Quick start manual
STUDIO M
MIDIPLUS
1
Production introduction
Thank you to purchase MIDIPLUS USB audio STUDIO M. STUDIO M is an input two output audio interface with
high quality Mic and 24 bit/192kHz high precision sampling. It supports PC USB power,48V phantom power supply
and the USB2.0 (support 3.0) interface transmission speed is satisfied. Studio M has fashion appearance, small
and exquisite, support MAC and WINDOW system.
Package contents
STUDIO M audio
USB cable
Quick start manual
Information card
Adaptor
Production description
1.Input (MIC/Line/Hi-z) interfaces
2.Input gain control knob
3.Switch (Mic/Instrument) button
4.48V phantom power ON/OFF
5.Headphone volume control button
6.Output volume control button
2
7.Headphone interface
8.Output interface(Left/Right)
9.Extensible device interface
10.USB interface
Connect diagram
3
Driver install
Support Windows 7 or above version:
1.Connect STUDIO audio interface to the computer.
2.The system will detect the new USB driver and install automatically.
3.Go to the website www.midiplus.com to download STUDIO driver.
4.Install the driver according to the prompt.
5.After finish the install, the device can be used.
MAC system
Connect the STUDIO audio interface to the computer and start to use it.
/