DID YOU KNOW?
You can stream music from a bluetooth enabled
device via the CD boombox speakers.
GETTING STARTED:
Follow the instructions below to connect and power
on the Boombox.
a
b
c
Slide the function switch to the position.
After entering bluetooth mode the blue
LED will flash to indicate the boombox is in
pairing mode, with no device connected.
Enable bluetooth on your audio device and
search for available bluetooth connections.
Select GPS04BLK from the list. If you are
asked for a pass code enter ‘0000’.
a
b
c
d
To connect the power insert the figure 8 shaped end
into the rear of the unit.
Insert the plug into a power socket and switch the
power on.
Press the
button to wake the boombox from
standby mode.
Set the function switch to either RADIO/ CD/bluetooth
or AUX.
a
b
c d