George Kovacs P5283-077-L User manual

Brand: George Kovacs

Model: P5283-077-L

Type: User manual

The George Kovacs P5283-077-L is a wall-mounted lighting fixture designed for indoor use, offering both ambient and task lighting solutions. It features a sleek and modern design with a combination of metal and glass elements, making it suitable for various residential and commercial spaces. The adjustable shade allows for directing light where needed, while the dimmable functionality with ELV dimmer switches enables customized lighting ambiance.

IMPORTANT: Fixture should be installed by a qualified

electrician to ensure proper wiring and installation.

Dimmable with ELV dimmer switches.

INSTALLATION INSTRUCTIONS FOR P5282-077-L/P5283-077-L/P5284-077-L

For Wall Mount Fixture

WARNING! SHUT POWER OFF AT FUSE OR CIRCUIT BREAKER.

AVE RT I SS E ME N T ! CO U P E R L E C O U RA NT A U N I V E AU D E S FU S I B L E S O U D O D I SJ O N C TE U R .

AV E R T I S S E M E N T ! C O U P E R L E C O U R A N T A U N I V E A U D E S F US I B L E S OU D O D I S J O N C T E U R .

PREPARATION

1. Shut off power at the fuse box or circuit breaker box. If

necessary remove the old fixture and mounting hardware.

2. Carefully unpack your new fixture and lay out all the parts

on a clear area. Take care not to lose any small parts

necessary for installation.

MOUNTING THE FIXTURE (FIG. 1)

3. Use the “key holes” located on the mounting plate (C) as a

template to mark the location of the plastic anchors (D) and

pre-drill two holes

4. Install the plastic anchors (D) into the wall.

5. Secure mounting back plate (C) to junction box (A) using

junction boxes screws (B) (Size: 8-32*1/2”L). The side of

the mounting back plate marked “GND” must face out.

6. Align the “key holes” on the mounting plate (C) to the

plastic anchors (D) and secure with screws (E).

CONNECTING THE WIRES (FIG. 2)

7. At this point, connect the electrical wires as shown in Fig. 2,

making sure that all wire connectors are secured. If your

outlet has a ground wire (green or bare copper), connect

the fixtures ground wire to it. Otherwise, connect the fixture

ground wire directly to the back plate (C) using the green

screw provided. After wires are connected, tuck them

carefully inside the junction box.

FINISHING THE INSTALLATION (FIG.1)

8. Fix the bracket (G) to the mounting back plate (C) by using

screws (F). Align glass shade (H) into bracket (G) by

decorative screws (J) and washers (I).

Your installation is now completed. Return power to the junction box

and test the fixture.

CAUTION /ATTENTION: When handling the fixture, do not

apply pressure to the LEDs. Hold the fixture by the base or

bracket (G).

Replacing LED module (Fig. 3)

The LED module can be replaced by a qualified electrician

without cutting of wire and without damage to any decorative

element to which the fixture is attached. See installation steps

for more details (Fig 3.)

a. Shut off power. Remove the fixture from the wall.

b. Remove decorative screws (J) washers (I) and glass shade

(H). Remove screws (F) to disconnect mounting plate (C).

c. Remove screws (K) to disconnect LED module (N) (O) and

heat sink (P). Then release the wires (S) from quick

connector (R) on LED module with using screwdriver (Q)

by lightly pressing on the release button located on the top

of the wire connector.

d. Remove screws (M) and washers to disconnect LED

module (N) from heat sink (P).

e. Reverse steps a-d for installing the new LED module.

Note: The LED module should be provided by a specified

supplier.

FIG.1

Set # A-021-350118(P5282-077-L);

A-021-530118(P5283-077-L)

A-021-800118(P5284-077-L)

- Mounting plate - Ground screw

- Mounting screw*2pcs

Fig.3

Fig.2

FIXTURE

WIRES

Black or

Smooth

HOUSE

WIRES

Black

(Hot)

FIXTURE

WIRES

White or

Ribbed

HOUSE

WIRES

White

(Neutral)

FIXTURE

WIRES

Bare

Copper

(Ground)

HOUSE

WIRES

Green or

Bare

Copper(G

round)

George Kovacs P5283-077-L User manual

George Kovacs P5283-077-L User manual

George Kovacs P5283-077-L User manual

Related papers

Other documents