Headsets Y01 User manual

Brand: Headsets

Model: Y01

Type: User manual

Headsets Y01: True wireless stereo earbuds offering an immersive audio experience with up to 3.5 hours of talk or music time on a single charge. Effortlessly pair with your devices via Bluetooth and enjoy crystal-clear calls with the built-in microphone. Activate Siri with a triple-tap on either earbud for voice control convenience. Listen to your favorite tunes and navigate your playlist with simple touch controls.

Creative Zhilian (Shenzhen) Technology Co., Ltd.

Product Name : TWS Bluetooth Headset

Product Model : Y01

Release date :2022.4.5

PRODUCT FEATURES

1.Radio Frequency: 2.402GHz-2.480GHz

2.Communication distance (open space without obstacles) ＞10 meters

3.Talking hours / music hours Single full charge 3.5 hours or more

4.Battery cycle life Charge/discharge cycle >300 times

5.Charging input standard TypeC, DCV5V, 500mA-1000mA

Function Operation Instructions

CAUTONG

Do not attempt to modify this item in any way

Touch

button

function

operation

Basic

Functions

Operation steps and related instructions

Start up

Open the top cover of the charging compartment to

turn on automatically

Shutdown

Drop the headset into the charging compartment.

Cover automatically turns off

Auto

shutdown

When Bluetooth is not connected, it will turn off

automatically after more than 3 minutes without

any operation.

Pairing Mode

Simultaneous power on left and right ear about 2

seconds automatically into the TWS pairing state

Answering

the phone

Double click on either side of the R/L headset

Refuse to

answer

In the call status, long touch any side of the headset for 2

seconds

Hang up the

phone

Double-click the function key during a call

Pause/play

music

Double click the left/right headphone power pass button

Up and Down

Curve

Long press the R side of the headset to play the next

song, long press the L side of the headset to play the

previous song

SIRI

In the standby state three touches either side of the

headset open, and then three touches either side of the

headset off

Product pictures

This device complies with part 15 of the FCC Rules. Operation is subject to the

following two conditions: (1) This device may not cause harmful interference, and (2)

this device must accept any interference received, including interference that may cause

undesired operation.

Any Changes or modifications not expressly approved by the party responsible for

compliance could void the user's authority to operate the equipment.

Note: This equipment has been tested and found to comply with the limits for a Class B

digital device, pursuant to part 15 of the FCC Rules. These limits are designed to

provide reasonable protection against harmful interference in a residential installation.

This equipment generates uses and can radiate radio frequency energy and, if not

installed and used in accordance with the instructions, may cause harmful interference

to radio communications. However, there is no guarantee that interference will not

occur in a particular installation. If this equipment does cause harmful interference to

radio or television reception, which can be determined by turning the equipment off and

on, the user is encouraged to try to correct the interference by one or more of the

following measures:

-Reorient or relocate the receiving antenna.

-Increase the separation between the equipment and receiver.

-Connect the equipment into an outlet on a circuit different from that to which the

receiver is connected.

-Consult the dealer or an experienced radio/TV technician for help.

Headsets Y01 User manual

Headsets Y01 User manual

Other documents