Haier HLP22P - 06-03 User manual
- Category
- Washing machines
- Type
- User manual
This manual is also suitable for
Automatic
Washing Machine
W
A
S
H
R
I
N
S
E
S
P
I
N
T
E
M
P
W
A
S
H
/
R
I
N
S
E
W
A
T
E
R
L
E
V
E
L
R
E
S
E
R
V
E
P
R
O
G
R
A
M
S
T
A
R
T
P
A
U
S
E
P
O
W
E
R
O
N
/
O
F
F
User Manual-
Model #
HLP22P
®
What The World Comes Home To
TM
Lavarropas
Automático
Lave-Linge
Automatique
Manuel d’utilisation-
Modèle #
Manual de uso-
Modelo #
IMPORTANT SAFETY INSTRUCTIONS
Warning – To reduce the risk of fire, electric shock, or injury
to persons when using your appliance, follow basic
precautions, including the following:
1. Read all instructions before using the appliance.
2. Use this appliance only for its intended purpose as described in this use and
care guide.
3. Use only detergents or softeners as recommended for use in this manual and
keep them out of the reach of children.
4. This appliance must be properly installed in accordance with the installation
instructions before it is used.
5. Never unplug your appliance by pulling on the power cord. Always grasp the
plug firmly and pull straight out from the outlet.
6. Replace immediately any worn power cords, loose plugs and power outlets.
7. Unplug your appliance before cleaning or before making any repairs.
8. If your old appliance is not being used, we recommend that you remove the
door. This will reduce the possibility of danger to children.
9. Do not operate your appliance in the presence of explosive fumes.
10. Do not use this appliance to wash clothes that have been soaked, spotted or
washed in gasoline, dry cleaning solvents or any other explosive or flammable
substances that may ignite and explode.
11. Clothes or rags used to clean flammable or explosive materials should not be
washed in this appliance until all traces of this material have been removed.
12. Do not add or mix any flammable or explosive substances to the wash.
13. Do not try to remove clothes while the tub is moving. Allow it come to a
complete stop before reaching in.
14. The appliance’s loading door must be closed when the tub is spinning.
15. Do not operate your appliance when parts are missing or broken.
16. Do not use this appliance for commercial uses.
17. Do not operate this appliance unless all enclosure panels are properly in place.
18. Do not tamper with controls.
19. To reduce the risk of injury, do not allow children to play in or on the
appliance. Close supervision of children is necessary when the appliance is
used near children.
20. This appliance must be connected to a proper electrical outlet with the correct
electrical supply.
1
English
2
21. Proper grounding must be ensured to reduce the risk of shock and fire. DO
NOT CUT OR REMOVE THE GROUNDING PLUG. If you do not have a
three-prong electric receptacle outlet in the wall, have a certified electrician
install the proper receptacle. The wall receptacle MUST be properly grounded.
22. Hydrogen gas may be produced if the water heater has not been used in more
then 2 weeks. This may be explosive under certain circumstances. If this is the
case, before using this appliance turn on all the hot faucets and let the hot
water run for a few minutes. This will let the trapped hydrogen escape. During
this process do not turn on an electric appliance, smoke, light a match/lighter
or use a flame to avoid an accident, as hydrogen gas is flammable and can
explode.
23. Do not repair or replace any part of the appliance or attempt any servicing
unless specifically recommended in the user-repair instructions, which you
understand and have the skill to carry out.
Note: If for any reason this product requires service, we strongly
recommend that a certified technician perform the service.
24. To reduce the risk or electric shock or fire, do not use extension cords or
adapters to connect the unit to electrical power source.
SAVE THESE INSTRUCTIONS
For Future Use
English
DANGER
Risk of child entrapment. Before you throw away your old
appliance, take off the door so that children may
not easily get trapped inside.
Thank you for purchasing our Haier
product. This easy-to-use manual will
guide you in getting the best use of
your washer.
Remember to record the model and
serial number. They are on a label in
back of the washer.
Model number
Serial number
Date of purchase
Staple your receipt to your manual. You will need it to obtain
warranty service.
Table Of Contents
PAGE
SAFETY INSTRUCTIONS ................................................................1-2
UNDERSTANDING YOUR WASHER ................................................4
PARTS AND FEATURES..................................................................5-6
OPERATING YOUR WASHER ....................................................7-15
UNPACKING AND ACCESSORIES INVENTORY ..........................15
PROPER LOCATION ........................................................................16
INSTALLATION INSTRUCTIONS ..............................................17-19
UNIT DIMENSIONS ........................................................................20
ELECTRICAL CONNECTIONS ..........................................................21
PROPER CARE AND CLEANING ....................................................22
TROUBLESHOOTING GUIDE ....................................................23-25
WARRANTY......................................................................................26
3
English
4
English
Understanding Your Washer
Your automatic washer features an efficient double drive system. This new
technology was developed based on our hand wash system, which replaces the
central agitator with a pulsator to provide more usable space and allow for gentler
cleaning of clothing. The inner washtub and the pulsator at the bottom of the tub
rotate in opposite directions simultaneously to create a powerful yet gentle swirling
motion that lifts and tumbles clothing through a continuous current of water.
The fins on the wall of the inner tub enhance the force of the water flow and prevent
laundry from twisting and knotting. The turning of the pulsator makes the water
spiral in an upward direction around the washtub in a manner that removes soil
and residue from clothes for the ultimate clean. This effective process protects your
clothing from wear and tear and furthermore saves you both time and water.
English
5
W
A
S
H
R
I
N
S
E
S
P
I
N
W
A
S
H
/
R
I
N
S
E
T
E
M
P
W
A
T
E
R
L
E
V
E
L
D
E
L
A
Y
S
T
A
R
T
P
R
O
G
R
A
M
S
T
A
R
T
P
A
U
S
E
P
O
W
E
R
O
N
/
O
F
F
1. Folding Top Lid
2. Control Panel
3. Washer Cabinet
4. Front Leveling Legs
5. Cabinet Handle (located on both
sides of the washer)
6. Pulsator
7. Inner Tub
8. Lint Filter
9. Inner Cover
10. Detergent Dispenser (not shown)
11. Liquid Bleach Inlet
4
5
2
3
OPERATING INSTRUCTIONS
Parts and Features
1
6
7
8
9
10
11
English
6
1. Cold Water Inlet Valve
2. Hot Water Inlet Valve
3. Rear Leveling Legs
4. Drain Hose Connection
(not shown)
5. Power Cord (115V/ 60Hz)
6. Power Cord Holder Clip
5
2
3
4
1
6
English
7
OPERATING YOUR WASHER
Understanding the Control Panel
Power ON/OFF: (1)
• Press the button once to operate the washer. Press the button once again to turn
the washer "OFF".
Start/Pause: (2)
• Press this button once to start the wash process. Press this button once again to
pause the activity during the wash cycle. Push again to resume the wash cycle.
Note: If the "Start/Pause" button is not pushed when the power button is
activated, the unit will shut off automatically in 5 minutes.
Program Select: (3)
• Select your desired cycle program by pressing the "Program Select" button. There
are 8 options to select from: Normal, Light, Quick, Heavy, Synthetic, Cotton, Wool
and Silk.
Delay Start Button: (4)
• This feature allows you to delay the start of the wash cycle from 2 and 24 hours.
Press the "Delay Start" button to choose the number of hours you would like to
delay the start of the cycle. The time delayed will increase by 1 hour for each time
the button is pressed.
Water Level Selector: (5)
• Press the button to select the proper water level setting. You may select from 1 to
10 water level settings depending on the cycle type and the amount of clothing to
be washed.
WASH
RINSE
SPIN
WASH/RINSE
TEMP
WATER
LEVEL
DELAY START
PROGRAM
START
PAUSE
POWER
ON/OFF
123456789
English
8
Temperature Select Wash/Rinse: (6)
• You may select the temperature according to fabric type by pressing the "Temp
Select" button. There are three temperature options: Cold/Cold, Warm/Cold and
Hot/Cold.
• Always refer to the label on the garment for the temperature as recommended by
garment manufacturers. See the reference chart below to select the proper
temperature for fabrics.
WASH/RINSE TYPES OF FABRICS
Cold/Cold Non-color fabrics, lingerie,
clothing with light or normal
Soil, and special care fabrics.
Warm/Cold Delicate and colored fabrics.
Hot/Cold Sturdy whites and colored fabrics
such as work or play clothes and
soiled fabrics
Note: When selecting the hot water option for your load, incoming hot
water must not exceed 122˚F/50˚C.
Spin: (7)
• Push this button to select the number of minutes (0-9) in the spin cycle. The
spinning of the drum at the end of the cycle, extracts excess water from clothing
so that they are not as damp when taken for drying. The spin time varies for each
program.
Rinse: (8)
• Press this button to select the number of times (0-4) clothing is rinsed. The machine
sprays fresh cold water to remove soil and odor from the detergent from the
clothes. The rinse time varies for each program.
Wash: (9)
• The wash time can be set from 0-25 minutes by pressing the button. Each press
will increase the wash time by 1 minute.
Digital Display:
• In normal operation, the indicator light displays the remaining wash time in
minutes.
• When the delay start button is pressed, the display will switch from the minutes
remaining in the wash time to number of hours the cycle has been delayed.
English
9
Function Light Indicator:
• The function display light indicates that the selected feature is ON or that the cycle
is about to begin.
• During the wash cycle, a flashing light indicates the current program.
Note: Refer to the Troubleshooting Guide on page 23-25 for "Error
Code" explanations.
Loading the Washer
• Load each item loosely.
• Separate the white from the colored clothing. Separate heavy fabrics from light
fabrics.
• Carefully check all pockets and cuffs for small items. They can easily slide in to the
tub and cause damage to the tub.
• Pre-treat all stains and heavily soiled areas for best results.
• Do not overload your washer.
• Close the door properly after loading the clothes.
• When loading wet items, keep water level high enough to keep the unit in
balance and to allow clothing to float easily in the water.
English
10
Proper Use of the Dispenser
The detergent dispenser is located inside the washer at the upper middle part
beneath the washer door. Open the dispenser by pulling it out. You will see that
there are 2 compartments.
Right Compartment: Use for fabric softener.
Left Compartment: Use for laundry detergent.
Note: The detergent will be automatically mixed with the water during the
wash cycle at the proper time.
Proper Use of Fabric Softener:
• Pour the liquid fabric softener into the compartment on the right as recommended
by the manufacturer.
• Do not exceed the level indicated in the compartment to avoid overflowing.
Warning: Never pour fabric softener directly onto clothes as it will stain and spot
the clothing.
Proper Use of Detergent:
• The amount of detergent used depends on the size of the load, the water type
(hard or soft) and whether the clothes are heavily soiled or lightly soiled. Besides
the performance of the washing machine, the quality of the detergent also affects
the washing result.
• For best results, use low sudsing detergents.
Softener Compartment
Detergent Compartment
English
11
Proper Use of Bleach:
Use only the bleach manufacturer’s chart for the recommended use of liquid bleach.
Dilute the bleach and add it to the water before putting clothes into the washtub.
Note: You cannot use liquid or powder bleach in the detergent or fabric
softener dispenser.
Warning: Be careful not to spill undiluted bleach onto the washer cabinet or onto
clothing. It is a strong chemical that may damage your clothes and the
finish of the washer if not properly diluted.
Lint Filter
• The filter is located inside the washer at the upper part of the drum. A small nylon
bag collects lint and residue from clothes during the wash cycle.
• You must clean the filter after every load for the best results. Pull up the filter to
remove. Clean and slide the filter back to replace.
Note: Do not wash your clothes without the filter in its compartment
inside the tub.
English
12
Program Select Wash Cycle Options
• To set any function, press the respective function button until the desired level is
reached.
• Total time includes the normal water intake and drain time. Total washing time
may be influenced by the water inlet pressure and the water level needed.
• Spin time is from the time the intermittent spinning starts to the moment it stops
running.
• In the "Quick Cycle", the washing machine will set the complete procedure
automatically.
Cycles Fabric Total
Time
(approx. minutes)
Normal Work and 19 - 25
play clothes,
Household
linens
Light Lightly soiled, 15 - 18
Permanent press
Quick Small loads 6
lightly soiled
under 2 lbs
Heavy Relatively 54
bigger and
thicker clothing
(e.g., jeans)
Synthetic Polyester, Acrylic 41
nylon, etc.
Cotton Cottons 49
Wool Wools 24
Silk Silks 30
English
13
Normal Cycle:
• When the washer is turned on, this cycle is activated. The wash, rinse, spin,
temperature and water level setting can be adjusted as needed. The adjustments
may affect the washing time.
Light Cycle:
• In this cycle, the wash/rinse temperature and water level can be adjusted. The
wash time is preset at 6 minutes, rinse is set at 1 time, and spin cycle is set at 1
minute.
Quick Cycle:
• Only the wash/rinse temperatures can be adjusted. The water level is preset at
level 3, wash time at 2 minutes, the rinse at 1 time, and spin cycle at 1 minute.
Heavy Cycle:
• If needed, adjust the wash, rinse, spin, temp select and water level for customized
settings.
Synthetic Cycle:
• The wash time is preset at 12 minutes, rinse at 2 times, and spin cycle at 4
minutes. You can adjust the water level and temperature to your needs.
Cotton Cycle:
• The wash is preset at 10 minutes, rinse at 3 times, and spin cycle at 4 minutes.
The water level and temperature can be adjusted to your needs.
Wool Cycle:
• The presets are wash at 3 minutes, rinse at 2 times, and spin cycle at 3 minutes.
The water level and temperature can be adjusted to suit your needs.
Silk Cycle:
• The wash is preset at 5 minutes, rinse at 2 times, and spin at 3 minutes. The water
level and temperature can be adjusted to suit your needs.
End-of-Cycle Signal
The machine will beep at the end of the cycle, indicating that the washing is
complete. The "Wash/Rinse/Spin" indicator lights will still be ON. The washer will
turn OFF automatically in approximately 10 minutes after the completion of the
cycle.
English
14
Closing the Top Lid
For safety purposes, the top lid must always be closed during the wash process. If
you open the top lid while the wash cycle is in progress, you will observe the
following:
• An alarm will sound.
• The tub will not spin while the lid is open.
• If the unit is in wash mode, it will stop running.
Simply close the top lid and press the start/pause button to resume the cycle.
Steps for the Wash Process
1. Turn the power ON.
2. Fill the detergent/softener dispenser.
3. Select the desired wash program.
Note: If you choose to keep the "Auto Presets" of the program, skip to
step #5. If you choose to change any or all of the preset options,
continue to step #4. There may be some restrictions when choosing
selected options.
4. Manually Selecting Your Options
• When selecting wash cycle options, please refer to the "Program Select Wash
Cycle Options" section on page 12 for details.
• When selecting delay start, please refer to "Delay Start Button" section on
page 7 for details.
• When selecting water level, please refer to " Water Level Selector" section on
page 7 for details.
• When selecting temperature, please refer to "Temperature Select Wash/Rinse"
section on pages 8 for details.
• Once you have selected the proper settings, go to step #5.
5. Load clothes into the washtub.
6. Close the washer doors properly.
7. Press the "Start/Pause" button to begin the wash process.
Note: If the Normal Program is selected, the machine will automatically select the
water level and wash time according to the clothes and weight of the
laundry. The entire procedure is controlled automatically. The pulsator will
not rotate unless the water is filled to the selected water level.
15
English
Normal Operating Sounds
The following sounds are normally heard during the operation of the washer:
• Tumbling sounds can be heard as heavy wet clothes in the Washer are tossed
around continuously.
• Air rushing noise is the result of the washtub spinning at a very high RPM.
• Clicking sounds are caused by the wash and rinse cycles turning ON and OFF.
Unpacking and Accessories Inventory
Unpacking
1. Remove all packing materials. This includes the foam base and all adhesive tape
holding the washer accessories inside and outside. Slide out and remove the
bottom Styrofoam that is used to protect the washer from shipping damage due
to vibrations and shock.
2. Inspect and remove any remains of packing, tape or printed materials before
using the washer.
Accessories
a) 1 Bottom Panel
b) 8 Screws for the Bottom Plate
c) 2 Water Inlet Hose
d) 1 Drain Hose
e) 1 Drain Hose Clamp
f) 1 Drain Hook (Gooseneck)
g) 4 Washers
h) 1 Inner Plate
i) Quick sink faucet adapter
Check to make sure that the accessories are present and in good condition.
If you find that they are not in good condition or are missing, please contact
our customer service department for assistance. Our Toll-Free number is
1-877-337-3639.
a
b
c
e
d
f
g
h
i
16
English
Proper Location
General
• Select a suitable location for the washer on a hard even surface away from direct
sunlight and heat sources (e.g., radiators, baseboard heaters, cooking appliances,
etc.)
• Any floor unevenness should be corrected with the leveling legs located on the
bottom corners of the washer.
• The washer must be placed at room temperature. You must not place the washer
where the temperature is at or below freezing.
Storage in Cold Environments
• This appliance must be stored at room temperature.
• If you received this appliance when the outside temperature is below freezing, do
not operate until this appliance has warmed to room temperature.
• Do not install or operate this appliance in an area where room temperature is
below freezing.
17
English
Installation Instructions
Read carefully and understand all installation instructions before installing this
washing machine. If after completing the process you are still unsure whether the
washing machine has been properly installed, we recommend that you contact a
qualified installer.
Tools and Materials Required
You will need to use the following tools when installing your washer:
Scissors
Phillips Screwdriver
Flathead Screwdriver
Pliers
Wrench
Tape Measure
Gloves
Level
Installing the Bottom Panel
The bottom panel blocks noises to provide you with the quietest performance
possible during the wash cycle operation.
1. First, lay down the washer on its rear side.
2. Place the panel against the bottom of the machine. Align the holes in the panel
with the holes in the washer.
3. Insert the screws through the holes of the panel into the bottom of the washer and
tighten. (8 screws are supplied)
4. Once all screws have been installed and the panel is in place, return the washer
to its standing position.
18
English
Leveling the Washer
Your washer has 4 leveling legs that are located on the 4 bottom corners. After
properly placing your washer in its final location, you may level the washer.
• Leveling legs can be adjusted by turning them counter-clockwise to raise the
washer and clockwise to lower the washer.
Note: If the machine is slanting more than 2˚ it will not work.
Installing Your Washer
Read the installation instructions carefully before beginning.
1. Connect the hot and cold water inlet hoses to the hot and cold water faucet.
2. Connect the other ends to their respective washer inlets located at the top rear of
the machine. Connect the red tinted hose fitting to the washer and the other end
to the incoming water supply.
3. Install the drain hose to the side of the washer using drain hose clamp. The drain
hose must be placed into a drainpipe or sink at least 1-1/2 inches in diameter.
Use the gooseneck drain hook to hold hose in place. To avoid possible water
back up, the drain hose must reach a height of at least 31-1/2 inches minimum
and 40 inches maximum.
4. Plug in the Washer to a regular 115 Volt / 60 Hz, 15 Amps outlet.
Note: Carefully inspect for any leaks around and back of the machine. If
there is a leak, turn off the unit and unplug it, then check if any
connections are loose. You may need to tighten any loose
connections.
CAUTION: If after completing these steps you are still unsure if unit has been
properly installed, contact a qualified installer. We recommend that the
washer be installed by a certified technician to ensure that it is
properly installed.
Installing Inner Plate
A. Open the top lid of the washing machine.
B. Install the inner plate on the outer tub by aligning the plate shafts to the tub cover
groves.
C. To install, insert on one side first and then snap in on the other side.
Note: Do Not use washer without installing the inner plate.
English
19
Installing Quick Sink Adapter:
When installing quick sink faucet adapter to the faucet, follow the steps below:
A. First remove the aerator from your faucet nozzle and determine the
size/type of the faucet.
B. Once you determine the size/type of the faucet (Outside Threaded End
or Inside Threaded End), place the proper size of rubber washer in
silver faucet adapter.
C. Attach the silver faucet connector to the faucet.
D. Attach faucet connector with water inlet hose by making sure that
rubber washer goes in between.
E. Attach the other end of the water inlet hose to the washer water inlet by
making sure that the rubber washer goes in between.
S
I
N
K
Faucet
Washers
Faucet Adapter
Quick Connector
Water inlet hose
Drain hose
Washer
Washer
Rear View of Washer
Y Connector
(not included)
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
-
1
-
2
-
3
-
4
-
5
-
6
-
7
-
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23
-
24
-
25
-
26
-
27
-
28
Haier HLP22P - 06-03 User manual
- Category
- Washing machines
- Type
- User manual
- This manual is also suitable for
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI