VADDIO 999-2225-050 Quick start guide

Hello! I've reviewed the Quick-Start guide for the Vaddio IN-Ceiling Half Recessed Enclosures. This document details the installation and components of the enclosure, which supports various camera series, including ClearVIEW, PowerVIEW, and RoboSHOT. I'm ready to assist you with any questions you have about this product.
What cameras are compatible with this enclosure?

What is included in the box?

Is additional hardware required for installation?

IN-Ceiling

Half-Recessed

Enclosure

What’s in the box?

• Metal Black Box & IR Circuit Board

• Black Box Lid

• White Trim Ring

• 18” IR Receiver Cable

• 24” Cat-5e Patch Cable

• Hardware

• Tile support Brace

• 3/4” Clamp Down Conduit Connector

• 1” Platform Spacer Black

PRODUCT INFO:

IN-Ceiling Half Recessed Enclosure

ClearVIEW & PowerVIEW Cameras

999-2225-050

RoboSHOT Series Cameras

999-2225-150

All other trademarks are property of their respective

owners. Reproduction in whole or in part without written

permission is prohibited. Specications and pricing are

subject to change without notice or obligation.

For additional product information, tech specs, warranty,

repair, and return policies, please visit us online at

support.vaddio.com.

Vaddio, ClearVIEW, PowerVIEW, RoboSHOT, and

IN-Ceiling are a trademark of Vaddio.

Quick-Start No. 342-0867 Rev. A

12.08.14

IN-Ceiling Half Recessed Enclosure

Visit us online at support.vaddio.com

Click on manuals, and select the full

IN-Ceiling Half-Recessed Enclosure Manual.

Quick-Start No. 342-0867 Rev. A

12.08.14 For additional product information, tech specs, warranty, repair, and return policies, please visit us online at support.vaddio.com.

IN-Ceiling Recessed Enclosure

Visit us online at support.vaddio.com

Click on manuals, and select the full IN-Ceiling Half-Recessed Enclosure Manual.