Volvo 2020 Quick start guide

S90

QUICK GUIDE

VÄLKOMMEN!

This Quick Guide describes a selection of features and functions in your Volvo. Additional owner's information is available in your

vehicle, in an app and on the Internet.

THE CENTER DISPLAY

The Owner's Manual is available in the center display in Top view.

MOBILE APP

The Owner's Manual is available as an app (Volvo Manual) for smart-

phones and tablets. The app also contains instructional videos for cer-

tain functions.

VOLVO'S SUPPORT SITE

Go to Volvo Cars' support site (support.volvocars.com) for manuals

and instructional videos. Additional assistance and information about

your vehicle and owning a Volvo is also available on the support site.

PRINTED INFORMATION

The glove compartment contains a printed supplement to the Own-

er’s Manual containing information about fuses and specifications as

well as a summary of other important and practical information. A

complete printed version of the owner's information (or a new

Owner's Manual supplement) can be ordered.

CONTENT

01. GETTING TO KNOW YOUR VOLVO

This chapter gives you information on some of Volvo's systems and services, and an overview of the inside

and outside, and the center display.

02. INTERIOR AND CONNECTIONS

This chapter provides information about features and functions in the passenger compartment e.g. seat set-

tings and Internet connection.

03. CENTER DISPLAY VIEWS

This chapter contains information about the center display's main views, which control many of the vehicle's

functions.

04. SMART DRIVING

This chapter describes several driver support functions and offers tips on how to drive more economically.

05. VOICE CONTROL

This chapter provides a list of commands/phrases you can use with the voice control system.

06. SUPPLEMENTARY INFORMATION

Warning, caution and note texts, which must be read.

All options and accessories, known at the time of publication, are marked with an asterisk: *.

01

GETTING STARTED

The following functions, concepts and tips are intended to help

familiarize you with your Volvo as quickly as possible.

Volvo ID

Volvo ID is a personal ID that gives you access to a number of ser-

vices with a single username and password. Some examples are

Volvo On Call, navigation* and the opportunity to schedule service

and repairs. You can create a Volvo ID via the Volvo On Call app or

directly in your vehicle.

Sensus

Sensus is your vehicle's intelligent interface and includes all of its

solutions relating to entertainment, connecting to the Internet, nav-

igation* and information services. Sensus enables communication

between you, the vehicle and the digital world around you.

Volvo On Call

Volvo On Call gives you direct contact

1

with your vehicle and

enhanced comfort and assistance 24 hours a day. With the Volvo

On Call app, you can see if e.g. any bulbs need replacing and if

washer fluid needs to be filled. You can lock and unlock the vehicle,

check the fuel level and find your nearest service station. Precondi-

tioning can also be set and started via the vehicle's parking climate

or the engine remote start function

2

. Download the Volvo On Call

app to get started.

Volvo On Call also gives you access to roadside assistance, other

security services and emergency assistance using the ON CALL

and SOS buttons in the ceiling console.

Driver profiles

Many of the vehicle's settings can be adapted to the driver's per-

sonal preferences and saved in one or more driver profiles. Each of

the remote keys can be linked to a driver profile. See the section

"Top view" in this Quick Guide for more information on driver pro-

files.

1

Both the vehicle and the mobile device must have cellular coverage or another Internet con-

nection.

2

Available on certain markets and models.

01

EXTERIOR OVERVIEW

Check and save the new inflation pressure (TPMS)* via

TPMS in the Car Status app in the center display's App view. If

inflation pressure is too low, the

symbol will be steadily illu-

minated in the instrument panel. If inflation pressure is low,

check and adjust the inflation pressure in all four tires and tap

Store Pressure to store the new tire pressure.

The Car Status app is used to check engine oil level. You can

also view any status-related messages and schedule service

and repairs*.

The door mirrors can be automatically* tilted down when

reverse gear is engaged. When the vehicle is locked/unlocked

using the remote key, the door mirrors will automatically fold

in/out. Activate these functions under Settings My Car

Mirrors and Convenience in the center display's Top view.

Keyless locking/unlocking* makes it possible to lock or

unlock the vehicle simply by having a remote key in your pos-

session, e.g. in a pocket. The remote key must be within

approximately 1 meter (3 feet) from the vehicle.

To unlock the vehicle, grasp one of the door handles or press

the rubberized button under the trunk lid's handle. To lock the

vehicle, press one of the indentations on the outside of a door

handle. Avoid touching both the outside and inside of the door

handles at the same time.

The panoramic roof has an opening glass section with a sun

shade and can be operated using a control above the rearview

mirror when the vehicle is in at least ignition mode I. Open to

ventilation position by pressing the control upward and close

by pulling the control downward. To fully open the panoramic

roof, pull the control rearward twice. Close by pulling the con-

trol downward twice.

The power operated trunk lid* can be opened using the foot-

operated trunk lid function* by means of a slow forward kicking

motion under the left-hand part of the rear bumper. Close and

lock the trunk lid by pressing the

button on the lower

edge of the trunk lid. You can also close the tailgate by moving

your foot slowly under the rear bumper. For it to be possible to

open the trunk lid using the foot movement sensor, the vehicle

must be equipped with keyless locking/unlocking*. The remote

key must be within a range of approximately 1 meter (3 feet)

behind the vehicle for foot movement operation to be possible.

01

LOCKINGUNLOCKING

Remote key

Press briefly to lock doors, trunk lid and fuel filler door and arm

the alarm.

A long press closes all side windows simultaneously.

Press briefly to unlock doors, trunk lid and fuel filler door and

disarm the alarm.

Press and hold to open all door windows at the same time.

Press briefly to unlock and disarm only the trunk lid.

Press and hold to open or close the power* trunk lid. On vehi-

cles not equipped with the power trunk release, press and hold

to open the trunk lid mechanically.

The panic alarm activates the turn signals and horn to attract

attention in emergency situations. To activate, press and hold

the button for at least three seconds or press the button twice

within three seconds. The function can be switched off using

the same button after it has been activated for at least five sec-

onds. Otherwise, it will switch off automatically after three

minutes.

Private (valet) locking

Private locking locks the trunk lid and the rear seat backrest, which

can be practical when, for example, the vehicle is taken in for serv-

ice or at a hotel.

–

In the center display's Function view, tap Private

Locking

to activate/deactivate the function.

A pop-up window will appear showing whether the

function is activated or deactivated. A four-digit code

must be selected each time the function is activated.

The first time the function is used, an extra security

code must be selected.

Locking* the glove compartment is performed manually using the

enclosed key which is located inside the glove compartment.

01

INTERIOR OVERVIEW

Center display is used to control many of the vehicle's main

functions, e.g. media, navigation*, climate control, driver sup-

port systems and in-vehicle apps.

The instrument panel displays information about driving, e.g.

speed, rpm, navigation* and active driver support. You can

select which information should be shown in the instrument

panel in the app menu, which is opened using the right-hand

steering wheel keypad. Settings can also be made via

Settings

My Car Displays in the center display's top view.

The head-up display* supplements the vehicle's instrument

panel and projects information on the windshield. It can be

activated in the center display's Function view.

Start knob is used to start the vehicle. Turn clockwise and

release into the ignition position I. Hold the brake pedal

depressed and turn the start knob clockwise to start the vehi-

cle. Switch off the vehicle by turning the start knob clockwise.

Drive modes* are selected using the control in the tunnel con-

sole. The vehicle always starts in Comfort mode. Press in the

control and roll it to select between Comfort, Eco, Dynamic/

Polestar Engineered* and Individual in the center display. Con-

firm by pressing the control. Individual drive mode enables you

to customize a drive mode's characteristics to your preferen-

ces. To activate individual drive mode, tap Settings My Car

Individual Drive Mode in the center display's Top view.

The parking brake is activated by pulling up the control. A

symbol will appear in the instrument panel. Release it manually

by pressing the control down while depressing the brake pedal.

Auto-hold brakes ( ) keep the vehicle stationary when it is

stopped, e.g. at a traffic light, even if the brake pedal is not

depressed.

Before driving the vehicle into a car wash, deactivate the Auto-

matic Braking and Automatic Parking Brake Application func-

tions. Deactivate Automatic Parking Brake Application in the

center display's Top view by tapping

Settings My Car

Parking Brake and Suspension.

Passenger airbag: A sensor system determines what is occu-

pying the front passenger seat and activates/deactivates the

front passenger side's airbag. See the Owner's Manual for

important safety-related information regarding this.

01

CENTER DISPLAY

The center display is used to adjust settings and control most of

the vehicle's functions. The center display has three main views:

home view, function view and app view. You can reach the function

view and app view from the home view by swiping right or left.

There is also a top view that you can access by swiping down from

the top section of the display.

Change the appearance of the center display and the instru-

ment panel by choosing a theme in

Settings My Car

Displays in top view. You can also select a dark or light back-

ground for the center display.

Return to the home view from another view by means of a short

press on the physical home button under the display. The last

mode used for the home view will then be shown. A further short

press on the home button sets all of the home view's tiles in stand-

ard mode.

To clean the center display, press and hold the home button under

the display to lock the touchscreen function. Press the home but-

ton briefly to reactivate the display.

The status bar at the top of the display shows the status of current

vehicle activities and functions. Shown on the left is network and

connection information, with media-related information; the time

and background activity indicator shown on the right.

In the climate row at the bottom you can set temperature and seat

comfort by tapping on the respective icon. Open the climate view

by tapping on the center button in the climate row.

01

POWER* FRONT SEATS

Use the controls on the outside of the seat to adjust e.g. seat posi-

tion and lumbar support*. The two controls that together form the

shape of a seat are used to adjust the seat position. The third, the

multi-function control*, is used to adjust the comfort functions, e.g.

massage*.

The seat-shaped controls

Use the lower section of the control to adjust the height of the seat

cushion or move the entire seat. Use the rear section of the control

to adjust backrest tilt.

The multifunction control

3

Settings for massage*, side bolsters*, lumbar support* and seat

cushion extension* are adjusted using the multifunction control.

1. Turn the multifunction control upward/downward to open the

seat settings window in the center display.

2.Switch between the various functions in the center display by

turning the control upward/downward.

3.Adjust the setting of the selected function by pressing the upper/

lower/front/rear sections of the control.

Storing positions

1.

Adjust the seat, door mirrors and head-up display* to the desired

positions and press the M button on the door panel. The indica-

tor light in the button will illuminate.

2.Press and hold down memory button 1 or 2 within three sec-

onds. An audible signal will sound and the indicator light in the M

button will go out.

To use your stored position:

With door open - press one of the memory buttons and release.

With door closed - press and hold one of the memory buttons until

the seat reaches the stored position.

3

On vehicles with four-way support*.

02

4

It is not possible to lower the rear seat in cars with armrest* which is unlocked and lowered

using a handle.

FOLDING THE BACKRESTS IN THE REAR

SEAT*

Make sure that the backrest and head restraint do not come into

contact with the back of the seat in front when folding down

4

. The

front seats may need to be adjusted in order to fold down the back-

rests.

Folding down the backrests

The vehicle must be stationary and at least one rear door must be

open before a backrest can be folded down.

1. Fold down the center seat's head restraint manually.

2.Press and hold one of the buttons on the parcel shelf on the left

side of the vehicle.

3.The seat will no longer be locked but will remain in the same

position. The head restraints folds down automatically.

4.Fold down the backrest manually to the horizontal position.

Folding up backrests

1. Move the backrest upward/rearward until it locks into position.

2.Return the head restraint to the upright position manually.

3.If needed, adjust the center seat's head restraint.

02

STEERING WHEEL

Adjusting the steering wheel

You can adjust the position of the steering wheel for both height

and depth.

1. Push the lever under the steering wheel forward and adjust the

steering wheel to the desired position.

2.Pull the lever back to the locked position.

Left-side steering wheel keypad

Driver support functions are selected in the instrument panel using

the

and arrow buttons on the left-side steering wheel key-

pad. When the driver support symbol is white, the function is

active. A gray symbol indicates that the function is disabled or in

standby mode.

Symbols in the instrument panel:

Cruise Control helps the driver maintain a set speed.

Adaptive Cruise Control* helps the driver maintain a constant

speed and a set time interval to the vehicle ahead.

Pilot Assist helps keep the vehicle between the traffic lane

markings by providing steering assistance, and helps maintain

a constant speed and a set time interval to the vehicle ahead.

Tap

to start or cancel the selected function.

Tap

/ to increase/decrease the set speed by 5 km/h (5 mph).

Press and hold the button to change the speed in increments.

Release the button when the desired speed is reached.

/ decreases/increases the distance to the vehicle ahead when

using Adaptive Cruise Control and Pilot Assist.

02

Pressing also resumes the stored speed for the selected func-

tion.

Right-side steering wheel keypad

The right-side steering wheel keypad controls the instrument panel.

Open/close the app menu. From here, you can control the trip

computer, media player, a connected cell phone and the navi-

gation system*.

Press the left/right arrows to scroll among the apps.

Select/deselect or confirm a choice, e.g. select the trip com-

puter's menu or erase a message from the instrument panel.

Scroll among a selected app's functions by pressing the up/

down arrows.

Raise/lower the media volume by pressing or . If no other

function is active these buttons serve as volume control.

Voice control is activated by pressing the

button to give voice

commands for e.g. media, navigation and climate systems. Say e.g.

“

Radio”, “Raise temperature” or “Cancel”.

See the chapter "Voice control" in this Quick Guide for additional

voice commands.

Trip computer

The trip computer shows e.g. mileage, fuel consumption and aver-

age speed. You can choose the type of trip computer information

that will be displayed in the instrument panel. The trip computer

calculates the distance that can be driven on the amount of fuel

remaining. Use the buttons on the right-side steering wheel keypad

to display the various options. When “----” is displayed in the

instrument panel, the fuel level is too low to calculate the distance

remaining. Refuel as soon as possible.

02

LEFTSIDE STEERING WHEEL LEVER

Headlight functions are controlled using the left-side steering

wheel lever.

In AUTO mode, the vehicle will automatically monitor lighting con-

ditions and adjust headlight illumination accordingly, e.g. switch

from daytime running lights to low beam when the sun goes down

or when you drive into a tunnel. To switch on the Active High Beam

function, which automatically dims the headlights for approaching

vehicles, turn the lighting ring on the lever to

. Move the lever

toward the steering wheel to activate manual high beams and

toward the dashboard to deactivate.

Active Bending Lights* are designed to follow the movement of

the steering wheel to help provide maximum illumination in turns

and intersections. The function is automatically activated when the

engine is started and can be deactivated in the center display's

Function view,

.

Approach lighting is activated when you unlock the vehicle using

the key and provides illumination to help you approach the vehicle

safely in the dark.

Home Safe Lighting illuminates some of the exterior lights after

the vehicle is locked to provide illumination around the vehicle in

dark conditions. To activate the function, switch off the ignition and

move the left-side steering wheel lever toward the dashboard and

release. The length of time home safe lighting remains illuminated

can be set in the center display.

Resetting the trip odometers

Reset all information in the manual trip odometer (TM) by pressing

and holding the RESET button. Press the button briefly to reset

only the mileage. The automatic trip odometer (TA) resets automat-

ically when the vehicle is switched off for more than 4 hours.

02

RIGHTSIDE STEERING WHEEL LEVER

The right-side steering wheel lever controls the wipers and the rain

sensor.

–

Move the lever downward for a single sweep of the windshield.

–

Move the lever upward in steps for intermittent, normal speed

and high speed.

–

Use the lever's thumb wheel to adjust intermittent wiping speed.

–

Move the lever toward the steering wheel to start the windshield

and headlight washers.

Press the rain sensor button to activate/deactivate the rain

sensor. The windshield wiper lever should be in position 0, or

in the single swipe position. The rain sensor monitors the

amount of water on the windshield and starts the windshield

wipers automatically when needed. Turn the thumb wheel

upward/downward for higher/lower sensitivity.

Use the windshield wipers service position when you e.g.

replace, wash or lift the wiper blade. Tap Wiper Service

Position in the center display's function view to activate or

deactivate service position.

02

Page is loading ...

Volvo 2020 Quick start guide

This manual is also suitable for

Volvo 2020 Quick start guide

Related papers