2. Home
  3. Home security & automation
  4. Security device components
  5. Dometic
  6. Igntion Interlock Kit 3313283.008

Dometic Igntion Interlock Kit 3313283.008, 12/22/16; 3313283.008 Ignition Interlock Kit, 3313283.008 Owner's manual

  • Hello! I am an AI chatbot trained to assist you with the Dometic Igntion Interlock Kit 3313283.008 Owner's manual. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
USA
SERVICE OFFICE
Dometic Corporation
1120 North Main Street
Elkhart, IN 46514
CANADA
Dometic Corporation
46 Zatonski, Unit 3
Brantford, ON N3T 5L8
CANADA
SERVICE CENTER &
DEALER LOCATIONS
Please Visit:
www.eDometic.com
USA
SERVICE OFFICE
Dometic Corporation
1120 North Main Street
Elkhart, IN 46514
CANADA
Dometic Corporation
46 Zatonski, Unit 3
Brantford, ON N3T 5L8
CANADA
SERVICE CENTER &
DEALER LOCATIONS
Please Visit:
www.eDometic.com
Wire colors noted within this document are industry standard. Some RV
manufacturers use different colors. Refer to RV manufacturer’s wiring
schematics.
1. Find a location for ignition interlock that’s as close as possible to
awning switch, and protected from weather and other adverse condi-
tions.
2. Install a (15 A) fuse (installer supplied) at fuse panel
for positive (+) 12 Vdc power supply ( RED wire) to switch, and for
positive (+) 12 Vdc ignition control ( PINK wire) to ignition interlock.
Otherwise, damage to unit could occur.
3. Wire switch as shown in graphic using the correct wire gauge shown
in “Table 1”.
Table 1
Wire Length Wire Size
10′ & Under 14 Gauge
11′ to 30′ 12 Gauge
Over 30′ 10 Gauge
IGNITION INTERLOCK KIT
3313283.008
IGNITION INTERLOCK KIT
3313283.008
REVISION A
Form No. 3314736.000 12/16
(French 3314737.000_A)
©2016 Dometic Corporation
LaGrange, IN 46761
REVISION A
Form No. 3314736.000 12/16
(French 3314737.000_A)
©2016 Dometic Corporation
LaGrange, IN 46761
Wire colors noted within this document are industry standard. Some RV
manufacturers use different colors. Refer to RV manufacturer’s wiring
schematics.
1. Find a location for ignition interlock that’s as close as possible to
awning switch, and protected from weather and other adverse condi-
tions.
2. Install a (15 A) fuse (installer supplied) at fuse panel
for positive (+) 12 Vdc power supply ( RED wire) to switch, and for
positive (+) 12 Vdc ignition control ( PINK wire) to ignition interlock.
Otherwise, damage to unit could occur.
3. Wire switch as shown in graphic using the correct wire gauge shown
in “Table 1”.
Table 1
Wire Length Wire Size
10′ & Under 14 Gauge
11′ to 30′ 12 Gauge
Over 30′ 10 Gauge
2
2
86
85
87A 87
30
+12VDC IGNITION CONTROL
(PINKWIRE)
-12VDC FROM SOURCE
(BLACK WIRE)
+12VDC FROMSOURCE
(RED WIRE)
+12VDC TO AWNING
(RED WIRE)
-12VDC TO AW NING
(BLACK WIRE)
-12VDC
(BLACK WIRE)
+12VDC
(RED WIRE)
Ignition Interlock
Awning Switch
See switch instructions
for terminal numbering
and location.
86
85
87A 87
30
+12VDC IGNITION CONTROL
(PINKWIRE)
-12VDC FROM SOURCE
(BLACK WIRE)
+12VDC FROMSOURCE
(RED WIRE)
+12VDC TO AWNING
(RED WIRE)
-12VDC TO AW NING
(BLACK WIRE)
-12VDC
(BLACK WIRE)
+12VDC
(RED WIRE)
Ignition Interlock
Awning Switch
See switch instructions
for terminal numbering
and location.
/