F) Slide Show of Stored Presentation
Encryption (Disable/64Bits/128Bits) - Select Disable for no WEP
encryption. Select 64 or 128 Bits to enable WEP encryption.
Some wireless device may not support 128 Bits encryption.
WEP Key Entry - Manually enter a set of four keys. If you are
using 64 Bits encryption, then each key must consist of exactly
10 hexadecimal characters in length. f you are using 128 Bits
encryption, then each key must consist of exactly 26
hexadecimal characters in length.
G) The Infra-red Remote Controller
5. Click the Encryption tab to
enable/disable the WEP (Wired
Equivalent Privacy) encryption
and to set its keys (Fig. 20).
Click Apply after entry for
confirmation.
If you turn on the WEP function
of the Projector Server, all
other wireless devices want to
connect to it should also
enable WEP function and use
the same encryption keys.
1. On the Projector Server's on-
screen menu (Fig. 4), select
the Slide Show menu to enter
the Slide Show mode (Fig. 21).
2. Select the folder under the
name of your computer, and
press Play to display your
presentation slides.
3. Use the Forward/Backward on
the remote controller or
PgUp/PgDn on the keyboard
to move to next/previous slide.
Mouse Cursor
pg 8pg 7
Remote to call up the Remote Display menu
Slide to call up the Remote Display menu
Laser to turn on the Laser pointer
Play to press the Play button of the displayed menu
Add to press the Add button of the displayed menu
Delete to press the Delete button of the displayed menu
Exit to exit from the current menu or screen
Tab to move to the next functional block on the menu
Enter the Enter key
The Infra-Red remote control allows you to remotely operate the
on-screen menu of the Projector Server.
Numeric Keypad: to
enter IP or password
Forward & Backward:
move one slide forward
or backward in the
Slide Show.
Up&Dn: move up
or down to
selected item
Left mouse key
Right mouse key
Fig. 20
Fig. 21