Platinum LAHO1700 User manual

Brand: Platinum

Model: LAHO1700

Type: User manual



USER GUIDE

SDBS20 SDBS40 WJBS40

DBS20-01 SDBS40-01 WJBS40-01 



 The picture is only for reference, please make the object as the standard.

IRRIGLAD Hose Reel Water Carts are a portable irrigation option for irrigating lawns, crops,

sports fields, parks …etc

 The way to go for getting rid of wastewater

 Easy to use

 Offer adjustable speed control to regulate run time & application depth

 Feature automatic retraction and sprinkler shut down

VERSION A1

SDBS20- Manual Speed Adjustment Travelling Water Sprinkler

SDBS40- Manual Speed Adjustment Travelling Water Sprinkler

WJBS40- Variable Speed control Travelling Water Sprinkler

SDBS20-01 Manual Speed Adjustment Travelling Water Sprinkler (with turning function

device)

SDBS40-01 Manual Speed Adjustment Travelling Water Sprinkler (with turning function

device)

WJBS40-01 Variable Speed control Travelling Water Sprinkler (with turning function

device)

User Guide

- SDBS20 / SDBS40 / WJBS40/ SDBS20-01 / SDBS40-01 / WJBS40-01

（A）Product application:

Automatic irrigation for irrigating lawns, crops, sports fields, parks …etc

（B）Main Components:

① - The water turbine

② - Gear box

③ - The stationary base unit

④ - Hose retraction guide

⑤ - Travelling sprinkler

（C）Assemble Outline - Travelling Water Sprinkler:

1-1

（D）Assembly Instructions:

*SDBS20 / SDBS40 / WJBS40/ SDBS20-01 / SDBS40-01 / WJBS40-01

List (1):

List (2):

No. Parts Name Pictures Quantity

9 Guide rod 2

10 Guide tube 2

11 Tool

12 Spike

Remarks: 9, 10, 12 of list (2) are used for the turning function, as alternative. 11 of list (2)

are common tools.

- Step 1: The thread shaft is already installed, and just rotate the wheel to finish it. The

No. Parts Name Pictures Quantity No. Parts Name Pictures Quantity

1 Back wheel

2 5 Left Foot Anchor

2 Handle

1 6

Front wheel

Three-way

valve with

pressure

gauge

1 7 G3/4"sprinkler head

Right Foot

Anchor

1 8

Watering cart

1. Components list:

2. Assemble Process：

1 Left back wheel

2 Handle

3 Three-way valve with hydrometer

4 Right Foot Anchor

5 Left Foot Anchor

The thread shaft

installation of the left thread shaft and the left wheel is the same as the right one. Tighten the

screws of the handle to assemble it as the following: (1-2)

1-2

- Step 2: Rotate the three-way valve with pressure gauge into the thread of water turbine.

(1-3)

1-3

- Step 3: Install the left and right foot Anchor on the stationary base unit. (1-4)

1-4

6 Right Front wheel

6 Left Front wheel

7 G3/4"sprinkler

head

- Step 4: Install the sprinkler head and two front wheels on the travelling sprinkler cart. (1-5)

1-5

Remarks:

(1) The turning function is as alternative and the guiding device is assembled as the

following: (1-6)

1-6

(2) When using the turning function, insert the spike into the required position. The total

9 Guide rod and 10 Guide tube

Assemble

the wheel

Connect the guide rod

and the guide tube

Tighten the

screws with

the tool

Thread joint

metal parts should be in the earth. When the guiding device meets the top of the spike, the

travelling position will be adjusted automatically. (1-7)

1-7

- Step 5: Connect the hose of the stationary Base Unit to the travelling sprinkler cart. (1-8)

1-8

（E）Operation instruction

* Part A - apply for SDBS20 / SDBS40/ SDBS20 -01/ SDBS40-01; Part B - apply for

WJBS40/ WJBS40-01

Part A:

Step 1: The fully Assembled Unit is pulled onto the lawn, and the legs are pushed into the

ground to prevent the Stationary Base Unit from moving. Connect the Stationary unit to the

water supply and close the main water valve.

This part should be in the earth.

Step 2: Pull out the clutch handle, the hose reel is separated and the hose reel can be rotated.

(1-9)

1-9

Step 3: Button up the rotator clockwise, to make it off the transmission. (1-10)

1-10

Step 4: Pull the watering cart to the required irrigation position, and press the the open/close

lever to the fully open position. (1-11)

1-11

Step 5: Button the rotator into the groove anticlockwise. (1-12)

1-12

Pull out

Open

Main water valve

Step 6: Push in the clutch handle and engage the clutch handle. Shift: inside is slow, outside

is fast. (1-13)

1-13

Step 7: Open the main water valve and adjust the water pressure. The sprinkler sprays, and

the water flow will drive the travelling water sprinkler to recovery the hose. The higher the

water pressure, the faster the recovery speed. When the hose fully retracted, it is

automatically shut off.

Remarks: the retractable speed will be adjusted during the watering by Hose-recovery

Speed rotator.

Part B:

Step 1: The fully Assembled Unit is pulled onto the lawn, and the legs are pushed into the

ground to prevent the Stationary Base Unit from moving. Connect the Stationary unit to the

Slow

Fast

Push in

Main water valve

water supply and close the main water valve.

Step 2: Pull out the clutch handle, the hose reel is separated and the hose reel can be rotated.

(1-14)

1-14

Step 3: Button up the rotator clockwise, to make it off the transmission. (1-15)

1-8

1-15

Step 4: Pull the travelling Sprinkler to the required irrigation position,

and press the open/close lever to the fully open position.(1-16)

1-16

Step 5: Button the rotator into the groove anticlockwise. (1-17)

1-17

Open

Pull out

Main water valve

Step 6: Push in the clutch handle and engage the clutch handle. (1-18)

1-18

Step 7: Open the main water valve and adjust the water pressure. The sprinkler sprays, and

the water flow will drive the travelling water sprinkler to recovery the hose. The higher the

water pressure, the faster the recovery speed. When the hose fully retracted, it is

automatically shut off. (1-19)

1-19

Remarks: the retractable speed will be adjusted during the watering by Hose-recovery

Speed rotator.

(F) Warranty：

- The water cart without the water hose: 2 years life time guarantee

-Water hose used on the water cart: 1year life time guarantee

Push in

Hose-recovery Speed rotator

Main water

valve

Except following situation:

1 The product was not normal use.

2 Unauthorized misuse, abuse and change.

3 Product of the normal wear and tear.

4 Damaged by force majeure such as earthquake, floods lightning strike, transport accident

and so on.

(G) Special Tips：

1 The water pressure should not exceed the maximum allowable value.

45psi

2 Electric shock hazard, do not spray water on or near electrical connections, products or into

outlets. For watering use with outdoor home water faucet only. Not for indoor or appliance

use. Use only with pressure 100 PSI max. Do not use with water exceeding 100℉(38℃).

Detach, (if it has flow control, turn it to on position) and drain before freezing weather. Do

not leave product pressurized while unattended.

3 This product can expose you to chemicals including lead, which is known to the State of

California to cause cancer and birth defects or other reproductive harm. Wash hands after

handling. For more information go to www.P65Warnings.ca.gov

45psi

Platinum LAHO1700 User manual

Platinum LAHO1700 User manual

Platinum LAHO1700 User manual

Other documents