Grizzly T31616 Owner's manual

Brand: Grizzly

Model: T31616

Type: Owner's manual

For questions or help with this product contact Tech Support at (570) 546-9663 or techsupport@grizzly.com

MODEL T31616

VARIABLE-SPEED

AIR MOVER

INSTRUCTIONS

Introduction

This variable-speed air mover offers two built-in

outlets to connect multiple units, and sits in four

different positions for ease of placement.

WARNING: NO PORTION OF THIS MANUAL MAY BE REPRODUCED IN ANY SHAPE

OR FORM WITHOUT THE WRITTEN APPROVAL OF GRIZZLY INDUSTRIAL, INC.

#CS20628 PRINTED IN CHINA

V1.09.19

Specifications

• Motor ......................... 120V, 1-Ph, 60 Hz, 1A

• Maximum Total Current Rating ............... 15A

• Speed ................................... 900-1500 RPM

• Maximum Airflow ........................... 300 CFM

Operation

Figure 1. Air circulation.

Air Inlet

(1 of 2)

Air Outlet

1. Place air mover at desired position with air

inlets and outlet unobstructed and on a level

surface (see Figure 1).

Make sure variable-speed dial is OFF (see

Figure 2), then plug into a GFCI-protected

outlet.

Figure 2. Power components.

Variable-Speed

Dial

Power

Cord

120 VAC Outlet

(1 of 2)

• To avoid electric shock, do not handle

plug or machine with wet hands and do

not expose to rain or place directly in wet

area.

• Disconnect power before servicing,

cleaning, or when machine is not in use.

• Only plug power cord into a grounded

outlet.

• Keep hair, loose clothing away from fan.

• Do not modify machine in any way.

• Do not use if cord/plug becomes dam-

aged—only replace with Ground Fault

Circuit Interrupter plug (GFCI).

• Do not run cord under carpeting or where

it may be tripped over.

• Not meant for outdoor use.

• To avoid fire, do not use in area with

flammable or combustible liquids/fumes.

• Prevent unauthorized use by children or

untrained users.

-2-

T31616 Variable-Speed Air Mover (Mfd. 9/19+)

3. Turn speed dial to desired speed setting to

turn air mover ON.

Note: If air mover stops operating while still

connected to power and with speed dial

turned ON, circuit overload may be tripped.

To reset, make sure air mover is dry, vents

are unobstructed, and that it is not overheat-

ing, then press reset button (see Figure 3).

Follow Steps 1–3 to connect additional air

mover devices to two built-in outlets (see

Figure 2). Disconnect from power when not

in use.

Note: Do not exceed 12A of current draw

between two built-in outlets, i.e., 6A max. is

limit for each receptacle.

Reset

Button

Figure 3. Reset button location.

Grizzly T31616 Owner's manual

Grizzly T31616 Owner's manual

Grizzly T31616 Owner's manual

Related papers

Other documents