display.

Highlight the Setup icon and press “Enter”. The

Setup menu is divided up into five sections as

detailed below. Use the “Up” and “Down” buttons

to highlight a configuration section and press

“Play/Pause/Enter” to select it. Within a

configuration section, use the “Up” and “Down”

buttons to select a settings item, and then use the

“Left” and “Right” buttons to change the setting

value. Press the “Menu/Return” button to exit the settings menu when finished.

6.1 Photo Setup

Display Mode

Sets the behavior when selecting the “Photo” icon from the main menu.

Setting

Description

Slideshow

Begins displaying slideshow with all photos found on the currently

selected storage device.

Thumbnail

Displays thumbnail view of photo files and folders.

Background Music

Enable or disable background music when viewing photo slideshows.

Available Values: On, Off

Display Ratio

Changes the way photos are displayed when they do not perfectly fit the screen of the

photo frame.

Setting

Description

Auto Fit

Black bars will be added to the top or bottom of photos that are too

narrow or too wide relative to the screen.

Optimal

Photos are cropped on the top/bottom or sides to fit the screen.

Full

The photo will be stretched or squeezed to fit the full screen.

Slide Speed

Sets the time interval between each photo in a slideshow.

Available Values: 3/5/15/30 Seconds, 1/5/15 Minutes

Slideshow Repeat

Configures whether the slide show repeats continuously, or stop after playing once.

Available Values: On, Off

Slideshow Effect

Sets the transition effect as one photo switches to the next in a slideshow.

Available Values: Random (default), and a selection of various transition effects.

Slideshow Mode

Changes the number of photos displayed at the same time during a slideshow. The

higher the setting, the more photos will be shown at the same time.

Available Values: Single Window, Two Windows, Triple Windows, Four Windows

Slideshow Sequence

Changes the photo playback sequence when displaying slideshows.

Setting

Description

Sequential

Photos will be displayed in their normal sequence alpha-

numerically based on file name.

Random

Photos will be displayed in random sequence.

6.2 Calendar Setup

Date

Set the current date in the format of “[Day]-[Month]-[Year]”. Use the “Up” and “Down”

buttons to switch between fields, and the “Left”, and “Right” buttons to change date field

values.

Available Settings: Day, Month, Year

Time Format

Change to display the time in either 12-hour or 24-hour time format.

Available Values: 12 Hours, 24 Hours

Time

Set the current time in the format of “[Hour]:[Minute]”. Use the “Up” and “Down” buttons

to switch between fields, and the “Left”, and “Right” buttons to change time field values.

Available Settings: Minute, Hour

Alarm Status

Enable or disable the alarm function

Available Settings: On, Off

Alarm Time

Set the alarm time in the format of “[Hour]:[Minute]”. Use the “Up” and “Down” buttons to

switch between fields, and the “Left”, and “Right” buttons to change time field values.

Available Settings: Minute, Hour

Alarm Tone

Configures the alarm sound.

Available Settings: Alarm 1, Alarm 2, Alarm 3

Alarm Frequency

Configures the days on which the alarm will be enabled.

Setting

Description

Once

Alarm is active only once.

Daily

Alarm is active every day.

Mon. to Fri.

Alarm is active Monday through Friday

Sat. to Sun.

Alarm is active on Saturday and Sunday

6.3 Video Setup

Display Mode

Configures the way videos are displayed when they do not perfectly fit the screen of the

photo frame.

Setting

Description

Full

The video will be stretched or squeezed to fit the full screen.

Original Size

The video will be played in the original size and display ratio. It will

not fill the screen if it has a lower resolution than the LCD screen.

Play Mode

Changes the video playback sequence.

Setting

Description

Circular

Videos will be looped continuously in their normal sequence alpha-

numerically based on file name.

Random

Videos will be played continuously in random sequence.

Single

A single video will play once and then stop.

6.4 Music Setup

Play Mode

Changes the music playback sequence.

Setting

Description

Circular

Music files will be looped continuously in their normal sequence

alpha-numerically based on file name.

Random

Music files will be played continuously in random sequence.

Single

A single music file will play once and then stop.

Single Repeat

A single music file will be looped continuously.

Show Spectrum

Configures whether the simulated spectrum display is enabled during music playback.

Available Values: On, Off

6.5 System Setup

Language

Changes the operating language of the photo frame.

Available Values: English, French, Italian, German, Spanish

Start Up Mode

Sets the operation mode of the photo frame when it is turned on.

Setting

Description

Photo

Play a photo slideshow

Music

Play music files.

Video

Play video files.

Calendar

Display the calendar.

Main Menu

Display the main menu.

Brightness, Contrast, Saturation, Hue

Changes the display parameters of the LCD screen. The default values are optimal for

most conditions.

Auto On

Enable or disable the automatic power on functionality of the photo frame.

Available Settings: Enable, Disable

Auto On Time

Set the auto power on time in the format of “[Hour]:[Minute]”. Use the “Up” and “Down”

buttons to switch between fields, and the “Left”, and “Right” buttons to change time field

values.

Available Settings: Minute, Hour

Auto Off

Enable or disable the automatic power Off functionality of the photo frame.

Available Settings: Enable, Disable

Auto Off Time

Set the auto power off time in the format of “[Hour]:[Minute]”. Use the “Up” and “Down”

buttons to switch between fields, and the “Left”, and “Right” buttons to change time field

values.

Available Settings: Minute, Hour

Auto-Power Frequency

Configures the days on which the auto power on/off feature will be enabled.

Setting

Description

Once

Feature is active only once.

Daily

Feature is active every day.

Mon. to Fri.

Feature is active Monday through Friday

Sat. to Sun.

Feature is active on Saturday and Sunday

Volume

Sets the speaker volume during music and video playback.

Reset Settings

Reset all settings back to factory defaults.

Version

Display the current firmware version information

System Upgrade

Upgrade the photo frame firmware. When a new version of the firmware is available,

detailed instructions for its installation will be provided along with the update.

7 Troubleshooting Guide

Cannot Read A SD/SDHC Card or USB Drive

The photo frame supports SD/SDHC and USB flash drives up to 32GB in size, using

FAT32 file system. Check to be sure that the SD card or USB drive meets these

requirements. It may be necessary to reformat the SD card or USB drive. Be sure to

copy photos off the drive before doing so as formatting the drive permanently erases the

contents. Select FAT32 as the file system when reformatting the drive.

Apple Mac Computer Users

The Mac OS operating system creates numerous hidden folders and thumbnail files that

are proprietary to the Mac OS and are not well supported by non-Apple products. Using

Mac OS to copy files onto a SD card or USB drive for use with the photo frame will

sometimes lead to strange behavior. There are utilities such as Blue Harvest available

for the Mac OS to prevent these hidden folders and thumbnail files. Mac users are

strongly recommended to use such a utility.

Cannot Play a File

Make sure that the file is compatible with the photo frame. The photo frame supports

JPG photo files, MP3 music files up to 320kbps, and video files with AVI or MP4

extension encoded with MPEG1/2/4 for video and MP3 for audio. If a video file does not

play, then it is likely not in a supported format. It is possible to convert such videos into a

compatible format by using freely available software tools such as Handbrake.

Not Showing All Photos or Showing Same Photos Repeatedly

First, try reformatting the SD card or USB drive that is used to hold the photos. Be sure

to copy photos off the drive before doing so as formatting the drive permanently erases

the contents. Select FAT32 as the file system when reformatting the drive. Copy photos

back onto the SD card or USB drive after formatting.

If problem persists after reformatting the drive, there are possibly one or more corrupted

or unsupported progressive-format files in the collection of photos. Because it would be

time consuming and difficult to isolate the problematic image(s), it is recommended to

reprocess all images in batch mode using a free utility such as Irfanview. Doing so

typically fixes issues caused by corrupted image files. Irfanview comes with detailed

instructions on how to reprocess JPG files in batch mode.

8 Specifications

Adapter: Input 100-240V 50/60Hz AC, Output 5V/1.5A DC

Card Reader: SD/SDHC Up to 32GB

USB: USB flash drives up to 32GB

Photo Format: JPG

Music Format: MP3 up to 320kbps

Video Format: AVI MP4 Files, MPEG1/2/4 for video and MP3 for audio

LCD Screen:

Size

10-Inch TFT

Resolution

1024x728

Aspect Ratio

4:3

Brightness

300cd/m2

Contrast

300:1

Response Time

20ms

Information in this manual is believed to be accurate and reliable but Micca assumes no responsibility for its use nor

for any infringement of patents or other rights of third parties which may result from the use of this manual or the

product. Micca reserves the right to change product specifications at any time without notice.

Micca, M1003, and the Micca logo are trademarks of Micca. Other trademarks referenced in this manual are the

properties of their respective owners.

Micca M1003Z User manual

Micca M1003Z User manual

Related papers

Other documents