LG MCT435-A0U User manual

LG
Brand
LG
Model
MCT435-A0U
Category
CD players
Type
User manual

This manual is also suitable for

OWNER’S MANUAL
Mini Hi-Fi System
MODEL
MCT435 (MCT435, MCS435F, MCS435W)
P/NO : MFL63266242
Please read this manual carefully before operating
your set and retain it for future reference.
ENGLISH
MCT435-AOU-SMEXCLK-ENG.indd 1MCT435-AOU-SMEXCLK-ENG.indd 1 2010.3.11 4:26:25 PM2010.3.11 4:26:25 PM
2 Safety Information
Safety Information
1
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK
DO NOT REMOVE COVER (OR BACK) NO USER-
SERVICEABLE PARTS INSIDE REFER SERVICING TO
QUALIFIED SERVICE PERSONNEL.
This lightning  ash with
arrowhead symbol within an
equilateral triangle is intended to
alert the user to the presence of
uninsulated dangerous voltage
within the product’s enclosure
that may be of su cient
magnitude to constitute a risk of
electric shock to persons.
The exclamation point within an
equilateral triangle is intended
to alert the user to the presence
of important operating and
maintenance (servicing)
instructions in the literature
accompanying the product.
WARNING: TO PREVENT FIRE OR ELECTRIC SHOCK
HAZARD, DO NOT EXPOSE THIS PRODUCT TO RAIN
OR MOISTURE.
WARNING: Do not install this equipment in a
con ned space such as a book case or similar unit.
CAUTION: This product employs a Laser System.
To ensure proper use of this product, please read
this owner’s manual carefully and retain it for future
reference. Shall the unit require maintenance,
contact an authorized service center.
Use of controls, adjustments or the performance of
procedures other than those speci ed herein may
result in hazardous radiation exposure.
To prevent direct exposure to laser beam, do not try
to open the enclosure. Visible laser radiation when
open. DO NOT STARE INTO BEAM.
CAUTION: The apparatus shall not be exposed to
water (dripping or splashing) and no objects  lled
with liquids, such as vases, shall be placed on the
apparatus.
CAUTION concerning the Power Cord
Most appliances recommend they be placed upon a
dedicated circuit;
That is, a single outlet circuit which powers only
that appliance and has no additional outlets or
branch circuits. Check the speci cation page of this
owner’s manual to be certain. Do not overload wall
outlets. Overloaded wall outlets, loose or damaged
wall outlets, extension cords, frayed power cords, or
damaged or cracked wire insulation are dangerous.
Any of these conditions could result in electric
shock or  re. Periodically examine the cord of your
appliance, and if its appearance indicates damage
or deterioration, unplug it, discontinue use of the
appliance, and have the cord replaced with an exact
replacement part by an authorized service center.
Protect the power cord from physical or mechanical
abuse, such as being twisted, kinked, pinched, closed
in a door, or walked upon. Pay particular attention
to plugs, wall outlets, and the point where the cord
exits the appliance. To disconnect power from the
mains, pull out the mains cord plug. When installing
the product, ensure that the plug is easily accessible.
1
Safety Information
MCT435-AOU-SMEXCLK-ENG.indd 2MCT435-AOU-SMEXCLK-ENG.indd 2 2010.3.11 4:26:27 PM2010.3.11 4:26:27 PM
3Safety Information
1
Safety Information
CAUTION: Do not block any ventilation openings.
Install in accordance with the manufacturer’s
instructions.
Slots and openings in the cabinet are provided for
ventilation and to ensure reliable operation of the
product and to protect it from over heating. The
openings should be never be blocked by placing the
product on a bed, sofa, rug or other similar surface.
This product should not be placed in a built-
in installation such as a bookcase or rack unless
proper ventilation is provided or the manufacturer’s
instruction has been adhered to.
This device is equipped with a portable battery or
accumulator.
Safe way to remove the battery or the battery
from the equipment:
Remove the old battery pack, follow the steps
in reverse order than the assembly. To prevent
contamination of the environment and bring on
possible threat to human and animal health, the
old battery or the battery put in the appropriate
container at designated collection points. Do not
dispose of batteries or battery together with other
waste. It is recommended that you use local, free
reimbursement system batteries and accumulators.
The battery shall not be exposed to excessive heat
such as sunshine,  re or the like.
You have to set the disc format option to [Mastered]
in order to make the discs compatible with the LG
players when formatting rewritable discs. When
setting the option to Live File System, you cannot
use it on LG players.
(Mastered/ Live File System : Disc format system for
Windows Vista)
MCT435-AOU-SMEXCLK-ENG.indd 3MCT435-AOU-SMEXCLK-ENG.indd 3 2010.3.11 4:26:28 PM2010.3.11 4:26:28 PM
4 Contents
1
2
3
4
5
6
7
1
Safety Information
2 CAUTION
5 Unique Features
2
Preparation
6 Accessories
6 Playable fi le Requirement
7 Remote Control
8 Front panel
10 Rear panel
3
Installation
11 Connecting the speakers
11 Attaching the speakers to the
unit
11 Antenna Connection
12 Other Equipment Connection
12 USB Connection
12 AUX IN Connection
4
Operation
13 Basic Operations
13 CD/ USB Operations
14 TAPE Operation
14 Listening to cassette tapes
14 Other Operations
14 Programmed Playback
15 AUTO DJ playback
15 Sleep Timer Setting
15 Dimmer
15 Turning off the sound
temporarily
16 Setting the Clock
16 Using your player as an alarm
clock
17 DEMO
17 Displaying fi le information (ID3
TAG )
17 Listening to music from your
external device
18 Recording to TAPE
18 Synchronized Recording from
CD to Tape
18 Recording to USB
20 Setting the surround mode
20 Setting the USER EQ
21 Radio Operations
21 Listening to the radio
21 Presetting the Radio Stations
21 Deleting all the saved stations
21 Improving poor FM reception
MCT435-AOU-SMEXCLK-ENG.indd 4MCT435-AOU-SMEXCLK-ENG.indd 4 2010.3.11 4:26:28 PM2010.3.11 4:26:28 PM
5Contents
1
2
3
4
5
6
7
5
Maintenance
22 Handling the Unit
22 Notes on Discs
6
Troubleshooting
23 Troubleshooting
7
Appendix
24 Specifi cations
Unique Features
USB Direct Recording
Records music to your USB device.
AUTO DJ
Auto DJ blends the end of one song into the
beginning of another for seamless playback.
MCT435-AOU-SMEXCLK-ENG.indd 5MCT435-AOU-SMEXCLK-ENG.indd 5 2010.3.11 4:26:28 PM2010.3.11 4:26:28 PM
6 Preparation
Preparation
2
2
Preparation
Accessories
Please check and identify the supplied
accessories.
FM Antenna (1)
Remote Control (1)/
Battery (1)
AM Antenna (1)
Playable fi le
Requirement
MP3/ WMA music fi le requirement
MP3/ WMA  le compatibility with this unit is
limited as follows :
• Sampling frequency : within 32 to 48 kHz
(MP3), within 32 to 48kHz (WMA)
• Bit rate : within 32 to 320 kbps (MP3), 40 to
320 kbps (WMA)
• maximum  les : Under 999
• File extensions : “.mp3”/ “.wma”
• CD-ROM  le format : ISO 9660/ JOLIET
• We recommend that you use Easy-CD
Creator, which creates an ISO 9660  le
system.
Compatible USB Devices
• MP3 Player : Flash type MP3 player.
• USB Flash Drive : Devices that support
USB 2.0 or USB 1.1.
• The USB function of this unit does not
support all USB devices.
USB device requirement
• Devices which require additional program
installation when you have connected it to
a computer, are not supported.
• Do not extract the USB device while in
operation.
• For a large capacity USB, it may take longer
than a few minute to be searched
• To prevent data loss, back up all data.
• If you use a USB extension cable or USB
hub, the USB device is not recognized.
• Using NTFS  le system is not supported.
(Only FAT(16/32)  le system is supported.)
• This unit is not supported when the total
number of  les is 1 000 or more.
• External HDD, Card readers, Locked devices,
or hard type USB devices are not supported.
• USB port of the unit cannot be connected
to PC. The unit can not be used as a storage
device
MCT435-AOU-SMEXCLK-ENG.indd 6MCT435-AOU-SMEXCLK-ENG.indd 6 2010.3.11 4:26:28 PM2010.3.11 4:26:28 PM
7Preparation
2
Preparation
Remote Control
Remote control
a
b
c
• • • • • • • • • a • • • • • • • •
POWER : Switches the unit ON or OFF.
EQ : You can choose sound impressions.
LGEQ : You can select a Natural or Local
Specialization equalizer e ect.
OPEN/CLOSE : Opens and closes the disc tray.
PRESET/FOLDER : Searches for a folder of
MP3/ WMA  les. When a CD/ USB containing
MP3/ WMA  les in several folders is being
played, press PRESET/FOLDER selects the
folder you want to play. Choose a ‘preset
number’ for a radio station.
FUNCTION : Selects the function and input
source.
(MUTE) : Mutes the sound.
VOLUME : Volume control.
• • • • • • • • • b • • • • • • • • •
SLEEP : Sets the System to turn o
automatically at a speci ed time. (Dimmer :
The display window will be darken by half.)
INFO : Checks information about your music.
MP3/ WMA  les often come with tags. The
tag gives the Title, Artist, Album or Time
information.
REPEAT : Selects a desired play mode.
TUN. (-/+) : Selects the radio station.
. m
/
M >
(SKIP/ SEARCH) :
- Searches for a section within a track.
- Skips Fast backward or Forward.
B
/
X
: Starts or pauses playback.
x
: Stop.
PROGRAM/MEMO : For storing radio stations.
If you have saved radio stations using
PROGRAM/MEMO, you can scroll through
them and select one.
z
(REC) : Recording.
• • • • • • • • • c • • • • • • • • •
AUTO DJ : Selects the AUTO DJ mode.
(For more information refer to the page 15.)
D.SKIP : Chooses a desired CD.
MCT435-AOU-SMEXCLK-ENG.indd 7MCT435-AOU-SMEXCLK-ENG.indd 7 2010.3.11 4:26:29 PM2010.3.11 4:26:29 PM
8 Preparation
Preparation
2
Front panel
c
d
i
j
e
f
g
h
k
uv
w
a
b
q
m
o
n
l
p
r
t
s
x
y
MCT435-AOU-SMEXCLK-ENG.indd 8MCT435-AOU-SMEXCLK-ENG.indd 8 2010.3.11 4:26:29 PM2010.3.11 4:26:29 PM
9Preparation
2
Preparation
a
Disc tray
b
Display window
c
1
/
)
( Power ON/ OFF )
d
USB/DEMO
Selects the USB or DEMO function.
CD
Selects the CD function.
TUNER
Selects the TUNER function.
TAPE
Selects the TAPE function.
AUX
Selects the AUX function.
ef
EQ/ LG EQ
You can choose sound impressions.
g
USER EQ
You can adjust sound level to your
preference.
h
BASS BLAST/
Reinforces the treble, bass and
surround e ect.
MP3 OPT.
This function is optimized for
compressible MP3  le. It improves the
treble sound.
i
SET/ CD
X
Pauses or con rms the setting.
j
AUTO DJ
Selects the AUTO DJ mode.
k
OPEN/CLOSE
l
CD SYNC
From CD to TAPE Synchronized Recording
Starts playback.
m
CLOCK
Sets clock and checks the time.
n
TIMER
Use your player as an alarm clock.
o
DISC SKIP
Chooses a desired CD.
p
STOP
q
R (Record)
Recording.
r
USB port
You can play sound  les by connecting
the USB device.
s
Headphone jack
A warning that excessive sound
pressure from earphones and
headphones can cause hearing loss.
t
Cassette
u
PRESET -/ <
- TAPE reverse play
- Selects preset numbers
v
PRESET + / >
- CD play, TAPE forward play
- Selects preset numbers
wx
|<< (-)TUNING(+) >>|
- Searches backward or forward
- Skips to the previous/ next track
- Selects the radio station
y
Volume knob
Volume control.
MCT435-AOU-SMEXCLK-ENG.indd 9MCT435-AOU-SMEXCLK-ENG.indd 9 2010.3.11 4:26:29 PM2010.3.11 4:26:29 PM
10 Preparation
Preparation
2
a
ANTENNA (FM, AM)
b
AUX IN connector
c
SPEAKER connector
d
Cooling fan
Rear panel
b
a
d
c
MCT435-AOU-SMEXCLK-ENG.indd 10MCT435-AOU-SMEXCLK-ENG.indd 10 2010.3.11 4:26:30 PM2010.3.11 4:26:30 PM
11Installation
3
Installation
Connecting the
speakers
Attaching the speakers to the
unit
To connect the cable to the unit, press each
plastic  nger pad to open the connection
terminals on the unit. Insert the wire and
release the  nger pad.
Connect the black end of each wire to the
terminals marked - (minus) and the other end
to the terminals marked + (plus).
CAUTION
• Be careful to make sure children do not put their
hands or any objects into the *speaker duct.
*Speaker duct : A hole for plentiful bass sound
on speaker cabinet (enclosure).
• The speakers contain magnet parts, so color
irregularity may occur on the TV screen or PC
monitor screen. Please use the speakers far away
from either TV screen or PC monitor.
Antenna Connection
Connect the supplied FM (F) /AM (A) antenna
for listening to the radio.
Antenna Connection
NOTE
• To prevent noise pickup, keep the AM Loop
antenna away from the unit and other
components.
• Be sure to fully extend the FM wire antenna.
After connecting the FM wire antenna, keep it as
horizontal as possible.
3
Installation
MCT435-AOU-SMEXCLK-ENG.indd 11MCT435-AOU-SMEXCLK-ENG.indd 11 2010.3.11 4:26:30 PM2010.3.11 4:26:30 PM
12 Installation
Installation
3
Other Equipment
Connection
USB Connection
Connect the USB port of USB Memory (or MP3
player, etc.) to the USB port on the front of the
unit.
USB Connection
Removing the USB Device from the
unit
1. Choose a di erent function mode or
press STOP (
x
) twice in a row.
2. Remove the USB device from the unit.
Compatible USB Devices
• MP3 Player : Flash type MP3 player.
• USB Flash Drive : Devices that support
USB 2.0 or USB 1.1.
• The USB function of this unit does not
support some USB devices.
USB device requirement
• Devices which require additional program
installation connected to a computer, are
not supported.
• Do not extract the USB device while in
operation.
• For a large capacity USB, it may take longer
than a few minute to be searched.
• To prevent data loss, back up all data.
• If you use a USB extension cable or USB
hub, the USB device is not recognized.
• Using NTFS  le system is not supported.
(Only FAT(16/ 32)  le system is supported.)
• This unit is not supported when the total
number of  les is 1 000 or more.
• External HDD, Card readers, Locked devices,
or hard type usb devices are not supported.
• USB port of the unit cannot be connected
to PC. The unit can not be used as a storage
device.
AUX IN Connection
Connect a Output of auxiliary device to the
AUX AUDIO Input (L/R) Connector.
If your TV has only one output for audio
(mono), connect it to the left (white) audio jack
on the unit.
AUX IN Connection
MCT435-AOU-SMEXCLK-ENG.indd 12MCT435-AOU-SMEXCLK-ENG.indd 12 2010.3.11 4:26:30 PM2010.3.11 4:26:30 PM
13Operation
4
Operation
Basic Operations
CD/ USB Operations
1. Insert the disc by using the
OPEN/CLOSE or connect the USB device to
the USB port.
2. Select the CD or USB function by pressing
FUNCTION on the remote control or CD,
USB button on the unit.
3 Select the disc by pressing DISC SKIP on
the unit or D.SKIP on the remote control.
To Do this
Stop
Press
x
on the remote
control or STOP on the unit.
Playback
Press
B
/
X
on the remote
control or PRESET+ > on
the unit.
Pause
Press
B
/
X
on the remote
control or SET/ CD
X
on
the unit.
To Do this
Skipping to
the next/
previous
track/  le
During playback, press
. m
or
M >
on
the remote control or
|<< or >>| on the unit
to go to the next track/
le or to return to the
beginning of the current
track/  le.
Press
. m
on the
remote control or |<< on
the unit twice brie y to step
back to the previous track/
 l e .
Searching
for a section
within a track
Press and hold
. m
or
M >
during playback
and release it at the point
you want to listen to.
Playing
repeatedly or
randomly
Press REPEAT on the
remote control repeatedly,
the display changes in the
following order, RPT 1 ->
RPT DIR (Only MP3/WMA)
-> RPT DISC -> RPT ALL ->
RANDOM -> OFF.
4
Operation
MCT435-AOU-SMEXCLK-ENG.indd 13MCT435-AOU-SMEXCLK-ENG.indd 13 2010.3.11 4:26:30 PM2010.3.11 4:26:30 PM
14 Operation
Operation
4
TAPE Operation
Listening to cassette tapes
Cassette tapes can be played back in this unit.
1. Open the tape door by pressing
Z
PUSH EJECT.
2. Insert the tape.
3. Close the tape door.
4. Select the TAPE funtion by pressing TAPE
on the unit or FUNCTION on the remote
control.
To Do this
Stop
Press
x
on the remote
control or STOP on the unit.
Playback
Press
B
/
X
on the remote
control or < PRESET - /
PRESET+ > on the unit.
Change
direction
Press
B
/
X
repeatedly on
the remote control or
< PRESET - / PRESET + >
on the unit.
Searching for a
section within
a track
After pressing
. m
/
M >
during playback,
press
B
/
X
at a point you
want.
Play mode
You can set the tape to play
one side
, both sides
one time , or both
sides repeatedly , by
pressing REPEAT one or
more times.
Other Operations
Programmed Playback
The program function enables you to store
your favourite  les from any disc or USB device.
A program can contain 20 tracks.
1. Insert a CD or USB and wait for it to be
order.
2. Press PROGRAM/MEMO on the remote
control in stop status.
3. Press
. m
or
M >
on the remote
control or |<< / >>| on the unit to select a
track.
4. Press PROGRAM/MEMO again to save and
select a next track.
5. Press
B
/
X
to play the programmed music
les.
6. To clear your selection, press
x
twice.
NOTE
The programs are also cleared when the disc or
USB device is removed, the unit is switched to
power o or the function is switched to others.
MCT435-AOU-SMEXCLK-ENG.indd 14MCT435-AOU-SMEXCLK-ENG.indd 14 2010.3.11 4:26:31 PM2010.3.11 4:26:31 PM
15Operation
AUTO DJ playback
Auto DJ blends the end of one song into
the beginning of another for seamless
playback. It equalizes volume across tracks for
uninterrupted playback.
Press AUTO DJ on the remote control or unit
repeatedly, the display changes as followings.
order, (AUTO DJ RANDOM) ->
(AUTO DJ SEQUENTIAL) -> (AUTO DJ OFF).
Mode
Display
Window
Description
OFF
-
(AUTO DJ OFF)
-
RANDOM
-
(AUTO DJ
RANDOM)
The music
is played
randomly on
this mode.
REPEAT
-
(AUTO DJ
SEQUENTIAL)
The music
is played
repeatedly on
this mode.
NOTE
• Searching for a section within a track or playing
repeatedly or randomly is not supported on
the AUTO DJ mode.
• If you switch to other functions or stop the
music using STOP on the unit (or
x
on the
remote control) on AUTO DJ mode, AUTO DJ
function will be disable.
• AUTO DJ function is not supported in the
music  le whose length is less than 60
seconds.
• All musics are repeated continuously until the
user deactivates the AUTO DJ function.
Sleep Timer Setting
Press SLEEP one or more times to select delay
time between 10 and 180 minutes, after the
unit turn o .
To cancel the sleep function, press SLEEP
repeatedly until “SLEEP 10” appears, and then
press SLEEP once again while “SLEEP 10” is
displayed.
NOTE
You can check the remaining time before the
unit turns o .
Press SLEEP. The remaining time appears in the
display window.
Dimmer
Press SLEEP once. The display window will be
darken. To cancel it, press SLEEP repeatedly
until dim o .
Turning off the sound
temporarily
Press MUTE to mute your unit.
You can mute your unit in order, for example,
to answer the telephone, the mute icon (
)
is blinked in the display window.
4
Operation
MCT435-AOU-SMEXCLK-ENG.indd 15MCT435-AOU-SMEXCLK-ENG.indd 15 2010.3.11 4:26:31 PM2010.3.11 4:26:31 PM
16 Operation
Operation
4
Setting the Clock
1. Turn the power on.
2. Press CLOCK for at least 2 seconds.
3. Choose from either, by using
|<< or >>|.
- AM 12:00 (for an AM and PM display) or
0:00 (for a 24 hour display)
4. Press SET/ CD
X
for con rm your selection.
5. Select the hours. by using
|<< or >>|.
6. Press SET/ CD
X
.
7. Select the minutes, by using
|<< or >>|.
8. Press SET/ CD
X
.
Using your player as an alarm
clock
1. Turn the power on.
2. Press TIMER. Each functions  ashes.
3. Press SET when the function you want to
be woken by is showing.
4. “ON TIME” will be displayed. This is where
you set the time you want the alarm to
start. Use the |<< or >>| to change the
hours and minutes and SET to save.
5. The “OFF TIME” will be displayed. This is
where you set the time you want the
function to stop.
6. Use the |<< or >>| to change the hours and
minutes and press SET to save.
7. You will be shown the volume (VOL) you
want to be woken by. Use the |<< or >>|
to change the volume and SET to save. The
clock icon
“ ”
shows that the alarm is set.
8. Press TIMER button 2times. You can check
the setting status.
NOTE
• If you set the clock time, you can check the
time by pressing CLOCK even when the player
is turned o .
• If you set the clock time and alarm, you can
check the alarm ico
n “ ” by pressing CLOCK
even when the player is turned o .
• If you set the clock time and alarm, you
can check the alarm i
con “ ” and setting
information by pressing TIMER even when the
unit is turned o .
MCT435-AOU-SMEXCLK-ENG.indd 16MCT435-AOU-SMEXCLK-ENG.indd 16 2010.3.11 4:26:31 PM2010.3.11 4:26:31 PM
17Operation
4
Operation
DEMO
In power o state to demonstrate the function
on display window.
Displaying fi le information
(ID3 TAG )
While playing an MP3  le containing  le
information, you can display the information
by pressing INFO.
Listening to music from your
external device
The unit can be used to play the music from
many types of external device.
(Refer to the 12 page)
1. Connect the external device to the AUX IN
connector of the unit.
2 Turn the power on by pressing
1
/
)
(Power).
3 Select the AUX function by pressing
FUNCTION.
4 Turn the external device on and start it
playing.
MCT435-AOU-SMEXCLK-ENG.indd 17MCT435-AOU-SMEXCLK-ENG.indd 17 2010.3.11 4:26:32 PM2010.3.11 4:26:32 PM
18 Operation
Operation
4
Recording to TAPE
You can record a various sound source to TAPE.
1. Open the tape deck and then insert a blank
tape.
2. Select a function in which you want to
record.
3. Playback a sound source  rst by using
PRESET + > on the unit or
B
/
X
on the
remote control.
4. Press R on the unit or
z
REC on the remote
control.
– The display changed in the following
order, “USB REC” <-> “TAPE REC”
5. Press the R on the unit or
z
REC on the
remote control button once more when
“TAPE REC” is displayed.
– Recording starts.
6. To stop recording, press STOP on the unit
or
x
on the remote control.
Synchronized Recording from
CD to Tape
1. Open the tape deck and then insert a blank
tape.
2. Close the door and insert a CD.
– Audio CD only
3. To select CD function, press CD on the unit
or FUNCTION on the remote control.
4. Press CD SYNC on a stop status to move to
CD synchronizing mode.
– The synchronized recording is started
automatically after about 7 seconds.
5. To stop, press STOP on the unit or
x
on the
remote control.
Recording to USB
You can record a various sound source to USB.
1. Connect the USB device to the unit.
2. Select a function in which you want to
record playback a sound source  rst.
One track recording - You can record to USB
after playing the  le you want.
All tracks recording - You can record to USB
after stopping.
Program list recording - After moving to the
programmed list and you can record it to
USB.
3. Press R on the unit or
z
REC on the remote
control.
– The display changed in the following
order, “USB REC” <-> “TAPE REC”
4. Press the R on the unit or
z
REC on the
remote control button once more when
“USB REC” is displayed.
– Recording starts.
5. To stop recording, press STOP on the unit
or
x
on the remote control.
Pausing recording
During recording, press
z
REC (R) to pause
recording.
Press
z
REC (R) to continue recording.
(Only Radio/ AUX/ TAPE)
MCT435-AOU-SMEXCLK-ENG.indd 18MCT435-AOU-SMEXCLK-ENG.indd 18 2010.3.11 4:26:32 PM2010.3.11 4:26:32 PM
19Operation
4
Operation
To select recording bit rate and speed
1. Press R on the unit or
z
REC on the remote
control for longer than 3 seconds.
2. Use |<< or >>| on the unit or
. m
or
M >
remote control to select the bit
rate.
3. Press R on the unit or
z
REC on the remote
control again to select the recording speed.
4. Use |<< or >>| on the unit or
. m
or
M >
remote control to select a desired
recording speed.
X1 SPEED
- You can listen to music while recording it.
X2 SPEED
- You can just record the music  le.
5. Press R on the unit or
z
REC on the remote
control to  nish the setting.
The making of unauthorized copies of
copy-protected material, including computer
programs,  les, broadcasts and sound recordings,
may be an infringement of copyrights and constitute
a criminal o ense. This equipment should not be
used for such purposes.
Be responsible
Respect copyrights
NOTE
• You can check the recording percentage rate
for the USB record on the display window
during the recording. (MP3/ WMA CD Only)
• During recording MP3/ WMA, there is no
sound.
• When you stop recording during playback, the
le that has been recorded at that time will be
stored. (AUDIO CD Only)
• Do not remove the USB device or turn o the
unit during USB recording.
If not, an incomplete  le may be made and
not deleted on PC.
• If USB recording does not work, the message
like “NO USB”, “ERROR”, “FULL” or “NO REC” is
displayed on the display window.
• For the discs recorded in the format of DTS
disc, USB recording is not supported.
• Multi card reader device or External HDD can
not be used for USB recording.
• A  le is recorded by about 512 Mbyte when
you record for a long term.
• When you stop recording during playback, the
le will not be stored. (MP3/ WMA)
• In the state CD-G, DTS disc USB record is not
operated.
• You may not store more than 999  les.
• The  le number is saved automatically.
• It’ll be stored as follows.
AUDIO CD MP3/ WMA
The other
source
MCT435-AOU-SMEXCLK-ENG.indd 19MCT435-AOU-SMEXCLK-ENG.indd 19 2010.3.11 4:26:32 PM2010.3.11 4:26:32 PM
20 Operation
Operation
4
Setting the surround mode
This system has a number of pre-set surround
sound  elds. You can select a desired sound
mode by using EQ/ LG EQ .
The displayed items for the Equalizer may be
di erent depending on sound sources and
e ects.
On Display Description
NATURAL
You can enjoy comfortable
and natural sound.
Local
Specialization
equalizer
Regionally optimized
sound e ect. (DANGDUT/
ARABIC/ PERSIAN/ INDIA/
REGUETON/ MERENGUE/
SALSA/ SAMBA/ CUMBIA)
AUTO EQ
Realizes the sound equalizer
that is the most similar to the
genre of which is included in
the MP3 ID3 tag of song  les.
POP
CLASSIC
JAZZ
ROCK
This program lends an
enthusiastic atmosphere to
the sound, giving you the
feeling you are at an actual
rock pop, jazz or classic
concert.
MP3 - OPT
This function is optimized
for compressible MP3  le. It
improves the treble sound.
BASS BLAST
Reinforce the treble, bass and
surround sound e ect.
VIRTUAL
You can enjoy more virtual
surround sound.
BYPASS
You can enjoy the sound
with out equalizer e ect.
NOTE
• In some of surround modes, some speakers
maybe no sound or low sound, it depends on
the mode of surround and the source of audio,
it is not defective.
• You may need resetting the surround mode,
after switch the input, sometimes even after
the sound track changed.
• By pressing BASS, MP3 Opt. button on the
unit is directly selected the MP3 - OPT or BASS
BLAST sound.
Setting the USER EQ
You can listen to music with the desired sound
e ect by adjusting the BASS, MIDDLE and
TREBLE.
1. Press USER EQ.
“USER EQ” is displayed.
2. Press SET/ CD
X
to enter the USER EQ.
3. Select the BASS, MIDDLE or TREBLE sound
e ect you want by using < PRESET - /
PRESET + >.
4. Press |<< TUNING -/ TUNING + >>| to
select the sound level you want.
5. To  nish the setting, press SET/ CD
X
.
MCT435-AOU-SMEXCLK-ENG.indd 20MCT435-AOU-SMEXCLK-ENG.indd 20 2010.3.11 4:26:33 PM2010.3.11 4:26:33 PM
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26

LG MCT435-A0U User manual

LG
Brand
LG
Model
MCT435-A0U
Category
CD players
Type
User manual
This manual is also suitable for
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents