Playnation Horizon Clubhouse Treehouse Assembly Manual

  • Hello! I'm a chat assistant and I've reviewed the user manual for PlayNation playhouses, specifically models 1500CWCF, 1500CW, 1500CWF, 1500CWC, 1500CWCR and 1500CTC. This manual provides detailed assembly instructions, covering everything from installing the clubhouse walls to mounting the tube slide and safety boards. It also focuses on safety and maintenance for your playhouse. I'm here to answer any questions you might have about this document or the products described in it.
  • What should be done with the telescope typically on the front of the set?
    What should be done with the Roof Peak Support Triangle?
    What should be done if the Flag Kits are normally at the front corner posts?
    What should I do if I'm adding the Treehouse Add On Kit to the playset that is already built?
Copyright © 2018 PlayNation Play Systems
All Rights Reserved
190 Etowah Industrial Court
Canton, GA 30114
www.playnation.com
Laguna Clubhouse Treehouse
Model: 1500CWCF
[BOXES: 1501, 1503N, 1512,
1530, 1518, 1525, Extreme Tube
Slide Box and Slide Box]
Amber Post Option
BOXES: 1520-2bx, 1522
Timber Shield Post Option
BOXES: W-1, 120
*52-2055-W*
52-2055-W
***IMPORTANT NOTICE FOR TREEHOUSE KIT PLAYSETS***
Read all instructions thoroughly before beginning construction, this is very important. The
“Treehouse Add On Kit” (1525) box will require you to deviate slightly from the standard kit
instructions.
Typical deviations include:
1) The Telescope that is usually on the front of the set on the Front face board (arched board)
must be moved to another location on the set. Additional instructions to mount the Telescope to
a 2 x 4 or a 4 x 4 are included in the play set Appendix or with the “Treehouse Add On Kit”
manual. Mount the Telescope along the top of any of the railings that do not interfere with any
areas that are activity openings.
2) The Roof Peak Support Triangle will need to be removed from the inside of the Roof Supports
located on the front of the play set. The Plastic Sunburst should be left off the front of the play
set. The “Treehouse Add On Kit” will be added to the front of the play set.
3) Flag Kits which normally reside on the front of the front corner posts at the top should be
relocated to the front slats on the “Treehouse Add On Kit”
Wood/Accessory and Hardware Lists:
These lists for the “Treehouse Add On Kit” are in the Appendix at the end of your play set
instruction manual or they are included with this sheet.
Steps to complete the “Treehouse Add On Kit”:
The instruction steps for the “Treehouse Add On Kit” are in the Appendix at the end of your play
set instruction manual or they are included with this sheet.
If you are adding the “Treehouse Add On Kit” to a playset that is already built:
It will be necessary to remove the Flags and Plastic Sunburst from the front side of your playset
wood roof. Then remove the 5/4 x 10” Roof Peak Support triangle from the inside of the front Roof
Supports. Keep these pieces and hardware since most will be reused during the construction
process.
Fill in the holes in the corner posts from the Flags with clear silicone (not included). If you wish to
fill the holes with a fastener then use #8 x 1” countersunk head screws with silicone in each hole.
You will need to purchase these screws at your local home center if you choose this option.
Fill any small holes in the Roof Supports leftover from removing the Plastic Sunburst with wood
filler. Use a stainable wood filler suitable for outdoor use. Then stain the wood filled spots with a
suitable matching color of stain.
Please inspect and inventory all parts immediately upon accepting delivery. Use the
inventory pages in the manual to make sure you have received all necessary parts.
The quickest method to get any parts that are missing or damaged is use our “Quick
Response Center” located at:
www.playnation.com/support
DO NOT RETURN THIS PRODUCT TO THE RETAILER OR CONTACT THE RETAILER DIRECTLY.
THE RETAILER DOES NOT STOCK COMPONENTS.
PLEASE RETAIN ALL INSTRUCTIONS FOR FUTURE REFERENCE. KEEP THEM IN A SAFE
PLACE WHERE YOU CAN REFER TO THEM AS NEEDED. CHECK FOR REVISED INSTRUC-
TIONS AT:
http://www.playnation.com/manuals.html
PLAYNATION WARRANTY 2018
MANUFACTURER'S LIMITED LIFETIME WARRANTY
PlayNation Play Systems warrants its Lifetime™ series of swing sets to be free from defects in
workmanship and materials, under normal use and conditions, for the lifetime of the product for above
ground structural wood components and for two years for all other components (e.g., swings, hardware,
plastics, tarps, rope ladder, etc.) except PlayNation's Super Scoop Slides™ and Super Tube Spiral Slides™.
PlayNation warrants its Super Scoop Slides™ and Super Tube Spiral Slides™ to be free from defects in
workmanship and materials, under normal use and conditions, for the lifetime of the product.
PlayNation warrants its Regal™, Imperial™, and Empire series swing sets to be free from defects in
workmanship and materials, under normal use and conditions, for a period of 15 years for above ground
structural wood components and for two years for all other components (e.g., swings, hardware,
plastics, tarps, rope ladder, etc.).
PlayNation warrants all remaining products, including but not limited to its Free Standing Swing Set, Free
Standing Tire Swing, See-Saw, Children's Picnic Table with Umbrella, Play-Zee-Bo™ and spring riders to
be free from defects in workmanship and materials, under normal use and conditions, for a period of 1
year. All accessories purchased separate from those included with one of our swing set packages have a
one year limited warranty.
Cosmetic imperfections and natural tendencies of wood such as peeling, splintering, warping,
seasonal checking or cracking, knots or knot holes, etc. are normal characteristics of all outdoor
wooden play equipment and are not covered by this warranty. Checks or cracks in wood components
that do not affect the intended function of the part, piece or overall swing set are not covered under
this warranty.
Wood rot or decay that develops because the product was installed in an area with poor drainage is not
covered under this warranty. Lumber that has been damaged by wood boring bees, or conditions that
develop as a result of faulty or improper installation of the product, are not covered by this warranty.
Fading of stain, discoloration or mold on any wood part or accessory is not covered by this warranty.
Cracks in plastic components, surface rust on hardware and chips on powder coated materials are not
considered defects in material as long as they do not affect the functionality or structural integrity of the
part or component.
It is the owner's responsibility to maintain the swing set. This includes but is not limited to staining and
sealing the lumber as needed and regular inspection to be sure all hardware is tight. Instructions for
proper maintenance can be found on PlayNation's website. Imperfections or conditions that develop
because of a failure to properly maintain the swing set are not covered by this warranty.
PLAYNATION WARRANTY 2018
PlayNation will, at its discretion, replace any above ground part within the stated warranty period that is
defective in workmanship or materials. This decision is subject to verification of the defect, which, at
PlayNation's discretion, may be accomplished by submitting photographs or by delivery of the defective
part to PlayNation. PlayNation Play Systems • 190 Etowah Industrial Ct. • Canton, GA 30114 •
770-704-9300 Monday to Friday 9AM-5PM EST. Any warranty claim must include proof of purchase,
including the date of purchase. In addition, within the first 30 days from the date of purchase,
PlayNation will replace any parts discovered to be missing from or damaged in the original packaging.
This warranty is valid only if the product is used for the purpose for which it was designed and installed
at a residential, single-family dwelling. This warranty is void if the product is used in a commercial,
institutional or multi-family setting. This warranty does not cover normal wear and tear or (a) products
that have been damaged by acts of God and/or nature, negligence, misuse or accident; (b) products
that have been modified or repaired by unauthorized persons; (c) the cost of labor; or (d) the cost of
shipping any replacement product or part.
PLAYNATION DISCLAIMS ALL OTHER REPRESENTATIONS AND WARRANTIES OF ANY KIND, EXPRESSED,
IMPLIED, STATUTORY OR OTHERWISE, INCLUDING THE IMPLIED WARRANTIES OF MERCHANTABILITY
AND FITNESS FOR A PARTICULAR PURPOSE. PLAYNATION WILL NOT BE LIABLE FOR ANY INCIDENTAL OR
CONSEQUENTIAL DAMAGES. This warranty is non-transferable and does not extend to the owners of the
product subsequent to the original purchaser. Some states do not allow limitations on implied
warranties or exclusion of incidental or consequential damages, so these restrictions may not be
applicable to you. This warranty gives you specific legal rights. You may also have other rights which vary
from state to state.
IMPORTANT SAFETY GUIDELINES
This product is recommended for use by children ages 3-11. This product is intended for residential
use only and not intended for use in any public setting. A safety surface such as mulch or recycled
tire should be used under the play set to prevent injury from falls. Also a 6 foot safety zone should be
used around the entire play set.
As with any home project, good judgment and respect for power tools will greatly reduce the risk
of injury. PlayNation recommends you follow all tool manufacturers’ safety guidelines. Always wear
eye protection and safety gloves to prevent injury. In several phases of construction two people may
be required for lifting and securing of lumber. While the play set is being constructed, please keep
children off the equipment until the project is complete. Bolts and screw heads should be checked
regularly for tightness. The ground ladder, rope ladder, slide, swings and other areas where children
spend a majority of their playtime should be checked more frequently.
PlayNation shall not be liable for incidental, indirect or consequential damages or injuries that result
from the building and/or playing on our play sets. Adult supervision is recommended anytime a play
set is being used.
WEIGHT LIMITS FOR PLAYNATION PLAYSETS
• FORT PLATFORMS: 800 LBS. TOTAL WEIGHT
• SWING BELT: 225 LBS.
• TANDEM SWINGS: 70 LBS. PER CHILD. UP TO 140 LBS TOTAL WEIGHT.
• TRAPEZE: 125 LBS.
• FULL BUCKET SWING/ HALF BUCKET SWING: 50 LBS.
• HEAVY DUTY TODDLER BUCKET SWING: 85 LBS.
• INFANT SWING: 35 LBS.
• TIRE SWING: 125 LBS. TOTAL WEIGHT
• ROPE LADDER: 75 LBS.
• ROCK WALL: 150 LBS.
• CLIMBING RAMP: 150 LBS.
• MONKEY BARS: 175 LBS.
ALL SLIDES: 150 LBS.
PlayNation recommends that the weight limits for all components must not be exceeded. Failure to
adhere to these and other safety guidelines could result in damage to the play set and injury to the
users.
THIS PAGE INTENTIONALLY LEFT BLANK
product registration
PlayNation manufactures the
nest quality products that
are designed for outstanding
strength and durability. We back
our products with an unparalleled
warranty. In the unlikely event
that you will need to contact us
about covered repairs, we must
have a valid Product Registration
on le.
3 Easy Ways To REgisTER
option 1 Complete the online registration form at:
http://www.playnation.com/register
option 2 Fax this completed form to:
(678) 880-3300
option 3
Mail this completed form to:
PlayNation Playsets
190 Etowah Industrial Court
Canton, GA 30114
Name: _______________________________________________________ Email: ______________________________________
Address: __________________________________________________________________________________________________
Comments: ________________________________________________________________________________________________
____________________________________________________________________________________________________________
____________________________________________________________________________________________________________
____________________________________________________________________________________________________________
Would you recommend this product to friends & family?
Please select
your age
How would
you rate the
quality of this
product?
18-30
2-3
41-50
6-7
Yes
 Excellent
 Above Average
 Average
 Below Average
Poor
No
31-40
4-5
51+
8+
How old are
your children?
Where did you buy this product?
Your registration information:
Date of Purchase Store Store City Store State
Street City State Zip
May we add you to our mailing list? Yes No
May we use your comments on websites or other marketing materials? Yes No
Number of
children
- Laguna cLubHouse treeHouse -
IMPORTANT PLEASE READ
Congratulations! You have just purchase one of the finest residential wooden swing sets available today. As
with any wooden product that spends its entire life outside, in varying elements, it is important to know what to
expect with your new swing set so that your family can enjoy it for many years.
As your swing set acclimates to its new environment, natural characteristics of the wood can show in the form
of checks, or “cracks” in the lumber. In almost all cases this is normal and it will not affect the structural
integrity of your play set and is not covered under warranty.
KEEPING YOUR PLAYSET LIKE NEW
MUST DO’s
The following owner responsibilities are crucial to the safety, integrity and aesthetic appeal of your
swing set and may affect the warranty if not adhered to.
WITHIN 60 DAYS
Check and tighten Hex Bolts/T-nuts, Carriage Bolts/Lock-nuts, and Lag Screws within the first 60 days and
then twice annually once before each season and then once during the season.
WITHIN 90 DAYS
Apply a sealant or semi-transparent stain with sealant within the first 90 days of owning the swing set. If
applicable state laws allow, an oil based product will penetrate and protect the lumber better than a water
based product. Because climate conditions can vary drastically from region to region, we suggest asking the
product covering specialists at any number of specialty paint stores or home improvement centers for a
product that would work best for your local environment. ** TIP while the set is new, take a small board from
your swing set to the store with you so they can color match the tint of the stain or sealant. Be sure to replace
the board when you get home.
SEASONAL REMINDERS
If your area experiences regular snowfall, remove your fabric tarp/canopy to avoid stretching, sagging or
tearing of the material. Store it inside, folded up, and it will be as good as new when winter is over.
If your area experiences extremely cold temperatures, remove swing belts and other pliable features to
prolong the lifespan of these play activities.
OTHER TIPS
Spray swing hangers with Pam, Mazola or olive oil to stop squeaking; do not use petroleum based products
such as WD-40 or motor oil.
To repel yellow jackets and wasps, use a cotton ball and dab interior wooden corners underneath the play set
deck with a liquid dish soap. Avoid using insecticides.
To speed up the slide wipe the center of slide with wax paper every 2 - 3 weeks.
For additional safety and maintenance guidelines, please visit our website.
IMPORTANT DOCUMENTS
CUSTOMER MUST READ AND RETAIN
Please go to the following links and read important SAFETY information prior
to using your new play structure.
http://www.playnation.com/safety-and-maintenance.html
http://www.playnation.com/manuals.html (Click on your specific model)
http://www.playnation.com/warranty.html
NOTE: Your children’s safety is our #1 concern. Observing the following statements
and warnings reduces the likelihood of serious injury. Please review these safety
rules regularly with your children.
WARNING:
Children must NOT use this play set until it has been
completely assembled and inspected by an adult to
ensure it has been properly installed
PlayNation Play Systems
190 Etowah Industrial Court
Canton, GA. 30114
FRONT VIEW
REAR VIEW
1518 Clubhouse Walls
FOR MODELS:
(1500CWC/1500CWCF/1500CWCR/1500CTC)
!!READ ME FIRST!!
The Clubhouse Walls for this unit will require removal of some boards to install the walls.
There will be some boards that will be leftover after the walls are installed.
Have you assembled your play set?
If yes, then READ the Leftover Parts notes at the bottom of this page, then turn the page
and proceed.
If no, then keep reading below.
If you have NOT already assembled your play set then you will need to do the following as
you are building your play set:
1) DO install the angle supports in Step 6B of the main instruction manual. These will
help stabilize the structure as construction progresses to the end.
2) DO NOT install the Safety Board in Step 33 (Side to Side Roof), Step 42 (Front to Back
Roof) or Step 31 (Tarp Roof) of the main instruction manual.
3) DO NOT install the Sandbox Seats in Step 47 (Side to Side Roof), Step 55 (Front to Back
Roof) or Step 44 (Tarp Roof) of the main instruction manual.
4) DO install the Clubhouse Walls after the entire play set structure is completed.
5) DO NOT build the picnic table until after the clubhouse walls are installed.
The 1500 play set series is modular. Because of this some parts will be leftover after the
Clubhouse Walls are installed.
Leftover Parts:
2 5/4 x 6 x 22” Sandbox Seats, 1 2 x 6 x 70” Sandbox Board,
All boards for the Picnic Table. The picnic table parts will be part of the leftover pieces for
this set. If your play set is already completed you may choose to remove the picnic table
from the right side of the unit and place it on the left side after the clubhouse walls are
installed. Placing the picnic table in this position will take up approximately 35% of the
useable floor space at the bottom of the play set.
*Clear Silicone Caulk will be needed to fill in any screw holes in the green posts.
WOOD SCREW
#8 X 1-3/4"
QTY: 118
#8 X 2"
WOOD SCREW
QTY: 28
#8 X 1-1/4"
WOOD SCREW
QTY: 58
5/16" TEE NUT
QTY: 2
5/16" WASHER
QTY: 16
2
5
6
7
8
9
1
4
3
USE THE RULER TO THE RIGHT TO MEASURE YOUR BOLTS AND SCREWS. PICTURE VIEWS SHOWN
ABOVE ARE 1:1 SCALE AND CAN BE USED TO MATCH BOLT AND SCREW SIZES.
5/16 X 4-1/2"
HEX BOLT
QTY: 4
#2 SQUARE
DRIVE TIP
QTY:1
3/8" x 1-1/8"
BLACK PLASTIC
PLUG
QTY: 2
11-0054
1518 HARDWARE
PAGE 1 OF 1
REV C: 3/24/2014 JH.
5/16 x 3-1/2"
LAG SCREW
QTY: 12
DESCRIPTIONPICTURE QTY.
1-4-0998-OWTB3
1 X 4 X 9"
TOP BOARD
125-6-2825-PS 7
PANEL SLAT
5/4 X 6 X 28-1/4"
WINDOW
1-3-1800-WTB 1
BOARD
WINDOW TOP
1 X 3 X 18"
1-3-2988-OWOS 1
OUTSIDE SUPPORT
OPEN WINDOW
1 X 3 X 29-7/8"
1-3-3475-WBB 1
BOTTOM BOARD
WINDOW
1 X 3 X 34-3/4"
1-3-4050-PBB 2
BRACE
PANEL BOARD
1 X 3 X 40-1/2"
1-4-0900-TBW 3
1 X 4 X 9-31/32"
OPEN WINDOW
TOP BOARD 3 2
DESCRIPTIONPICTURE QTY.
1-6-1360-OWTB1
1 X 6 X 11-3/16"
OPEN WINDOW
TOP BOARD 2
1-4-2775-BWB 5
WINDOW BOARD
BOTTOM
1 X 4 X 27-3/4"
1-4-2950-OWB 1
BOARD
OPEN WINDOW
1-4-5100-WB 6
WALL BOARD
1 X 4 X 51"
1 X 4 X 29-1/2"
1-6-0843-TBD2 2 DOOR 2
TOP BOARD
1 X 6 X 8-7/16"
1-6-1020-TBD1 2
DOOR 1
TOP BOARD
1 X 6 X 10-3/16"
1-6-1118-OWTB2 2
1 X 6 X 13-5/8"
OPEN WINDOW
TOP BOARD 1 2
DESCRIPTIONPICTURE QTY.
2-6-7000-BPBD
2 X 4 X 70"
BOTTOM WALL
BOARD
1-6-2700-ATBD 1
BOARD DOOR
ARCH TOP
1 X 6 X 27"
1-6-2775-BBOW 4
OPEN WINDOW
BOTTOM BOARD
1 X 6 X 27-3/4"
1-6-3400-TBW 1WINDOW
TOP BOARD
1-6-5100-WB 11
WALL BOARD
1 X 6 X 51"
1 X 6 X 34"
2-4-4750-TPB 1
BOARD
TOP PANEL
2 X 4 X 47-1/2"
2-4-7000-BWB 2
2 X 6 X 70"
BOTTOM PANEL
BOARD DOOR 1
(NOT SHOWN)
WINDOW
1
11-0054
1
07-0013
1518
HARDWARE
1
2 X 6 X 47-1/2"
BOTTOM
BOARD TUBE
SLIDE
2-6-4750-BBTS
PICTURE DESCRIPTION QTY.
STEP 1: REMOVING THE PICNIC TABLE
1: REMOVE THE PICNIC TABLE TO ATTACH THE RIGHT SIDE CLUBHOUSE WALL.
2: REMOVE THE SCREWS THAT CONNECT THE PICNIC TABLE SUPPORTS TO THE CORNER POSTS.
3: SET THE PICNIC TABLE ASSEMBLY AND SCREWS ASIDE IN CASE YOU WISH TO REINSTALL THE
PICNIC TABLE ON THE OTHER SIDE OF THE FORT LATER.
4: PLACE CLEAR SILICONE IN THE SCREW HOLES IN THE CORNER POSTS.
PICNIC TABLE
SANDBOX SEAT
STEP 2: REMOVING SANDBOX SEATS
1: REMOVE THE TWO SANDBOX SEAT BOARDS TO ATTACH THE WALL BOARDS.
STEP 3: REMOVING THE ANGLE SUPPORTS
1: REMOVE THE BACK AND SIDE ANGLE SUPPORTS UNDER THE DECK.
2: KEEP THE TWO ANGLE SUPPORTS AT THE FRONT.
3: AFTER YOU INSTALL ALL THE CLUBHOUSE WALLS PUT THE ANGLE SUPPORTS BACK ON. IT IS A
GOOD IDEA TO LEAVE SCREWS IN THE ANGLE SUPPORTS AND TO NUMBER THEM AND THEIR
LOCATION FOR LATER.
4: PLACE CLEAR SILICONE IN THE SCREW HOLES IN THE CORNER POSTS FOR THE ANGLE
SUPPORTS AT THE LEFT AND RIGHT SIDES OF THE SET.
ANGLE SUPPORT
/