BOXLIGHT ProColor 490 Touch Table* Discontinued * Quick start guide

ProColor 490 Touch Table | Quick Start Guide

ASSEMBLY

Assembly process:

1. Turn base upside down and insert the

four wheel assemblies into the four holes

on the underside.

2. Turn the base on its side and attach the

column to the base using the four bolts

and four washers.

3. Stand the base upright and attach the

display to the mounting plate using the four

bolts and four washers.

NOTE: It is strongly recommended to have

two people hold the display safely in place

while a third works from below to insert

the bolts.

Bottom View of Base

Side View of Base

This manual is also suitable for