Swisher LD-57 is a landscape drag designed to level and smooth large areas of soil, sand, or gravel. It features a durable steel construction with adjustable leveling blades for precise grading. The LD-57 can be easily attached to an ATV or lawn tractor for convenient operation, making it ideal for landscaping projects, yard maintenance, and gardening tasks.
Swisher LD-57 is a landscape drag designed to level and smooth large areas of soil, sand, or gravel. It features a durable steel construction with adjustable leveling blades for precise grading. The LD-57 can be easily attached to an ATV or lawn tractor for convenient operation, making it ideal for landscaping projects, yard maintenance, and gardening tasks.
Owner’s
Manual
LD-57
IMPORTANT
Read and follow all
Safety Precautions
and Instructions
Before Operating this
Equipment.
Made In CHINA
1602 CORPORATE DRIVE , PO BOX 67, WARRENSBURG, MISSOURI 64093
PH 660. 747. 8183 FAX 660. 747. 8650
www.swisherinc.com
MANUFACTURING QUALITY LAWN CARE EQUIPMENT SINCE 1945
14673 REV. 08-246
LANDSCAPE DRAG
LIMITED WARRANTY
The manufacturer’s warranty to the original consumer purchaser is: This product is free
from defects in materials and workmanship for a period of One (1) year from the date of
purchase by the original consumer purchaser. We will repair or replace, at our discretion,
parts found to be defective due to materials or workmanship. This warranty is subject to the
following limitations and exclusions:
In the event you have a claim under this warranty, you must return the product to an
authorized service dealer. All transportation charges, damage, or loss incurred during
transportation of parts submitted for replacement or repair under this warranty shall be borne
by the purchaser. Should you have any questions concerning this warranty, please contact
us toll-free at 1-800-222-8183. The model number, serial number, date of purchase, and the
name of the authorized Swisher dealer from whom you purchased the mower will be needed
before any warranty claim can be processed.
THIS WARRANTY DOES NOT APPLY TO ANY INCIDENTAL OR CONSEQUENTIAL
DAMAGES AND ANY IMPLIED WARRANTIES ARE LIMITED TO THE SAME TIME
PERIODS STATED HEREIN FOR ALL EXPRESSED WARRANTIES. Some states do not
allow the limitation of consequential damages or limitations on how long an implied warranty
may last, so the above limitations or exclusions may not apply to you. This warranty gives
you specific legal rights and you may have other rights, which vary from state-to-state. This is
a limited warranty as defined by the Magnuson-Moss Act of 1975.
1) Commercial Use This product is not intended for commercial use and
carries no commercial warranty.
2) Limitation This warranty applies only to products which have been
properly assembled, adjusted, and operated in accordance
with the instructions contained within this manual. This
warranty does not apply to any product of Swisher Mower
Co., Inc., that has been subject to alteration, misuse, abuse,
improper assembly or installation, shipping damage, or to
normal wear of the product.
3) Exclusions Excluded from this warranty are normal wear, normal
adjustments, and normal maintenance.
2
2
3
ATV/LAWN TRACTOR LANDSCAPE DRAG ASSEMBLY INSTRUCTIONS
Step 1: Connect the Right Long Steel Angle to the Left Long Steel Angle
using the hex bolts and locknuts as shown.
Left Long Steel Angle
Hex Bolt M10 x 20
Right Long Steel Angle
Lock Nut M10
Step 2: Connect the Right Short Steel Angle to the Left Short Steel Angle
using the hex bolts and locknuts as shown.
Left Short Steel Angle
Lock Nut M10
Hex Bolt M10 x 20
Right Short
Step 3: Connect the Front Steel Angle Assembly to the Rear Steel Angle
Assembly using the two Steel Angle Supports, connect using 2
Spacers, Hex Bolt M10X35 and M10 Locknut. (4 Places)
Hex Bolt M10 x 35
2 Spacers
M10 Locknut
Rear Steel Angle Assembly
Steel Angle
Front Steel Angle Assembly
4
Step 4: Connect the Front Steel Angle Assembly to the Rear Steel Angle
Assembly with the two Steel Connecting Straps using the
Hex Bolt and Lock Nut. (4 Places)
Steel Connecting Straps
Lock Nut M10 (4 Places)
Hex Bolt M10 x 20 (4 Places)
Step 5: Connect the Tongue to the Main frame using the Hex Bolt and Lock Nuts.
Install the Hitch pin and the R pin into Tongue.
Main Frame
Tongue
Hitch Pin
R Pin
Hex Bolt M10 x 55
Lock Nut M10
5
ATV/LAWN TRACTOR LANDSCAPE DRAG
PARTS LIST
ITEM# Part Number DESC QTY Part Number ITEM# DESC QTY
1 14538 Right long steel angle 1 14542 8 Steel angle support 2
2 12220 Lock Nut M10 16 14543 9 Left short steel angle 1
3 10894 Bolt M10×20 11 14544 10 Right short steel angle 1
4 14531 Spacer 8 NB630 11 Bolt M10×60 1
5 13273 Bolt M10×35 4 16911 12 Tongue 1
6 14539 Left long steel angle 1 NB127 13 #3 Hair Pin 1
7 14541 Steel connecting strap 2 14679 14 Hitch Pin 1
www.swisherinc.com
MANUFACTURING QUALITY LAWN CARE EQUIPMENT SINCE 1945
WHEN ORDERING PARTS, PLEASE HAVE THE
FOLLOWING INORMATION AVAILABLE:
* PRODUCT – ________________
* SERIAL NUMBER - _______________
* MODEL NUMBER - _______________
TYPE - _______________
* PART NUMBER WITH PAINT CODE
* PART DESCRIPTION
TELEPHONE - 1-800-222-8183
FAX - 1-660-747-8650
SWISHER MOWER & MACHINE CO. INC.
SWISHER MOWER & MACHINE CO. INC.SWISHER MOWER & MACHINE CO. INC.
SWISHER MOWER & MACHINE CO. INC.
1602 CORPORATE DRIVE
P.O. BOX 67
WARRENSBURG, MO 64093
ATV & LAWN ACCESSORIES
Owner’s
Manual
IMPORTANT
Read and follow all
Safety Precautions
and Instructions
Before Operating this
Equipment.
LD-57
-
1
-
2
-
3
-
4
-
5
-
6
Swisher LD-57 is a landscape drag designed to level and smooth large areas of soil, sand, or gravel. It features a durable steel construction with adjustable leveling blades for precise grading. The LD-57 can be easily attached to an ATV or lawn tractor for convenient operation, making it ideal for landscaping projects, yard maintenance, and gardening tasks.
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
-
Swisher PL-51 Owner's manual
-
-
-
-
-
-
-
-
Swisher RC14544CPKA User manual
-
