Bushranger BRU36v9101 User manual

Bushranger
Brand
Bushranger
Model
BRU36v9101
Category
Power tools
Type
User manual

This manual is also suitable for

Bushranger BRU36v9101 is a 36V cordless electric line trimmer engineered for cutting grass and light weeds around your home. It features a bump feed nylon head for quick and easy line advancement, and a powerful motor that delivers ample power for tackling overgrown grass and weeds. The trimmer's lightweight design and adjustable handle provide comfortable operation, while its durable construction ensures longevity. With the included harness, you can effortlessly maneuver the trimmer while keeping your arms and shoulders relaxed.

Bushranger BRU36v9101 is a 36V cordless electric line trimmer engineered for cutting grass and light weeds around your home. It features a bump feed nylon head for quick and easy line advancement, and a powerful motor that delivers ample power for tackling overgrown grass and weeds. The trimmer's lightweight design and adjustable handle provide comfortable operation, while its durable construction ensures longevity. With the included harness, you can effortlessly maneuver the trimmer while keeping your arms and shoulders relaxed.

1
36V BATTERY POWERED LINE TRIMMER
BRU36v9101
OPERATOR’S MANUAL
2
TABLE OF CONTENTS
Introduction
Safety Rules & Precautions
Preparation
Operation
Maintenance & Storage
Personal Safety
Transportation & Storage
Maintenance & Care
Residual Risk
Risk Reduction
Product Description
Check List
Detailed Description Of The Product
Getting Started
Overview
Respooling Nylon Head
Cleaning / Operation
Technical Data
08
09
Warranty
Warranty
18
03
Introduction
04
04
05
05
06
06
10 - 12
14 - 15
07
07
16
13
17
3
INTRODUCTION
Thank you for choosing this Bushranger
®
product. We are sure you shall appreciate the quality and performance of this
machine, which will facilitate your task for a long period of time.
Remember that you can contact your Bushranger
®
dealer for any queries regarding assembly and maintenance, as well as
for the resolution to any problems that may arise, and for the purchase of spare parts and/or accessories.
WARNING
Please read these Operating Instructions carefully as well as the safety precautions before using your device. Failure to do
so could result in an electric fault, fire hazard and/or in personal injury. The manufacturer will not take responsibility for
accidents or injuries caused to the user, third parties or objects as a result for not following
the instructions in the user manual.
Safety Markings and Symbols
Read this instruction book carefully before using the
line trimmer and keep it in a safe place for future
reference.
Warning!
Keep bystanders 15m away.
Wear hearing and eye protection.
Do not expose to rain or damp conditions.
Beware of sharp blades. Blades continue to rotate after
the motor is switched off.
The charger is intended for indoor use only.
Wait until all machine componenets have
completely stopped before touching them.
The machine is protected against ingress of water
drop from vertical direction.
Do not operate on inclines greater than 15°. Do
not trim across the face of slopes, never up and
down.
CE Marking: The product meets demands and
regulations set by the European Community.
WEEE Marking: CAUTION! Unusable power tools
do not belong with domestic waste. They must be
taken to a communal collecting point for
environmentally friendly disposal in accordance
with local regulation.
4
SAFETY RULES & PRECAUTIONS
WARNING
Read all safety warnings and all instructions. Failure to shock, fire and/or follow the warnings and instructions may result in
electric serious injury. Save all warnings and instructions for future reference.
Intended Use
• The product is designed for cutting grass and light weeds in a domestic application. The product is not designed to be
used for cutting or chopping hedges, shurbs and bushes.
IMPORTANT - READ CAREFULLY BEFORE USE, KEEP FOR FUTURE REFERENCE
Safe Operating Practices
Training
• Read the instructions carefully. Be familiar with the controls and the correct use of the machine.
• Never allow children, persons with reduced physical, sensory, mental capabilities, lack of experience, knowledge or
people unfamiliar with these instructions to use the machine.
• Keep in mind that the operator or user is responsible for accidents or hazards occurring to other people or their
property.
Preparation
• Before use, always visually inspect the machine for damaged, missing or misplaced guards or shields.
• Never operate the machine while people, especially children, or pets are nearby.
Operation
• Wear eye protection, long trousers and closed in shoes at all times while operating the machine.
• Avoid using the machine in bad weather conditions especially when there is a risk of lightning.
• Use the machine only in daylight or good artificial light.
• Never operate the machine with damaged guards or shields or without guards or shields in place.
• Switch on the motor only when hands and feet are away from the cutting means.
• Always disconnect the machine from the battery pack:
- Whenever the machine is left unattended;
- Before clearing a blockage;
- Before checking, cleaning or working on the machine;
- After striking a foreign object;
- Whenever the machine starts vibrating abnormally.
5
SAFETY RULES & PRECAUTIONS
Maintenance And Storage
• Disconnect the machine from the battery pack before carrying out maintenance or cleaning work.
• Use only the manufacturer’s recommended replacement parts and accessories.
• Inspect and maintain the machine regularly. Have the machine repaired only by an authorized repairer.
• When not in use, store the machine out of the reach of children.
Additional General Safety Warnings
Work Area Safety
• Keep work area clean and well lit. Cluttered or dark areas invite accidents.
• Do not operate power tools in explosive atmospheres, such as in the presence of flammable liquids, gases or dust.
• Power tools create sparks which may ignite the dust or fumes.
• Keep children and bystanders away while operating a power tool. Distractions can cause you to lose control.
Personal Safety
• Stay alert, watch what you are doing and usecommon sense when operating a power tool. Do not use a power tool
while you are tired or under the influence of drugs, alcohol or medication. A moment of inattention while operating
power tools may result in serious personal injury.
• Use personal protective equipment. Always wear eye protection. Protective equipment such as non-skid safety shoes,
hard hat, or hearing protection used for appropriate conditions will reduce personal injuries.
• Prevent unintentional starting. Ensure the switch is in the off-position before connecting to power source and/or battery
pack, picking up or carrying the tool. Carrying power tools with your finger on the switch or energising power tools that
have the switch on invites accidents
• Remove any adjusting key or wrench before turning the power tool on. A wrench or a key left attached to a rotating part
of the power tool may result in personal injury.
• Do not overreach. Keep proper footing and balance at all times. This enables better control of the power tool in
unexpected situations.
• Your trimmer is fitted with a harness. Carefully adjust the harness to fit comfortably and help to support the weight of
the machine at your right side.
• Identify the Quick Release mechanism and practice using it BEFORE you start using the machine. It’s correct use may
prevent serious injury in the case of an emergency. Never wear additional clothing over the harness or otherwise restrict
access to the quick release mechanism.
• Both hands must be used at all times to control this product.
6
WARNING
Some regions have regulations that restrict the use of the product. Check with your local authority for advice.
Transportation And Storage
• Stop the machine and allow it to cool before storing or transporting. Do not store or transport the machine with batteries
fitted, remove and secure separately.
• Clean all foreign material from the product. Store it in a cool dry and well-ventilated place that is inaccessible to
children. Keep away from corrosive agents such as garden chemicals and de-icing salts. Do not store outdoors.
• For transportation, secure the machine against movement or falling to prevent injury to persons or damage to the
machine.
Maintenance
WARNING
Use only original manufacturer’s replacement parts, accessories and attachments. Failure to do so can cause possible
injury, poor performance and may void your warranty.
WARNING
Servicing requires extreme care and knowledge and should be performed only by a qualified service technician. For service
we suggest you return the product to your nearest authorized service center for repair. When servicing, use only identical
replacement parts.
• You may make adjustments and repairs described here. For other repairs, contact the authorized service agent.
• Before any maintenance or adjustment, disable the machine by removing the battery pack.
• After extending new cutter line cleaning, checking the head, always return the product to its normal operating position
before starting.
• After each use, clean the product with a soft dry cloth.
• Check all nuts, bolts and screws at frequent intervals for proper tightness to ensure the product is in safe working
condition. Any part that is damaged should be properly repaired or replaced by an authorized service centre.
Intended Use
• The product is only intended for use outdoors. For safety reasons the product must be adequately controlled by using
two handed operation.
SAFETY RULES & PRECAUTIONS
7
Residual Risk
• Even when the product is used as prescribed, it is still impossible to completely eliminate certain residual risk factors.
The following hazards may arise in use and the operator should pay special attention to avoid the following:
- Injury caused by vibration. Always use the right tool for the job, use designated handles and restrict working time
and exposure.
- Exposure to noise can cause hearing injury. Wear ear protection and limit exposure.
Risk Reduction
• It has been reported that vibrations from hand-held tools may contribute to a condition called Raynaud’s Syndrome
in certain individuals. Symptoms may include tingling, numbness and blanching of the fingers, usually apparent upon
exposure to cold. Hereditary factors, exposure to cold and dampness, diet, smoking and work practices are all thought
to contribute to the development of these symptoms. There are measures that can be taken by the operator to possibly
reduce the effects of vibration:
- Keep your body warm in cold weather. When operating the unit wear gloves to keep the hands and wrists warm. It
is reported that cold weather is a major factor contributing to Raynaud’s Syndrome.
- After each period of operation, exercise to increase blood circulation.
- Take frequent work breaks. Limit the amount of exposure per day.
If you experience any of the symptoms of this condition, immediately discontinue use and see your doctor about these
symptoms.
WARNING
Injuries may be caused, or aggravated, by prolonged use of a tool. When using any tool for prolonged periods, ensure you
take regular breaks.
SAFETY RULES & PRECAUTIONS
8
CHECK LIST
x 1
x 1
x 1
x 1
x 1
TPFT3626
x 3
x 1
x 4
x 1
x 1
x 1
x 1
x 1
English | 7
x 1
x 1
x 1
x 1
x 1
x 1
x 1
x 1
TPFT3626
x 3
x 1
x 4
x 1
x 1
x 1
x 1
x 1
English | 7
x 1
x 1
x 1
x 1
x 1
x 1
x 1
x 1
TPFT3626
x 3
x 1
x 4
x 1
x 1
x 1
x 1
x 1
English | 7
x 1
x 1
x 1
x 1
x 1
x 1
x 1
x 1
TPFT3626
x 3
x 1
x 4
x 1
x 1
x 1
x 1
x 1
English | 7
x 1
x 1
x 1
9
Handle knobs
Height
adjustment
lever
Baillever
Grass
catcher
bag
Lower
handle
Rearchute
cover
Frontwheel
Rearwheel
Upper
handle
Safety
lock-out
button
Batterydoor
Sidedischargecover
10
PRODUCT DESCRIPTION
The safe use of this product requires an understanding of the information on the product and in
this operator’s manual as well as a knowledge of the project you are attempting. Before use of this
product, familiarize yourself with all operating features and safety rules.
DETAILED DESCRIPTION OF THE PRODUCT
Sidedischarge
chute
Mulching
plug
36VCharger
36VBattery
1. Safety Lock Button
2. Trigger
3. Rear Handle
4. Handle
5. Drive Tube
6. Line Cutter Guard
7. Tap And Go Head
8. Two Speed Button
9. Battery
10. Charger
KNOW YOUR PRODUCT
7
8
Handle knobs
Height
adjustment
lever
Baillever
Grass
catcher
bag
Lower
handle
Rearchute
cover
Frontwheel
Rearwheel
Upper
handle
Safety
lock-out
button
Batterydoor
Sidedischargecover
10
PRODUCT DESCRIPTION
The safe use of this product requires an understanding of the information on the product and in
this operator’s manual as well as a knowledge of the project you are attempting. Before use of this
product, familiarize yourself with all operating features and safety rules.
DETAILED DESCRIPTION OF THE PRODUCT
Sidedischarge
chute
Mulching
plug
36VCharger
36VBattery
9
10
6
2
10
GETTING STARTED
Getting started
1
2a
4
TPFT 3626
TPLT 3626
English | 10
1
3
2
ASSEMBLING THE UNIT
Getting started
3b
7
8
English | 12
2
1
3
1
1
2
PUTTING TAP & GO HEAD ON
Fig. 1
Fig. 2
Fig. 3 Fig.4
Fig.5
Getting started
3a
5 6
English | 11
2
3
4
5
1
2
PUTTING HARNESS ON
SAFETY
INSERT PIN TO LOCK THE GEARBOX
11
GETTING STARTED
PUTTING BATTERY IN START UP
1. Push in safety lock button & 2. squeeze in trigger.
Overview
TPLT 3626
English | 13
Getting started
3b
7
8
English | 12
2
1
3
1
1
2
Fig.6 Fig.7
Operation
1
2
3
1
1
2
English | 15
1
1
2
CUTTING TIPS
Overview
TPLT 3626
English | 13
12
Operation
English | 2
English | 16
LINE TRIMMER OPERATION / SAFETY
GETTING STARTED
Operation
English | 2
English | 16
Operation
English | 2
English | 16
TIPS
Operation
English | 2
English | 16
TIPS
TIPS SAFETY
13
OVERVIEW
Operation
1
2
3
1
1
2
English | 15
1
1
2
Operation
1
2
3
1
English | 18
Operation
1
2
3
1
English | 18
Operation
1
2
3
1
English | 18
TIPS
14
Maintenance
2
1
3
English | 21
1
1
RESPOOLING NYLON HEAD
Respooling nylon head refer to the below steps.
NOTE: Nylon head does not need to be removed off Line-Trimmer.
Push in tabs on both sides to remove
top cover. Refer to red circle.
Remove top cover. Remove spool from housing.
Spool will hold 2 meters of 2mm cord.
Find the middle of cord and make a
loop as shown in picture.
Loop cord into the slot as shown in
picture.
On the spool there is an arrow showing
the direction on which way to wind the
cord on (Arrow, RH, wind line). Refer to
red circle.
Lock both ends of line in one of the four
slots on the spool. Refer to red circles.
Remove battery.
15
OPERATION
Insert spool into housing. Unlock line from spool and put through
eyelets. Refer to red circles.
Reconnect spool and top cover to
housing.
1. Spool x1 – P/N -410067001
2. Spring x1 – P/N - 230074001
3. Main housing x1 – P/N - 410068001
4. Top cover x1 – P/N - 410069001
5. Eyelets x2 – P/N - 320038001
1
2
3
4
5
16
Maintenance
2
1
Maintenance
English | 22
battery and charger
1
English | 24
2
CLEANING
battery and charger
1
English | 24
2
Maintenance
2
1
Maintenance
English | 22
OPERATION
Remove battery.
1. Battery 2. Charger
1
2
Battery & Charger connected
17
TECHNICAL DATA
CORDLESS LINE TRIMMER
Model BRU36v9101
Voltage 36 v
No-load Speed 6500 min-1
Cutting Line Diameter 2.5mm
Cutting Capacity 260mm
Recommended Torque for Blade
Retention
> 11 N.m
Recommended Torque for Trimmer Head
Retention
> 6 N.m
Vibration Level (in accordance with EN
786 Annex D)
< 3.0 m/s
2
Uncertainty of Measurement
1.5 m/s
2
Noise emission level (in accordance with EN 786 Annex E)
A-weighted Sound Pressure Level
82dB(A)
Uncertainty Of Measurement
3.0 dB
A-weighted Sound Pressure Level At
Operator’s Position
96dB(A)
Uncertainty Of Measurement
3.0 dB
Max. Weight Without Battery Pack
3.2 kg
BATTERY AND CHARGER
Battery pack BRAT36v6250, BRAT36v6251,
BRAT36v6500
Charger BRAT36v6525
WARNING
The declared vibration value has been measured with standard test method and may be used to compare one tool with
another. The declared vibration value may be used in a preliminary assessment of exposure. The vibration emission during
actual use of power tool can differ from the declared total value depending on the ways in which the tool is used. Identify
safety measures to protect yourself based on an estimation of exposure in the actual conditions of use, taking account of
all parts of the operating cycle such as the times when the tool is switched off and when it is running idle in addition to the
trigger time.
18
WARRANTY
1. Australian Consumer Law (REG. 90):
The benefits to the consumer given by this warranty are in addition to other rights and remedies of the consumer under a
law in relation to the good or services to which this warranty relates.
Our goods come with guarantees that cannot be excluded under the Australia Consumer Law. You are entitled to a
replacement or refund for a major failure and for compensation for any other reasonably foreseeable loss or damage. You
are also entitled to have the good repaired or replaced if the goods fail to be of acceptable quality and the failure does not
amount to major failure.
The text above applies notwithstanding anything else expressed or implied to the contrary in this warranty document.
Powerup Lawn Care
a division of
Roy Gripske & Sons Pty. Ltd
11 Sodium St, Narangba QLD 4504
Telephone: 1300 363 027
Fax: 1800 332 213
Email: [email protected]
For more information please visit our website:
poweruplawncare.com.au
3
Y E ARS
D OMESTIC
W ARRANTY
19
NOTES
20
Visit www.rgs.com.au or call 1300 363 027 for more information.
Copyright © Roy Gripske and Sons Pty. Ltd. 2018. All rights reserved. 1041. Images are for illustrative purposes only.
Bushranger™ is a trademark of Roy Gripske & Sons Pty Ltd. PLP shall not be liable for technical or editorial errors
or omissions contained herein, nor for incidental or consequential damages resulting from furnishing this material. The
information is provided “as is” without warranty of any kind and is subject to change without notice. PLP also reserves
the right to revise the content of this document at any time without prior notice. No part of this document may be
reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying, recording or
storing in a retrieval system, or translated into any language form without prior written permission of PLP.
Powerup Lawncare Products
Phone 1300 363 027
Fax: 1800 332 213
Email: [email protected]
Web: www.rgs.com.au
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20

Bushranger BRU36v9101 User manual

Bushranger
Brand
Bushranger
Model
BRU36v9101
Category
Power tools
Type
User manual
This manual is also suitable for

Bushranger BRU36v9101 is a 36V cordless electric line trimmer engineered for cutting grass and light weeds around your home. It features a bump feed nylon head for quick and easy line advancement, and a powerful motor that delivers ample power for tackling overgrown grass and weeds. The trimmer's lightweight design and adjustable handle provide comfortable operation, while its durable construction ensures longevity. With the included harness, you can effortlessly maneuver the trimmer while keeping your arms and shoulders relaxed.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents