Fujitsu Primergy BX620 S3 System Configuration And Order-Information Manual

Brand: Fujitsu

Model: Primergy BX620 S3

Type: System Configuration And Order-Information Manual

This manual is also suitable for

Primergy BX620 S2

Fujitsu Primergy BX620 S3 is a dual-processor blade server designed for demanding workloads. It supports up to 12 GB of memory and features a variety of storage options, including support for 10krpm and 15krpm SAS hard drives. The BX620 S3 also includes a number of built-in features, such as a hardware RAID controller, dual Gigabit Ethernet ports, and a dedicated management port. This makes it an ideal choice for businesses that need a powerful and reliable server for their critical applications.

stem Confi

uration and Order-information Guide

BX620 S2/BX620 S3

October 2006

Front View

Back View

PRIMERGY BX620 S2 / BX620 S3

PRIMERGY BX620 S2

View

PRIMERGY BX600 S2 Blade Server System Unit

Expansion Board slot

CPU

DIMM Slot

Hard Disk Bay

PRIMERGY BX620 S2

Switch Blade (optional) /

GbE Pass-Thru Blade (optional)

FC Switch Blade (optional) /

FC Pass-Thru Blade (optional) /

Switch Blade (optional) /

GbE Pass-Thru Blade (optional)

Keyboard / Mouse /

Display

Power Supply (optional)

Power Su

Management Blade

Mana

ement LAN

Mana

ement Console Board

PRIMERGY BX620 S3

View

Expansion Board slot

DIMM Slot

CPU

Hard Disk Bay

PRIMERGY BX620 S3

This document contains basic product and configuration information that will enable you

to configure your system.

Only these tools will ensure a fast and proper configuration of your PRIMERGY server

or your complete PRIMERGY Rack system.

You can configure your individual PRIMERGY server in order to meet your specific

requirements.

Please follow the lines. If there is a junction, you can choose which way or component

you would like to take.

Go through the configurator by following the lines from the top to the bottom.

The color of the junction means as follows.

Key to

Instruction

PRIMERGY BX620 S2 / BX620 S3

Dual-Processor Blade Server

Base Unit Xeon® 3EGHz/2MB, 1GB

PGUX6221A

CPU Frequencies 64-bit Intel® Xeon® 3.80GHz *5 / 3.40EGHz *6 / 3.20EGHz *7 / 3EGHz

Second-Level-Cache 2MB

Multi-Processor max. 2 (1 for standard)

Front-Side-Bus 800MHz

Chipset Intel® E7520

Memory Standard 1GB (512MB ECC DDR2 SDRAM DIMM x 2) (SDDC(Single Device Data Correction) supported)

Maximum *1 12GB (2GB ECC DDR2 SDRAM DIMM x 6)

Graphics Controller ATI RADEON 7000M , VRAM : 16MB (PCI)

Resolution *2 640x480/800x600/1024x768/1280x1024 dot

Internal Bays Number of bays 2

3.5 inch Available HDD *3 73.4GB (PG-HDH71K) 10krpm, U320 SCSI

HDD 146.8GB (PG-HDH41K) 10krpm, U320 SCSI

300.0GB (PG-HDH31K) 10krpm, U320 SCSI

73.4GB (PG-HDH75K) 15krpm, U320 SCSI

146.8GB (PG-HDH45V) 15krpm, U320 SCSI

Standard -

Maximum *3 600.0GB

PCI Slots PCI-X (64bit/133MHz) [3.3V] optional

( 1 by applying Expansion Card Slot Module

* internal 3.5 inch Bay x 1 is occupied )

RAID Controller Onboard

SCSI Controller Onboard, Ultra320 SCSI x 1ch (with RAID1 function)

LAN Interfaces 2ports (1Gbps) ( 4ports (1Gbps) when 1Gbit/s Ethernet I/O Module (PG-LND101) (2ports(1Gbps)) is applied. ) *8

Fibre channel Interfaces optional ( 2ports (2Gbps) when 2Gbit/s FC I/O Module (PG-FCD102) (2ports(2Gbps)) is applied. ) *9

Interfaces Display (Analog RGB), USB x2(ver. 2.0), Display *10, Keyboard *10, Mouse *10

Server Management Software ServerView (standard) *11

Power supply Voltage DC12V / DC5V-Standby (provided by BX600 S2 Blade Server System Unit)

Power consumption 330W / 1188kJ/h (max.)

Dimensions (W x D x H (mm) ) 42 x 476 x 286 ( Server blade slot of BX600 S2 Blade Server System Unit x 1)

Weight 7.0kg (max.)

Environmental Conditions Temperature10-35°C / Humidity 20-80% (non condensing)

OS Support *4 Windows Server

2003 R2, Standard Edition / Windows Server

2003 R2, Enterprise Edition

Windows Server

2003, Standard Edition / Windows Server

2003, Enterprise Edition

Windows Server

2003 R2, Standard x64 Edition / Windows Server

2003 R2, Enterprise x64 Edition

Windows Server

2003, Standard x64 Edition / Windows Server

2003, Enterprise x64 Edition

Windows® 2000 Server (SP4) / Windows® 2000 Advanced Server (SP4)

Red Hat Enterprise Linux AS (v.3 for x86) / Red Hat Enterprise Linux ES (v.3 for x86)

Red Hat Enterprise Linux AS (v.4 for x86) / Red Hat Enterprise Linux ES (v.4 for x86)

Red Hat Enterprise Linux ES (v.4 for EM64T)

Attached tool (Standard) ServerStart (Setup Support tool) *12

*1.Available memory capacity will be changed by the type of OS. Please find more details in Notes[Memory OS Compatibility List].

*2. Resolution is determined by functions of the display monitor and OS.

*3. HDD capacity is calculated according to the formula 1GB=1000

byte

*4. Drivers for Linux are not attached. Please download and use drivers of the following URL.

http://www.fujitsu.com/global/services/computing/server/ia/driver/

*5. CPU Conversion kit: Xeon(3.0GHz/2MB) -> Xeon(3.8GHz/2MB)(PGBFU36D) is available for upgrading

to Intel® Xeon

3.80GHz.

*6. CPU Conversion kit: Xeon(3.0GHz/2MB) -> Xeon(3.4GHz/2MB)(PGBFU36C) is available for upgrading

to Intel® Xeon® 3.40EGHz.

*7. CPU Conversion kit: Xeon(3.0GHz/2MB) -> Xeon(3.2GHz/2MB)(PGBFU263) is available for upgrading

to Intel® Xeon® 3.20EGHz.

*8. 1Gbit/s Ethernet I/O Module (PG-LND101) is available when Switch Blade (PG-SW104/PG-SW105) or GbE Pass-Thru Blade (PG-LNB101)

are mounted on Network Blade Slot 3,4 of BX600 S2 Blade Server System Unit (PGUR3SC1).

BX620 S2 / BX620 S3 with 1Gbit/s Ethernet I/O Module (PG-LND101) and BX620 S2 / BX620 S3 with 2Gbit/s FC I/O Module (PG-FCD102)

are not allowed to be mounted together on same BX600 S2 Blade Server System Unit (PGUR3SC1).

*9. 2Gbit/s FC I/O Module (PG-FCD102) is available when FC Switch Blade (PG-FCS102) or FC Pass-Thru Blade (PG-FCB101)

are mounted on Network Blade Slot 3,4 of BX600 S2 Blade Server System Unit (PGUR3SC1).

BX620 S2 / BX620 S3 with 1Gbit/s Ethernet I/O Module (PG-LND101) and BX620 S2 / BX620 S3 with 2Gbit/s FC I/O Module (PG-FCD102)

are not allowed to be mounted together on same BX600 S2 Blade Server System Unit (PGUR3SC1).

*10. These are connected to KVM Module (standard) or KVM module (PG-KVB101) (optional) in BX600 S2 Blade Server System Unit (PGUR3SC1).

*11. If you use Windows Server

2003 R2 / Windows Server

2003 R2 x64 Editions, please download and use ServerView of the following URL.

http://www.fujitsu.com/global/services/computing/server/ia/driver/

*12. ServerStart doesn't support Linux.

Type

PRIMERGY BX620 S2

Data Sheet

PRIMERGY BX620 S2 / BX620 S3

*1. When 2Gbit/s FC I/O Module (PG-FCD102) is mounted on Expansion Board Slot of BX620 S2, FC Switch Blade (PG-FCS102) or FC Pass-Thru Blade (PG-FCB101)

is required to be mounted on Network Blade Slot 3,4 of BX600 S2 Blade Server System Unit (PGUR3SC1).

BX620 S2 / BX620 S3 with 1Gbit/s Ethernet I/O Module (PG-LND101) and BX620 S2 / BX620 S3 with 2Gbit/s FC I/O Module (PG-FCD102)

are not allowed to be mounted together on same BX600 S2 Blade Server System Unit (PGUR3SC1).

*2. When 1Gbit/s Ethernet I/O Module (PG-LND101) is mounted on Expansion Board Slot of BX620 S2, Switch Blade (PG-SW104/PG-SW105) or GbE Pass-Thru Blade (PG-LNB101)

is required to be mounted on Network Blade Slot 3,4 of BX600 S2 Blade Server System Unit (PGUR3SC1).

BX620 S2 / BX620 S3 with 1Gbit/s Ethernet I/O Module (PG-LND101) and BX620 S2 / BX620 S3 with 2Gbit/s FC I/O Module (PG-FCD102)

are not allowed to be mounted together on same BX600 S2 Blade Server System Unit (PGUR3SC1).

*3. When Expansion Card Slot Module (PG-CS102) is mounted, HDD can not be mouted on 3.5 inch HDD Bay 2.

*Components installed as standard configuration marked in grey.

Eth. Ctrl 2x1000-BASE-T Cu PG-1862

PCI-X/64bit

SCSI Ctrl U160 PG-128

PCI/64bit

For PRIMERGY SX10

*. PCI card (Eth. Ctrl 2x1000-BASE-T Cu(PG-1862),SCSI Ctrl U160(PG-128)) should be mounted on Expansion Card Slot Module(PG-CS102).

The slot of mounted PCI card is at front side of BX600 S2 Blade Server System Unit (PGUR3SC1).

The cable connected to PCI card can be gone from front side to back side of BX600 S2 Blade Server System Unit (PGUR3SC1)

by using Front-Rear Cable-Thru kit (PG-R1CM1).

Front-Rear Cable-Thru kit (PG-R1CM1) is mounted just under BX620 S2 and occupies 1U.

Max: 2 CPU Processor Xeon 3.8GHz/2MB

PG-FG36D

Standard: 1 CPU PGBFG36D (for CTO)

*. This option is available when CPU Conversion Kit:

Xeon(3.0GHz/2MB) -> Xeon(3.8GHz/2MB) (PGBFU36D) is applied.

Processor Xeon 3.4GHz/2MB

PG-FG36C

PGBFG36C (for CTO)

*. This option is available when CPU Conversion Kit:

Xeon(3.0GHz/2MB) -> Xeon(3.4GHz/2MB) (PGBFU36C) is applied.

Processor Xeon 3.2GHz/2MB

PG-FG263

PGBFG263 (for CTO)

*. This option is available when CPU Conversion Kit:

Xeon(3.0GHz/2MB) -> Xeon(3.2GHz/2MB) (PGBFU263) is applied.

Processor Xeon 3.0GHz/2MB

PG-FG262

PGBFG262 (for CTO)

*. This option is available when the processor of the base unit

is Processor Xeon 3.0GHz/2MB.

*CPU Conversion Kit (available only for a Configure to Order (CTO) option; no separate shipment is possible)

CPU Conversion Kit: 64-bit Intel® Xeon® 3EGHz -> 64-bit Intel® Xeon® 3.80GHz

Xeon (3.0GHz/2MB) Convert the CPU installed as standard in the base unit to the other.

-> Xeon(3.8GHz/2MB) (Note: This option can be ordered only as coupled with the base unit.

(for CTO) A separate shipment is not possible.)

CPU Conversion Kit: 64-bit Intel® Xeon® 3EGHz -> 64-bit Intel® Xeon® 3.40EGHz

Xeon (3.0GHz/2MB) Convert the CPU installed as standard in the base unit to the other.

-> Xeon(3.4GHz/2MB) (Note: This option can be ordered only as coupled with the base unit.

(for CTO) A separate shipment is not possible.)

CPU Conversion Kit: 64-bit Intel® Xeon® 3EGHz -> 64-bit Intel® Xeon® 3.20EGHz

Xeon (3.0GHz/2MB) Convert the CPU installed as standard in the base unit to the other.

-> Xeon(3.2GHz/2MB) (Note: This option can be ordered only as coupled with the base unit.

(for CTO) A separate shipment is not possible.)

Bus

Type Product ID

PGBFU36D

PGBFU36C

PGBFU263

Remarks

Max No.

of Mount

Mountable Cards

PRIMERGY BX620 S2

Configuration Diagram

Expansion Board Slot *1,*2

Memory

DIMM Slot 1

DIMM Slot 2

DIMM Slot 3

DIMM Slot 4

DIMM Slot 5

DIMM Slot 6

CPU

Xeon®

3.80/3.40E/

3.20E/3EGHz

(2MB)

Xeon®

3.80/3.40E/

3.20E/3EGHz

(2MB)

3.5 inch HDD Bay 1

(hot plug)

3.5 inch HDD Bay 2

(hot plug) *3

Hard Disk 3.5inch Bay (hot plug)

Standard Drive Ca

(

HDD x 1ch

)

Bay 2

SCSI

Mountable I/O Options

Connection Table

CPU

CPU Slot

PRIMERGY BX620 S2 / BX620 S3

BX620 S2 ( In case that Expansion Card Slot Module (PG-CS102) is applied. )

Bay 1

SCSI

Max: 12GB (2GB DIMM x 6) Memory Module-1GB (512MB DIMM x 2)

PG-RM1BC

Standard Memory Module: 1GB (512MB DIMM x 2)

Memory Module-2GB (1GB DIMM x 2)

PG-RM2BC

Memory Module-4GB (2GB DIMM x 2)

PG-RM4BC

Memory Module Conversion kit (for CTO) Memory Module Conversion kit-2GB (1GB DIMM x 2)

PGBRU2BC (for CTO)

Memory Module Conversion kit-4GB (2GB DIMM x 2)

PGBRU4BC (for CTO)

*. Notes on installing memory

1. Memory is installed by pairs of DIMMs of the same capacity. Installation of one DIMM or a mixed-capacity pair is impossible.

2. The memory capacities of the slots should be in ascending order in the following sequence:

DIMM slots 1,2 (Bank0) -> DIMM slots 3,4 (Bank1) -> DIMM slots 5,6 (Bank2)

(Available Memory Area)

*1 : "1.0GB" is being used for PCI resource management

Same as the size of mounted memory

Size of Mounted Memory minus "1.0GB"(*1)

Same as the size of mounted memory

Size of Mounted Memory minus "1.0GB"(*1)

Same as the size of mounted memory

Max: 2 HDDs HDD U320 10k 73GB hot plug 1"

PG-HDH71K

PGBHDH71K (for CTO)

HDD U320 10k 147GB hot plug 1"

PG-HDH41K

PGBHDH41K (for CTO)

HDD U320 10k 300GB hot plug 1"

PG-HDH31K

PGBHDH31K (for CTO)

HDD U320 15k 73GB hot plug 1"

PG-HDH75K

PGBHDH75K (for CTO)

HDD U320 15k 147GB hot plug 1"

PG-HDH45V

PGBHDH45V (for CTO)

～8.0GB

Windows® 2000 Server (SP4) /

Windows Server

2003, Standard Edition /

Windows Server

2003 R2, Standard Edition

Mounted Memory Available Memory Area

～12.0GB

～3.0GB

4.0GB

～7.0GB

8.0GB

Windows® 2000 Advanced Server

Windows Server

2003 x64 Editions /

Windows Server

2003 R2 x64 Editions

Other OS

Memory

Slot

PRIMERGY BX620 S2

Connecting Internal HDD and Internal Backup Devices

Internal HDD

Onboard SCSI

Controller (Wide)

Memory

Slot

PRIMERGY BX620 S2 / BX620 S3

SCSI/RAID Configuration

*. Spare Memory function

In case of using Spare Memory function, same DIMMs

of more than two banks are required to be installed.

Available memory capacity is "installed memory" minus

"capacity of one bank".

Max: 1

Twist Pair Cable (category 5e)

Expansion Card Slot Module Eth. Ctrl 2x 1000-BASE-T Cu

PG-CS102 PG-1862

*Dual port

SCSI Ctrl U160 SCSI Cable HDCI 1.5m PRIMERGY SX10

PG-128 PG-CBLS001 PG-R1BC4

SCSI Cable HDCI 5m

PG-CBLS002

In case that Expansion Card Slot Module (PG-CS102) is mounted on BX620 S2, and PCI card is monted on Expansion Card Slot Module,

the slot of mounted PCI card is at front side of BX600 S2 Blade Server System Unit (PGUR3SC1).

The cable connected to PCI card can be gone from front side to back side of BX600 S2 Blade Server System Unit (PGUR3SC1)

by using Front-Rear Cable-Thru kit (PG-R1CM1).

Front-Rear Cable-Thru kit (PG-R1CM1) is mounted just under BX620 S2 and occupies 1U.

Front-Rear Cable-Thru kit

PG-R1CM1

Switch Blade /

GbE Pass-Thru Blade

Max: 1 1Gbit/s Ethernet I/O Module

PG-LND101 Switch Blade /

PGBLND101 (for CTO) GbE Pass-Thru Blade

2Gbit/s FC I/O Module

PG-FCD102 FC Switch Blade /

PGBFCD102 (for CTO) FC Pass-Thru Blade

LAN Card/Internal backup device (PRIMERGY SX10)

PRIMERGY BX620 S2

Expansion Card

Slot Module

onnecto

On-board LAN

Interface

LAN/Fibre Channel Interface

Expansion

Board Slot

PRIMERGY BX620 S2 / BX620 S3

Notes on applying Expansion Card Slot Module (PG-CS102)

Dual-Processor Blade Server

Base Unit Xeon® 5050 (3GHz)

PGUX6231A

CPU Frequencies Dual Core Intel® Xeon® 5080 (3.73GHz) *5 / 5060 (3.20GHz) *6 / 5050 (3GHz)

Second-Level-Cache 2 x 2MB

Multi-Processor max. 2 (1 for standard)

Front-Side-Bus

Chipset Intel® 5000P

Memory Standard 1GB (512MB ECC DDR2 SDRAM Fully Buffered DIMM x 2) (SDDC(Single Device Data Correction) supported)

Maximum *1 16GB (2GB ECC DDR2 SDRAM Fully Buffered DIMM x 8)

Graphics Controller ATI ES 1000 , VRAM : 16MB (PCI)

Resolution *2 640x480/800x600/1024x768/1280x1024 dot

Internal Bays Number of bays 2

2.5 inch Available HDD *3 36.7GB (PG-HDD61A) 10krpm, SAS

HDD 73.4GB (PG-HDD71A) 10krpm, SAS

Standard -

Maximum *3 146.8GB

PCI Slots

PCI Express (x4) [x4]

PCI-X (64bit/133MHz) [3.3V]

RAID Controller Onboard

SAS Controller Onboard, SAS x 2ports (with RAID1 function)

LAN Interfaces 2ports (1Gbps) ( 4ports (1Gbps) when 1Gbit/s Ethernet I/O Module (PG-LND101) (2ports(1Gbps)) is applied. ) *7

Fibre channel Interfaces optional ( 2ports (2Gbps) when 2Gbit/s FC I/O Module (PG-FCD102) (2ports(2Gbps)) is applied. ) *8

Interfaces Display (Analog RGB), USB x2(ver. 2.0), Display *9, Keyboard *9, Mouse *9

Server Management Software ServerView (standard)

Power supply Voltage DC12V / DC5V-Standby (provided by BX600 S2 Blade Server System Unit)

Power consumption 405W / 1458kJ/h (max.)

Dimensions (W x D x H (mm) ) 42 x 476 x 286 ( Server blade slot of BX600 S2 Blade Server System Unit x 1)

Weight 7.0kg (max.)

Environmental Conditions Temperature10-35°C / Humidity 20-80% (non condensing)

OS Support *4 Windows Server

2003 R2, Standard Edition / Windows Server

2003 R2, Enterprise Edition

Windows Server

2003, Standard Edition (SP1) / Windows Server

2003, Enterprise Edition (SP1)

Windows Server

2003 R2, Standard x64 Edition / Windows Server

2003 R2, Enterprise x64 Edition

Windows Server

2003, Standard x64 Edition / Windows Server

2003, Enterprise x64 Edition

Windows® 2000 Server (SP4) / Windows® 2000 Advanced Server (SP4)

Red Hat Enterprise Linux AS (v.3 for x86) / Red Hat Enterprise Linux ES (v.3 for x86)

Red Hat Enterprise Linux AS (v.4 for x86) / Red Hat Enterprise Linux ES (v.4 for x86)

Red Hat Enterprise Linux AS (v.4 for EM64T) / Red Hat Enterprise Linux ES (v.4 for EM64T)

Attached tool (Standard) ServerStart (Setup Support tool) *10

*1.Available memory capacity will be changed by the type of OS. Please find more details in Notes[Memory OS Compatibility List].

*2. Resolution is determined by functions of the display monitor and OS.

*3. HDD capacity is calculated according to the formula 1GB=1000

byte

*4. Drivers for Linux are not attached. Please download and use drivers of the following URL.

http://www.fujitsu.com/global/services/computing/server/ia/driver/

*5. CPU Conversion kit: Xeon 5050(3GHz/2x2MB) -> Xeon 5080(3.73GHz/2x2MB) (PGBFU33P) is available for upgrading

to Intel® Xeon® 5080 (3.73GHz).

*6. CPU Conversion kit: Xeon 5050(3GHz/2x2MB) -> Xeon 5060(3.2GHz/2x2MB) (PGBFU33N) is available for upgrading

to Intel® Xeon® 5060 (3.20GHz).

*7. 1Gbit/s Ethernet I/O Module (PG-LND101) is available when Switch Blade (PG-SW104/PG-SW105) or GbE Pass-Thru Blade (PG-LNB101)

are mounted on Network Blade Slot 3,4 of BX600 S2 Blade Server System Unit (PGUR3SC1).

BX620 S2 / BX620 S3 with 1Gbit/s Ethernet I/O Module (PG-LND101) and BX620 S2 / BX620 S3 with 2Gbit/s FC I/O Module (PG-FCD102)

are not allowed to be mounted together on same BX600 S2 Blade Server System Unit (PGUR3SC1).

*8. 2Gbit/s FC I/O Module (PG-FCD102) is available when FC Switch Blade (PG-FCS102) or FC Pass-Thru Blade (PG-FCB101)

are mounted on Network Blade Slot 3,4 of BX600 S2 Blade Server System Unit (PGUR3SC1).

BX620 S2 / BX620 S3 with 1Gbit/s Ethernet I/O Module (PG-LND101) and BX620 S2 / BX620 S3 with 2Gbit/s FC I/O Module (PG-FCD102)

are not allowed to be mounted together on same BX600 S2 Blade Server System Unit (PGUR3SC1).

*9. These are connected to KVM Module (standard) or KVM module (PG-KVB101) (optional) in BX600 S2 Blade Server System Unit (PGUR3SC1).

*10. ServerStart doesn't support Linux.

1066MHz ( Dual Core Intel® Xeon® 5080 (3.73GHz) / 5060 (3.20GHz) ) /

667MHz ( Dual Core Intel® Xeon® 5050 (3GHz) )

optional (1 : LowProfile PCI Express Card only when Expansion Card Slot Module (PGBCS104) is applied.)

optional (1 : LowProfile PCI Card only when Expansion Card Slot Module (PGBCS103) is applied.)

Type

PRIMERGY BX620 S3

Data Sheet

PRIMERGY BX620 S2 / BX620 S3