2. Charbroil
  3. Quickset Traditional 463731704
Quickset Traditional 463731704

Charbroil Quickset Traditional 463731704, 463731704 Owner's manual

  • Hello! I am an AI chatbot trained to assist you with the Charbroil Quickset Traditional 463731704 Owner's manual. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
THIS GRILL IS FOR
OUTDOOR USE ONLY
Failure to follow all manufacturer’s
instructions could result in serious
personal injury and/or property
damage.
WARNING
!
CAUTION
!
Some parts may contain sharp edges
– especially as noted in the manual!
Wear protective gloves if necessary.
CAUTION:
INSTALLER/ASSEMBLER:
CONSUMER:
Read and follow all safety
statements, assembly instructions,
and use and care directions before
attempting to assemble and cook.
Leave
these instructions with consumer.
Keep this manual for
future reference.
463731704
ASSEMBLY MANUAL
463731704 / 4165333 (11-26-03) - 1
Parts List - Model 463731704
Key Qty. Description Part #
A 1 Grease Cup .................4150349
C 1 Wire Shelf ..................4151033
D 1 Warming Rack ...............4152124
E 1 Cooking Grate ...............4152739
F 1 Side Shelf...................4154279
G 1 Handle .....................4154488
H 1 Sideburner Grate .............4156376
I 1 LPGasTank.................4158015
J 2 Wheel Assembly .............4310002
K 1 Sideburner Body .............4310004
L 1 V-Bar ......................4500290
M 1 Heat Shield .................4500305
N 1 Sideburner Frame ............4501705
O 2 Leg Assembly................4502378
P 1 Bottom Shelf ................4502379
Q 1 Front Panel .................4502383
R 4 #10x1/2”, T-20, Self-Tap Screw . . 4080043
S 2 Valve Clip ...................4151043
T 1 Burner/Collector Assembly......4505084
B 1 Tank Wire Support Bracket .....4151019
Key Qty. Description Part #
U 1 Control Panel Assembly........4530177
V 1 Sideburner Valve Cup .........4154476
W 1 Sideburner Ignitor Wire ........5156109
X 1 Grill Bottom .................4580538
Y 1 Grill Lid.....................4581022
Z 2 Control Knob ................4154470
AA 1 Sideburner Knob .............4154471
BB 2 Leg Extender ................4154577
CC 1 Logo Plate ..................4157147
DD 1 Sideburner Burner ............5068018
EE 1 Grease Clip .................5156607
- - 1 Hardware, Cart...............4254080
- - 1 Hardware, Shelf ..............4254005
- - 1 Hardware, Sideburner .........4254051
If you have any questions or need
assistance during assembly, please
call 1-800-241-7548.
Visit us on the web at:
www.charbroil.com
Optional Assembly Hardware
Optional hex nuts
We realize some customers prefer to use tools.
have been provided for you to use.
COLUMBUS, GA
A
B
C
D
E
F
G
H
I
J
K
L
M
N
O
P
Q
R
S
T
U
V
W
X
Y
Z
AA
BB
CC
DD
EE
O
R
R
R
U
Items to Assemble:
1 V-Bar
Push V-Bar down onto
rest in Grill Bottom
Hinge Pin
and Hitch Pin
Qty: 2
Qty: 2
Qty:2
Items to Assemble:
1 Grill Lid
2 Hinge Pins
2 Hitch Pins
1 Handle
2 Wing Nuts
1 Logo Plate
Note: Grill lid
style may vary.
Back of GrillBack
of
Grill
Grease Clip
Grease Cup
See Use & Care Manual for “Match Lighting Instructions” and to
perform the Burner Flame Check” and important safety
instructions before using.
Items to Assemble:
1 Shelf
4 Crown Nuts or Wing Nuts
4 Carriage Bolts
Qty: 4
Qty: 4
463731704
Correct position of LP tank
and tank wire support
bracket after grill assembly
10
Items to Assemble:
1 Grease Clip
1 Grease Cup
1 Tank Wire Support Bracket
1 LP Tank
LP tank is shipped empty. Fill and leak check before
attaching to grill and regulator.
CAUTION
!
• Failure to install can in clip will cause hot grease
to drip from bottom of grill with risk of fire or
property damage.
• Tank collar opening must face to front of cart
once tank is attached.
• Failure to install tank correctly may allow gas
hose to be damaged in operation, resulting in
the risk of fire.
Item to Assemble:
1 Wire Shelf
1 Panel
2 Push Pins
Qty: 2
A
B
Place Wire Shelf in 3rd hole from top.
Assemble front panel first by
placing tabs into slots on Bottom Shelf.
Attach with push pins.
A
B
Items to Assemble:
1 Grill Bottom
1 Heat Shield
2 Carriage Bolts
2 Wing Nuts
2 Control Knobs
Qty. 2
Qty.2
Qty: 2
Items to Assemble:
2 Wheel Assemblies
2 Hitch Pins
2 Leg Extenders
Items to Assemble:
2 Leg Assemblies
1 Bottom Shelf
6 Carriage Bolts
6 Wing Nuts
Qty: 6
Qty: 6
Place Bottom Shelf and Legs as shown.
After assembling tighten all Wing Nuts.
Right Side:
Attach 2 Carriage Bolts and Wing Nuts in
front and back.
Left Side:
Place 1 Carriage Bolt
and Wing Nut in upper hole only
Attach Wheels with Hitch Pins
6
5
4
9
3
8
2
7
1
Qty: 1
Qty: 1
A
Items to Assemble:
1 Sideburner
1 Wing Nut
1 Sideburner Valve Cup
1 Sideburner Knob
1 Sideburner Grate
1 Sideburner Wire
A
B
C
Place Sideburner into hole.
Attach Sideburner Valve Cup. Make sure
Sideburner Tube is inside of valve. Tighten
with Wing Nut.
Place Sideburner Knob and Grate
Correctly assembled Sideburner Tube in Valve
B
C
Attach long wire from beneath console
to electrode beneath Sideburner.
D
D
Leg wires on Warming Rack
must run underneath surface.
A
B
Items to Assemble:
1 Warming Rack
1 Cooking Grate
A
B
Insert pivot wire of Warming Rack into Lid. Flex leg
wires to insert into Grill Bottom.
Place Cooking Grate into Grill Bottom.
11
Hang grease clip from center of grill bottom.
Use the grease cup to hang from grease clip.
Items to Assemble:
1 Sideburner Body
1 Sideburner Frame
1 Carriage Bolt
1 Wing Nut
1 Crown Screw or Wing Screw
Qty: 1
Qty: 1
or
Join Sideburner Body and Frame. Attach with Carriage Bolt and Wing Nut in back center hole.
In front use a Crown Screw or Wing Screw to attach Sideburner Body.
12
Qty: 4
/