Browning BPS Owner's manual

Brand: Browning

Model: BPS

Type: Owner's manual

BPS

SHOTGUN

OWNER’S

MANUAL

Important operating instructions for:

BROWNING BPS

PUMP SHOTGUNS

If you have any questions about your new firearm, this

owner’s manual or other Browning products, contact:

Browning Consumer Information

One Browning Place

Morgan, UT 84050-9326

Phone: (801) 876-2711

browning.com

Please use the space below to record information about

your new firearm.

Model __________________________________________________

Serial Number ____________________________________________

Purchased From __________________________________________

Date of Purchase __________________________________________

THANK YOU FOR CHOOSING BROWNING.

The Browning BPS is a proven shotgun in the field, marsh and range.

Fine workmanship and well-executed design provides a solid,

confidence-inspiring feel when working the action and is the reason

behind the reputation for rugged dependability the BPS has earned.

With a reasonable amount of care, your BPS shotgun is designed

to give you many years of dependable, enjoyable service.

Specifications within this owner’s manual are correct at the time of printing and

subject to change without notice.

CONTENTS PAGE

State Warning ...........................................................................................2

WARNING: You are Responsible for Firearms Safety ...........................2

General Description and Operation .....................................................10

Nomenclature .........................................................................................10

Serial Number ........................................................................................11

Initial Cleaning .......................................................................................11

Operation of the “Safety” ......................................................................12

Slide Release Button ...............................................................................13

Assembly .................................................................................................14

Disassembly ............................................................................................16

Ammunition ...........................................................................................16

Magazine Capacity ................................................................................. 18

Three-Shot Adaptor (Plug) ...................................................................18

Loading ...................................................................................................19

Firing ......................................................................................................21

Unloading ...............................................................................................22

Interchangeable Choke Tube System ....................................................23

Extra Barrels ...........................................................................................27

Mounting a Scope ..................................................................................28

Sight Adjustment ...................................................................................30

Cleaning and Maintenance Suggestions ...............................................31

Magazine Cut-Off ..................................................................................34

Barrel Porting .........................................................................................35

Stock Adjustment (Special Models) ......................................................35

Maintenance of Oil Finish Stocks .........................................................37

Models with Special Finishes ................................................................37

Service or Repair ....................................................................................38

STATE WARNING

According to state law, California requires that firearm manufacturers,

distributors and retailers include conspicuous, specific warnings with

firearms sold in that state.

WARNING: YOU ARE RESPONSIBLE

FOR FIREARMS SAFETY

FAILURE TO FOLLOW ANY OF THE FOLLOWING WARNINGS COULD RESULT

IN SERIOUS INJURY OR DEATH.

As a gun owner, you accept a set of demanding responsibilities. How

seriously you take these responsibilities can be the difference between

life and death.

There is no excuse for careless or abusive handling of any firearm.

At all times handle this firearm and all other firearms with intense

respect for their power and potential danger.

Firearms must be handled responsibly and

securely stored to prevent access by children

and other unauthorized users.

California has strict laws pertaining to

firearms, and you may be fined or

imprisoned if you fail to comply with them.

Visit the Web site of the California Attorney

General at https://oag.ca.gov/firearms for

information on firearm laws applicable to

you and how you can comply.

Prevent child access by always keeping guns

locked away and unloaded when not in use.

If you keep a loaded firearm where a child

obtains and improperly uses it, you may be

fined or sent to prison.

Las armas de fuego deben de ser manipuladas

responsablemente y almacenadas en sitios

seguros para prevenir el acceso a ellas por parte

de niños y personas sin autorización.

California cuenta con leyes estrictas sobre las

armas de fuego, y puede ser multado y

encarcelado si no las obedece. Visite la página

web de California Attorney General,

https://oag.ca.gov/firearms para más

información sobre cómo cumplir con las leyes

de armas de fuego.

Prevenga el acceso de los niños a las armas de

fuego manteniéndolas siempre en un lugar

seguro, bajo llave y descargadas cuando no estén

en uso. Si usted deja un arma cargada al alcance

de un niño, y éste la utiliza indebidamente,usted

podría ser multado e incluso enviado a la cárcel.

Please read and understand all of the cautions, warnings, notices,

proper handling procedures and instructions outlined in this owner’s

manual before using your new firearm.

1 ALWAYS KEEP THE MUZZLE OF YOUR FIREARM POINTED IN A SAFE

DIRECTION EVEN THOUGH YOU ARE CERTAIN IT IS UNLOADED.

Never point any firearm at anything you do not intend to shoot.

Be extremely alert and aware of all persons and property within

the range of your ammunition.

2 NEVER RELY TOTALLY ON YOUR FIREARM’S MECHANICAL “SAFETY”

DEVICE. LIKE ANY MECHANICAL DEVICE, A “SAFETY” CAN SOMETIMES

FAIL; IT CAN BE JARRED OR INADVERTENTLY MANIPULATED INTO AN

UNSAFE CONDITION.

The word “safety” describes a firearm’s trigger block mechanism,

sear block mechanism, hammer block mechanism or firing pin

block mechanism. Mechanical “safeties” are designed to place your

firearm in a safer status, and no guarantee can be made that the

firearm will not fire even if the “safety” is in the on safe position.

Mechanical “safeties” merely aid safe gun handling and are no

excuse for pointing your firearm’s muzzle in an unsafe direction.

See “Operation of the Safety” on page 12 for instructions on the

operation of this firearm’s “safety.”

Remember, safe gun handling does not stop with your firearm’s

mechanical “safety” devices, it starts there. Always treat this firearm

with the respect due a loaded, ready-to-fire firearm.

Some firearms do not have a mechanical “safety.” Many target

firearms, lever-action firearms and pistols do not have manual

“safety” mechanisms. Therefore it is critical to read and

understand the owner’s manual for every firearm which explains

the safe operation of the firearm.

While it is a good idea to “test” your firearm’s mechanical “safety”

periodically for proper function, never test the “safety” while your

firearm is loaded or pointed in an unsafe direction.

3 WHENEVER YOU HANDLE ANY FIREARM, OR HAND IT TO SOMEONE,

ALWAYS OPEN THE ACTION IMMEDIATELY AND VISUALLY CHECK THE

FIREARM’S CHAMBER TO MAKE CERTAIN THAT THE FIREARM IS

COMPLETELY UNLOADED.

Make certain the firearm does not inadvertently contain any

ammunition. Remember, merely removing the magazine does

not mean the chamber is unloaded. Always keep the chamber

empty and the “safety” in the on safe position unless shooting

is imminent.

4 ALWAYS WEAR EAR AND EYE PROTECTION WHEN SHOOTING.

Unprotected, repeated exposure to gunfire can cause hearing

damage. Wear hearing protection (shooting earplugs or muffs)

to guard against such damage.

Wear shooting glasses to protect your eyes from flying particles.

Allow proper distance (eye relief) between a scope and your eye

when firing a scoped rifle, shotgun or pistol. Do not use

unorthodox shooting methods that could cause the rearward travel

of the slide or bolt of a firearm to contact your eyes, face or hands.

Always keep a safe distance between the muzzle of your firearm

and any persons nearby, as muzzle blast, debris and ejecting shells

could inflict serious injury.

Always wear eye protection when disassembling and cleaning any

firearm to prevent the possibility of springs, spring-tensioned

parts, solvents or other agents from contacting your eyes.

5 KEEP ALL FIREARMS UNLOADED DURING TRANSPORT, EVEN

WHEN STORED IN A HOLSTER, GUN CASE, SCABBARD OR

OTHER CONTAINER.

6 DROPPING OR JARRING A LOADED FIREARM CAN CAUSE

ACCIDENTAL DISCHARGE.

This can occur even with the “safety” in the on safe position. Be

extremely careful while hunting or during any shooting activity

to avoid dropping any firearm.

7 HUNTING FROM ELEVATED SURFACES SUCH AS TREESTANDS

IS DANGEROUS.

Doing so may increase the risk of mishandling a firearm. The

following rules should always be observed by you and those you

hunt with. Always make certain that the stand being used is safe

and stable. Always make certain that your firearm is unloaded

when it is being taken up and down from the stand. Always make

certain that your firearm is not dropped from the stand, or

dropped while it is being taken up or down from the stand.

Remember, a loaded firearm may discharge when dropped, even

with the “safety” in the on safe position.

8 STORE YOUR FIREARM AND AMMUNITION SEPARATELY, WELL BEYOND

THE REACH OF CHILDREN.

Take prudent safeguards to ensure your firearm does not become

available to untrained, inexperienced or unwelcome hands. Store

all firearms in secure, locked cases or a gun safe. Keep your firearm

unloaded when not in use.

9 BEWARE OF BARREL OBSTRUCTIONS.

Mud, snow and an infinite variety of other objects may

inadvertently lodge in a barrel bore. It only takes a small

obstruction to cause dangerously increased pressures that

can damage your firearm and cause serious injury to yourself

and others.

BEFORE CHECKING FOR A BARREL OBSTRUCTION, BE CERTAIN

YOUR FIREARM IS COMPLETELY UNLOADED, THERE IS NOT A

LIVE SHELL IN THE CHAMBER AND THE “SAFETY” IS IN THE

ON SAFE POSITION.

After assuring yourself that the firearm is completely unloaded,

open the breech or action and look through the barrel to be sure it

is clear of obstructions. If an obstruction is seen, no matter how

small it may be, clean the bore with a cleaning rod and patch as

described on pages 31-34 of this owner’s manual.

BE ALERT TO THE SIGNS OF AMMUNITION MALFUNCTION. IF YOU

DETECT AN OFF SOUND OR LIGHT RECOIL WHEN A SHELL IS FIRED,

DO NOT LOAD ANOTHER SHELL INTO THE CHAMBER.

If your firearm fails to fire, keep the muzzle pointed in a safe

direction for a minimum of 30 seconds. Rotate the ejection area of

the firearm away from you, carefully open the action and remove

the shell from the chamber. If the primer is indented, the defective

shell should be disposed of in a way that cannot cause harm. If the

primer is not indented, your firearm should be examined by a

qualified gunsmith and the cause of the malfunction corrected

before further use. Glance down the barrel to make sure that no

obstructions remain in the barrel. Completely clear the barrel

before loading and firing again. Failure to follow these instructions

can cause extensive damage to your firearm and possible serious

injury to yourself and others.

11 NEVER INSERT A SHELL OF THE INCORRECT GAUGE INTO

ANY FIREARM.

The gauge of your firearm is marked on the barrel. Store all shells

of different gauges in completely separate and well-marked

containers. Never store shells of mixed gauges in a common

container or in your pockets. See pages 16-18 for more

information on the correct ammunition for your firearm.

12 EXAMINE EVERY SHELL YOU PUT IN YOUR FIREARM.

We assume no responsibility for the use of unsafe or improper

firearm and ammunition combinations or damage or injury

caused by damaged ammunition. It is your responsibility

to read and heed all warnings in this owner’s manual and on

ammunition boxes. See pages 16-18 for more information on the

correct ammunition for your firearm.

13 USE ONLY SAAMI APPROVED AMMUNITION.

The barrel and action of this firearm have been made with

substantial safety margins beyond the pressures developed by

established American commercial loads. Nevertheless, we can

assume no liability for incidents which occur through the use of

shells of nonstandard dimensions or which develop pressures

in excess of commercially available ammunition which has been

loaded in accordance with standards established by the Sporting

Arms and Ammunition Manufacturer’s Institute (SAAMI).

14 DISCHARGING FIREARMS IN POORLY VENTILATED AREAS, CLEANING

FIREARMS OR HANDLING AMMUNITION MAY RESULT IN EXPOSURE

TO LEAD AND OTHER SUBSTANCES KNOWN TO CAUSE BIRTH DEFECTS,

REPRODUCTIVE HARM AND OTHER SERIOUS PHYSICAL INJURY. HAVE

ADEQUATE VENTILATION AT ALL TIMES. WASH HANDS THOROUGHLY

AFTER EXPOSURE.

15 DO NOT SNAP THE FIRING PIN ON AN EMPTY CHAMBER; THE

CHAMBER MAY NOT BE EMPTY!

Treat every firearm with the respect due a loaded firearm, even

though you are certain the firearm is unloaded.

16 KEEP YOUR FINGERS AWAY FROM THE TRIGGER WHILE LOADING

AND UNLOADING UNTIL SHOOTING IS IMMINENT.

17 BE SURE OF YOUR TARGET AND BACKSTOP, PARTICULARLY

DURING LOW LIGHT PERIODS.

Know the range of your ammunition. Never shoot at water or

hard objects.

18 ALWAYS UNLOAD YOUR FIREARM’S CHAMBER BEFORE CROSSING

A FENCE, CLIMBING A TREE, JUMPING A DITCH OR NEGOTIATING

OTHER OBSTACLES.

Never place your firearm on or against a fence, tree, car or other

similar object.

19 BE DEFENSIVE AND ON GUARD AGAINST UNSAFE GUN

HANDLING AROUND YOU AND OTHERS.

Don’t be timid when it comes to firearm safety. If you observe

other shooters violating any of these safety precautions, politely

suggest safer handling practices.

20 BE CERTAIN YOUR FIREARM IS UNLOADED BEFORE CLEANING.

Because so many firearm accidents occur when a firearm is being

cleaned, special and extreme care should be taken to be sure your

firearm is unloaded before disassembly, cleaning and reassembly.

Keep ammunition away from the cleaning location. Never test the

mechanical function of any firearm with live ammunition.

21 TEACH AND SUPERVISE FIREARMS SAFETY TO ALL MEMBERS OF

YOUR FAMILY, ESPECIALLY TO CHILDREN AND NON-SHOOTERS.

Closely supervise newcomers to the shooting sports. Encourage

enrollment in hunting and shooting safety courses.

22 NEVER DRINK ALCOHOLIC BEVERAGES OR TAKE ANY TYPE

OF DRUGS BEFORE OR DURING SHOOTING.

Your vision, motor skills and judgment could be dangerously

impaired, making your gun handling unsafe to you and to others.

23 READ AND HEED ALL WARNINGS IN THIS OWNER’S MANUAL, ON

AMMUNITION BOXES AND WITH ALL ACCESSORIES THAT YOU INSTALL

ON YOUR FIREARM.

It is your responsibility to secure the most up-to-date information

on the safe handling procedures of your Browning firearm. We

assume no liability for incidents which occur when unsafe or

improper firearm accessories or ammunition combinations

are used.

24 PRACTICE PERIODIC MAINTENANCE, AVOID UNAUTHORIZED SERVICING.

Your firearm is a mechanical device which will not last forever,

and as such, is subject to wear and requires periodic inspection,

adjustment and service. Browning firearms should be serviced by

a Browning Recommended Service Center or by our Service

Facility in Arnold, Missouri. We assume no responsibility for

injuries suffered or caused by unauthorized servicing, alterations

or modifications of Browning firearms.

25 DO NOT, UNDER ANY CIRCUMSTANCES, ALTER THE TRIGGER,

“SAFETY” OR OTHER PARTS OF THE FIRING MECHANISM OF

THIS OR ANY OTHER FIREARM EXCEPT AS OTHERWISE DESCRIBED

IN THIS MANUAL.

We reserve the right to refuse service on firearms that have been

altered, added to or substantially changed. Removal of metal from

the barrel, or modifications of the firing mechanism and/or

operating parts may lead to a refusal of service on such firearms.

You will be charged for parts and labor to return the firearm to

original specifications prior to servicing your firearm.

With respect to

AFTERMARKET PARTS OR COMPONENTS

(including,

for example, aftermarket trigger systems, barrels, muzzle brakes,

suppressors, magazines, etc.),

USE AT YOUR OWN RISK

. Browning

firearms are designed and engineered to meet stringent safety

standards. Browning is not responsible for personal injuries or

property damage caused by alterations to a firearm. This includes

the incorporation of aftermarket parts or components that may or

may not satisfy Sporting Arms and Ammunition Manufacturers’

Institute (SAAMI) standards (for example, an aftermarket trigger

system may not satisfy SAAMI minimum trigger pull standards,

etc.) or may create other dangerous conditions. These conditions

may or may not be apparent to the user (for example, installing an

aftermarket barrel may have the effect of altering critical firearm

dimensions, including headspace, and may create an unsafe firing

condition, etc.). Aftermarket parts or components that do not

satisfy SAAMI standards, or that could create other dangerous

conditions, should not be used.

FAILURE TO FOLLOW THIS WARNING COULD RESULT IN SERIOUS

INJURY OR DEATH, AS WELL AS CAUSE DAMAGE TO YOUR FIREARM.

BE CAREFUL!

GENERAL DESCRIPTION AND OPERATION

The Browning BPS is a manually operated, slide action, repeating

shotgun. The action mechanism is operated by moving the slide

(forearm) in a rearward motion, followed by a forward motion. This

action unlocks the breech block, extracts and ejects the fired hull,

transfers a live shell from the magazine to the chamber and locks the

breech block. The BPS is loaded from the bottom of the receiver and

fired hulls are ejected from a bottom ejection port. Bottom loading

and ejection makes the BPS ambidextrous. The BPS is designed so the

barrel can be easily removed by unscrewing the magazine cap from

the magazine tube and then sliding the barrel forward out of the

receiver. This facilitates easy cleaning, transportation and storage.

NOMENCLATURE

In conventional firearm terminology the position and movement of

firearm parts are described as they occur with the firearm horizontal

and in the normal firing position: i.e., the muzzle is forward or in

front; the buttstock is rearward or to the rear; the trigger is downward

or underneath; the rib is upward or on top. For general parts

nomenclature, refer to Figure 1. For specific parts names related to

disassembly, refer to Figure 2 on page 11.

FIGURE 1

Buttstock

Trigger

Receiver

Forearm

Barrel

Muzzle

Rib

“Safety”

Slide Release Button

(Opposite Side)

Magazine Cap

Recoil Pad

Front Sight

Magazine

SERIAL NUMBER

The serial number of your BPS shotgun is found on the right side of

the receiver, at the bottom, near the front, just above the ejection/

loading port.

INITIAL CLEANING

PLEASE TAKE NOTE OF THE FOLLOWING INFORMATION BEFORE CLEANING

YOUR FIREARM.

CLEANING PARTS WITH SPECIAL FINISHES

Be especially careful when cleaning firearms with camouflage,

Dura-Touch

Armor Coating and other special finishes. Always

prevent these surfaces from coming in contact with cleaning solvents,

barrel scrubbers and other strong chemicals. It is preferable to clean

these surfaces with a lightweight gun oil containing no solvents, or

with a damp cloth and mild dish soap (be sure to keep water out of

the action). When cleaning your firearm’s bore and action, protect the

external finishes from any contact with chemicals used. Also, avoid

any contact between external finishes and other strong chemicals like

FIGURE 2

Receiver

Action Bars

Loading/Ejection Port

Barrel

Forearm

Three-Shot

Adaptor (Plug)

Barrel Tab

Barrel Extension

Barrel Guide Ring

Magazine Cap

those found in DEET-containing insect repellents, sunscreens, etc.

Damage to camouflage, Dura-Touch and other finishes caused by

chemicals is irreversible and not repairable.

CLEANING

Various exposed metal parts of your new firearm have been coated at

the factory with a rust preventative compound. Before assembling

your shotgun, clean the anti-rust compound from the inside of the

barrel, receiver and the action/chamber areas. A high-quality

lightweight gun oil is ideal for removing this compound, and for

giving your new firearm its first lubrication. Clean the barrel using a

cleaning rod and patch as explained under “Cleaning and

Maintenance Suggestions” on pages 31-34.

OPERATION OF THE “SAFETY”

ALWAYS KEEP THE “SAFETY” IN THE ON SAFE POSITION UNLESS

SHOOTING IS IMMINENT. ALWAYS KEEP THE MUZZLE POINTED IN A SAFE

DIRECTION. FAILURE TO FOLLOW THESE WARNINGS COULD RESULT IN

SERIOUS INJURY OR DEATH.

The “safety” is located on the top rear portion of the receiver. To move

the “safety” to the on safe position, slide the “safety” rearward with

your thumb so that the red warning dot is covered (Figure 3, page 13).

To move the “safety” to the off safe position, slide the “safety” forward

with your thumb, exposing the red warning dot, indicating that the

firearm is ready to fire (Figure 4, page 13).

DO NOT DEPEND ON THE RED COLOR ALONE TO INDICATE YOUR

FIREARM’S SAFETY STATUS. TIME, EXPOSURE TO THE ELEMENTS, AND

THE ABRASIVE ACTION OF CLEANING AGENTS CAN ERASE IT. FAILURE TO

FOLLOW THIS WARNING COULD RESULT IN SERIOUS INJURY OR DEATH.

SLIDE RELEASE BUTTON

When the forearm on the BPS is positioned fully forward it locks into

position, closing and locking the breech block. It is necessary to release

the breech block and allow the forearm to be pulled rearward, in order

to follow “Assembly” as outlined on pages 14-15 and normal firing

procedures. The button is located on the left side of the trigger guard,

at the rear, behind the trigger (Figure 5).

To release the slide, apply rearward pressure on the forearm while

simultaneously pushing up on the slide release button. The button

moves upward and slightly to the rear when depressed.

If you are a right-handed shooter,

reach under the rear of the trigger

guard, to the opposite side with

your finger and push up on the

button. Left-handed shooters simply

lift up on the button with your

trigger finger. Specific uses of the

slide release button are outlined in

the following sections.

FIGURE 5

Apply rearward pressure on the forearm while

simultaneously pushing upward on the slide

release button.

FIGURE 3

The “safety” shown in the on safe position.

FIGURE 4

The “safety” shown in the off safe position.

ASSEMBLY

ALWAYS KEEP THE MUZZLE POINTED IN A SAFE DIRECTION. BEFORE

STARTING ASSEMBLY PROCEDURES, VISUALLY INSPECT THE CHAMBER

TO BE ABSOLUTELY CERTAIN THE FIREARM IS COMPLETELY UNLOADED.

PLACE THE “SAFETY” IN THE ON SAFE POSITION. FAILURE TO FOLLOW

THIS WARNING COULD RESULT IN SERIOUS INJURY OR DEATH.

The BPS is delivered, in the box, with the barrel removed and the

forearm still attached to the magazine tube.

IT IS IMPORTANT TO FOLLOW THE EXACT SEQUENCE FOR ASSEMBLY IN

STEPS 1 AND 2, IN ORDER TO PROPERLY ASSEMBLE YOUR BPS.

1 Remove the magazine cap. Depress the slide release button and

pull the forearm completely rearward.

IMPORTANT: In order to introduce the barrel extension into the

receiver, the carrier must be lowered. To lower the carrier, the

forearm must be moved completely to the rear. Then, the forearm

must be partially moved forward (step 2) so that the barrel

extension will not bind against the carrier. With the ejection port

downward, the bolt will retain the carrier in a position low enough

to allow easy insertion of the barrel.

2 Hold the stock/receiver in a horizontal position with the ejection

port down. Then, with the forearm already in the fully rearward

position, push the forearm forward until the rear of the forearm is

even with the front of the receiver (Figure 6, page 15).

DO NOT SQUEEZE HARD ON THE OPEN REAR END OF A WOOD FOREARM.

TOO MUCH PRESSURE COULD CAUSE THE WOOD TO SPLIT.

3 Before attaching the barrel, be sure to glance through the bore to be

sure it is clear of any obstructions.

4 With the forearm positioned as explained in step 2, insert the barrel

extension into the receiver. Move the barrel rearward, guiding the

barrel guide ring over the magazine tube. The barrel tab projects

from the most rearward rib post on the top of the barrel. Be sure

the barrel tab aligns with and enters the recess in the front, upper

surface of the receiver (Figure 7).

IMPORTANT: BPS Deer guns are shipped with a barrel stabilizing

split ring and a barrel stabilizing lock washer on the magazine tube.

This special design ensures a very rigid barrel mounting method for

maximum accuracy. You must remove the barrel stabilizing ring and

washer from the magazine tube before installing the barrel. After

mounting the barrel to the action, slide the barrel stabilizing split

ring on the magazine tube, being sure that the beveled surfaces of

both the split ring and the guide ring match. Place the lock washer

on top of the split ring (Figure 8, page 16).

5 Replace the magazine cap.

FIGURE 7

Be sure the barrel tab aligns with and

enters the recess in the front, upper surface

of the receiver.

FIGURE 6

Push the forearm forward until the rear of the

forearm is even with the front of the receiver.

DISASSEMBLY

ALWAYS KEEP THE MUZZLE

POINTED IN A SAFE

DIRECTION. BEFORE

STARTING DISASSEMBLY

PROCEDURES, OPEN THE

ACTION AND VISUALLY

INSPECT THE CHAMBER TO

BE ABSOLUTELY CERTAIN THE

FIREARM IS COMPLETELY

UNLOADED. PLACE THE

“SAFETY” IN THE ON SAFE POSITION. FAILURE TO FOLLOW THIS

WARNING COULD RESULT IN SERIOUS INJURY OR DEATH.

1 Place the slide in its forward position. Unscrew the magazine cap

and remove it.

2 Holding the receiver in one hand, and the barrel in the other, ease

the barrel forward off the magazine tube and out of the receiver.

IMPORTANT: On BPS Deer models it is necessary to first remove

the barrel stabilizing lock washer and split ring before removing

the barrel (Figure 8).

3 No further disassembly is recommended.

AMMUNITION

DISCHARGING FIREARMS IN POORLY VENTILATED AREAS, CLEANING

FIREARMS OR HANDLING AMMUNITION MAY RESULT IN EXPOSURE TO

LEAD AND OTHER SUBSTANCES KNOWN TO CAUSE BIRTH DEFECTS,

REPRODUCTIVE HARM AND OTHER SERIOUS PHYSICAL INJURY. HAVE

ADEQUATE VENTILATION AT ALL TIMES. WASH HANDS THOROUGHLY

AFTER EXPOSURE.

FIGURE 8

Place the barrel stabilizing lock washer on top of the

barrel stabilizing split ring.

Forearm

Barrel Stabilizing

Split Ring

Barrel Guide Ring

Magazine Tube

Magazine Cap

Barrel Stabilizing

Lock Washer

Barrel

Beveled

Surface

USE ONLY SHELLS OF THE CORRECT GAUGE AND LENGTH. THE GAUGE

AND LENGTH OF THE CHAMBER IS INSCRIBED ON THE SIDE OF THE

BARREL. DO NOT USE AMMUNITION OTHER THAN WHAT IS INSCRIBED

ON THE SIDE OF THE BARREL. EXAMINE EVERY SHELL YOU PUT IN YOUR

SHOTGUN. FAILURE TO FOLLOW THIS WARNING COULD RESULT IN

SERIOUS INJURY OR DEATH AND CAUSE DAMAGE TO YOUR SHOTGUN.

USE SHELLS OF THE CORRECT LENGTH. DO NOT USE 3" OR 3½" SHELLS

IN A BARREL WITH A 2¾" OR 2½" CHAMBER, OR 3½" SHELLS IN A

BARREL WITH A 3" CHAMBER.

DOING SO CAN RESULT IN A BUILDUP OF

DANGEROUSLY HIGH PRESSURES. FAILURE TO FOLLOW THIS WARNING

COULD RESULT IN SERIOUS INJURY OR DEATH AND CAUSE DAMAGE TO

YOUR SHOTGUN.

DO NOT PUT A 16 OR 20 GAUGE SHELL IN A 12 GAUGE SHOTGUN. DO

NOT PUT A 28 GAUGE SHELL IN A 20 GAUGE SHOTGUN. DO NOT PUT A

.410 BORE SHELL IN A 28 GAUGE SHOTGUN. NEVER PUT METALLIC

CARTRIDGES OF ANY KIND IN A SHOTGUN. SPECIFICALLY, NEVER PUT

CENTERFIRE RIFLE OR PISTOL CARTRIDGES IN A SHOTGUN CHAMBERED

FOR .410 BORE. FAILURE TO FOLLOW THIS WARNING COULD RESULT IN

SERIOUS INJURY OR DEATH AND CAUSE DAMAGE TO YOUR SHOTGUN.

The most certain way to bulge or rupture a shotgun barrel is to load

a smaller gauge shell into a larger gauge chamber. The smaller gauge

shell will not fall completely through the barrel; its rim is caught by

the front of a larger gauge chamber or at the larger gauge’s choke.

Your shotgun will misfire (with the chamber appearing to be empty).

It is then possible to load the correct gauge shell behind the smaller

gauge shell. If the shotgun is then fired, the result will be a so-called

“12-16, 12-20, 20-28 or 28-.410 burst” which can cause extensive

damage to your shotgun and possible serious injury to you and others.

We can assume no responsibility for incidents which occur through

the use of shells of nonstandard dimension or those developing

pressures in excess of SAAMI (Sporting Arms and Ammunition

Manufacturer’s Institute) established standards.

BPS 3" chamber models will shoot all factory lead and steel 2¾" and

3" field loads. BPS 3½" chamber models will shoot all factory lead and

steel 12 gauge 2¾", 3" and 3½" field loads.

MAGAZINE CAPACITY

With the magazine three-shot adaptor (plug) removed, BPS 3"

shotguns will hold four 2¾" or three 3" shells in the magazine.

BPS 3½" shotguns will hold four 2¾", or three or 3" or 3½" shells

in the magazine.

THREE-SHOT ADAPTOR (PLUG)

ALWAYS KEEP THE MUZZLE POINTED IN A SAFE DIRECTION. BEFORE

REMOVING OR INSTALLING THE THREE-SHOT ADAPTOR, COMPLETELY

UNLOAD THE SHOTGUN. OPEN THE ACTION AND VISUALLY INSPECT

THE CHAMBER, FEED MECHANISM AND MAGAZINE TO BE ABSOLUTELY

CERTAIN THE FIREARM IS COMPLETELY UNLOADED. PLACE THE “SAFETY”

IN THE ON SAFE POSITION. FAILURE TO FOLLOW THIS WARNING COULD

RESULT IN SERIOUS INJURY OR DEATH.

WEAR EYE PROTECTION WHEN REMOVING OR INSTALLING THE

THREE-SHOT ADAPTOR TO PREVENT SPRINGS, SPRING-LOADED PARTS,

SOLVENTS OR OTHER AGENTS FROM CONTACTING YOUR EYES,

RESULTING IN INJURY.

The BPS shotgun is delivered with the magazine three-shot adaptor

(plug) installed in the magazine, limiting magazine capacity to two

shells in compliance with federal migratory bird regulations. If you do

not wish to be limited to three shots, when it is not required by law,

you can remove (or reinstall) the three-shot adaptor as follows:

REMOVING THE THREE-SHOT ADAPTOR (PLUG)

1 Unscrew the magazine cap and remove it.

2 The magazine three-shot adaptor lays on top of the magazine

spring retainer located in the forward end of the magazine tube

Page is loading ...

Browning BPS Owner's manual

Browning BPS Owner's manual

Browning BPS Owner's manual

Related papers

Other documents