ActionTec ECB2500C Installation guide

Brand: ActionTec

Model: ECB2500C

Category: Networking cards

Type: Installation guide

This manual is also suitable for

ECB2500c MoCA Network Adapter

ActionTec ECB2500c MoCA Network Adapter enables you to use your home's existing coaxial wiring to create a high-speed wired Ethernet network without drilling holes or running new wires. It's perfect for connecting devices like smart TVs, game consoles, and computers to your home network, extending your network's range to hard-to-reach areas, or creating a dedicated network for streaming media or gaming. With speeds of up to 1 Gbps, you'll enjoy seamless streaming, lag-free gaming, and fast file transfers.

ActionTec ECB2500c MoCA Network Adapter enables you to use your home's existing coaxial wiring to create a high-speed wired Ethernet network without drilling holes or running new wires. It's perfect for connecting devices like smart TVs, game consoles, and computers to your home network, extending your network's range to hard-to-reach areas, or creating a dedicated network for streaming media or gaming. With speeds of up to 1 Gbps, you'll enjoy seamless streaming, lag-free gaming, and fast file transfers.

Creative Solutions for the Digital Life

™

Installation Guide

MoCA Network Adapter Installation Guide

Step

5 Plug one end of the power adapter into

the Power port on the back of the MoCA Network

Adapter. Then plug the other end into an electrical

wall outlet.

Step

6 If necessary, get a second MoCA Network

Adapter. Plug one end of the 2nd Ethernet Cable

into the Ethernet Network port on the side of the

2nd MoCA Network Adapter.

Step

7 Plug the other end of the Ethernet Cable into the Ethernet Port on the

device you want to connect to the Internet.

Step

8 Locate the coaxial cable connected to the wall outlet in the room with

the device that you want to connect to the Internet. Connect the coaxial cable to

the COAX IN port on the back of the MoCA Network Adapter.

Step

9 If necessary, locate the coaxial cable

connected to your Set Top Box or Television. Make

sure this cable is connected from your TV/Set Top Box

to the TV/STB Out port on the MoCA Network

Adapter.

Step

10 Plug one end of the 2nd power adapter

into the Power port on the back of the MoCA

Network Adapter. Then plug the other end into an

electrical wall outlet. Please make sure that both

Coax and Ethernet lights turn solid green on both adapters.

Congratulations! You have successfully connected your device to the Internet.

www.actiontec.com

Stock# 0530-0596-001 QS1018/0209

MoCA Network Adapter Model#ECB2500c

This Quick Start Guide will walk you through the easy steps to use your existing

coaxial wiring as an Ethernet network connection.

Step

1 Get one MoCA Network Adapter.

Step

2 Find your Broadband Modem/Router.

Plug one end of the Ethernet Cable into the

Ethernet Network port on the side of the MoCA

Network Adapter.

Step

3 Plug the other end of the Ethernet Cable

into an OPEN Ethernet Port on your Modem/ Router.

Step

4 Locate the coaxial cable connected to the wall

outlet in the room with the Broadband Modem/Router.

Connect the coaxial cable to the COAX IN port on the side

of the unit.

continued on the back

4

www.actiontec.com

1

ActionTec ECB2500C Installation guide

Brand: ActionTec

Model: ECB2500C

Category: Networking cards

Type: Installation guide

This manual is also suitable for

ECB2500c MoCA Network Adapter

ActionTec ECB2500c MoCA Network Adapter enables you to use your home's existing coaxial wiring to create a high-speed wired Ethernet network without drilling holes or running new wires. It's perfect for connecting devices like smart TVs, game consoles, and computers to your home network, extending your network's range to hard-to-reach areas, or creating a dedicated network for streaming media or gaming. With speeds of up to 1 Gbps, you'll enjoy seamless streaming, lag-free gaming, and fast file transfers.

Download PDF

Related papers

Other documents