Medium Hollywood Mirror
Always read the instructions carefully before using.
For indoor use only.
Made in China
Safety Instructions
Do not immerse the appliance in water, Clean the appliance
surface with a dry cloth
If product becomes damaged, dispose of as electrical waste
according to local, state and federal requirements. Repairs
should not be attempted.
Do not place or store the appliance for long periods of time in a
hot or humid environment
The light source of this luminaire is not replaceable; when the
light source reaches its end of life the whole luminaire shall be
replaced
Special Feature
What's in the box
Product Specification
How to assemble the mirror
This mirror uses Lifetime Energy Saving LED bulbs.
Replacement bulbs are not required
Brightness adjusting switch
Press to select warm, cool or natural
Input: 220-240VAC, 50/60Hz
Output: 12VDC, 1000mA, 12W
Cool, Natural: 6.35W
Warm: 7.05W
Mirror LED Light Wattage Type of Adaptor
Adaptor
Screw Driver Instruction manualScrew
Base
7
How to use the mirror
Plug adaptor into mirror. touch power button on
mirror to illuminate lights.
button to switch between warm,
cool and natural.
Touch the power switch again, the
lights will be
hold your nger on the power
switch for 1-3 seconds to
adjust the brightness of the lights.
/
