DSC PC5950 User manual

Brand: DSC

Model: PC5950

Type: User manual

PC5950 Audio Verification Module

User Guide

User Access VIA Telephone Call-in

There are two methods available for accessing the unit. They are:

1. Number of Rings.

2. Answering Machine override (or Double call).

NOTE: Please consult your installer to set this up according to your preference.

• The unit can be called from an external phone and upon answering you will hear

ACK beeps to indicate initial access.

• Enter the four digit user code (default: 1234). After the valid code is accepted,

you will hear distinctive set of tones and user session will be active.

When the user session is active, it is already in VOX mode (Talk/Listen). Following

are the touch tone telephone key options for different functions:

Changing User Code

1. Once the unit is on line you are ready to access programming mode.

2. Enter [*] [5]. You will hear three low beeps to acknowledge entering the pro-

gramming section.

3. Enter the new code. Two low beeps are given to acknowledge data entering.

4. Enter the new code again to confirm the code is valid. If the two codes are same

the new code will be saved automatically and you will hear three low beeps

acknowledgement. PC5950 will go back to user call in two way session. If the

two codes entered are not the same then the code will not be changed and you

will hear an error tone. PC5950 is still waiting for the code to be entered until

time out. (If the key is not entered within the next 10s PC5950 will go back to

user call in two way session.)

NOTE: Only the installer or service professional should have access to the audio ver-

ification module.

Touch-Tone Key Function

2 VOX (Talk/Listen)

3 Listen Only

7 Extend Time (2 minutes)

99 Disconnect

Toronto, Canada • www.dsc.com

Printed in Canada

29007440R00129007322R002

PC5950 Audio Verification Module

User Guide

User Access VIA Telephone Call-in

There are two methods available for accessing the unit. They are:

1. Number of Rings.

2. Answering Machine override (or Double call).

NOTE: Please consult your installer to set this up according to your preference.

• The unit can be called from an external phone and upon answering you will hear

ACK beeps to indicate initial access.

• Enter the four digit user code (default: 1234). After the valid code is accepted,

you will hear distinctive set of tones and user session will be active.

When the user session is active, it is already in VOX mode (Talk/Listen). Following

are the touch tone telephone key options for different functions:

Changing User Code

1. Once the unit is on line you are ready to access programming mode.

2. Enter [*] [5]. You will hear three low beeps to acknowledge entering the pro-

gramming section.

3. Enter the new code. Two low beeps are given to acknowledge data entering.

4. Enter the new code again to confirm the code is valid. If the two codes are same

the new code will be saved automatically and you will hear three low beeps

acknowledgement. PC5950 will go back to user call in two way session. If the

two codes entered are not the same then the code will not be changed and you

will hear an error tone. PC5950 is still waiting for the code to be entered until

time out. (If the key is not entered within the next 10s PC5950 will go back to

user call in two way session.)

NOTE: Only the installer or service professional should have access to the audio ver-

ification module.

Touch-Tone Key Function

2 VOX (Talk/Listen)

3 Listen Only

7 Extend Time (2 minutes)

99 Disconnect

Toronto, Canada • www.dsc.com

Printed in Canada

29007322R002

DSC PC5950 User manual

DSC PC5950 User manual

Related papers

Other documents