Samyung N800/NF800 Owner's manual

1

Contents

1. GPS PLOTTER ........................................................................................... 3

1. GPS Overview ......................................................................................... 4

2. FEATURES ................................................................................................. 5

1. GPS Antenna & Receiver ........................................................................ 6

2. Main Unit Features & Functions .............................................................. 6

3. Standard Scope of Supply ....................................................................... 8

3. Device & Display ....................................................................................... 9

1. Display Device ....................................................................................... 10

2. Remote Controller Button ....................................................................... 11

3. Power ON/OFF ...................................................................................... 12

4. Menu ...................................................................................................... 13

5. Display mode ......................................................................................... 14

4. Operating Instruction .............................................................................. 21

1. Data ....................................................................................................... 22

1.1 Track Data ............................................................................. 22

1.2 Mark Data ............................................................................. 30

1.3 User Coast Line .................................................................... 37

1.4 Waypoint Data ....................................................................... 42

1.5 Route Data ............................................................................ 48

1.6 Disk Format ........................................................................... 50

1.7 Seabed Symbol ..................................................................... 51

1.8 Program Update .................................................................... 52

2. Set Up .................................................................................................... 53

2.1 Navigation Set ....................................................................... 53

2.2 Alarm Set .............................................................................. 61

2.3 Own Ship Set ........................................................................ 68

2.4 Cursor Setup ......................................................................... 70

2.5 Ship Tracking (“S” type plotter has no this function) .......... 71

2.6 Simulation ............................................................................. 72

2.7 Etcetera Set .......................................................................... 73

3. System................................................................................................... 75

3.1 Satellite Information .............................................................. 75

3.2 Screen Print (“S” type plotter has no this function) ............ 77

3.3 How to test Keyboard ........................................................... 78

3.4 How to set up System ........................................................... 79

3.5 System Information ............................................................... 87

4. FISHFINDER (NAVIS-800FS) ............................................................... 88

4.1 Screen Speed ....................................................................... 91

4.2 Noise Erase .......................................................................... 92

4.3 Color Erase ........................................................................... 93

4.4 Tx Power Set ........................................................................ 94

4.5 PULSE WIDTH SET ............................................................. 95

4.6 COLOR PATTERN SET ........................................................ 96

4.7 A-SCOPE SET ...................................................................... 97

4.8 ETC SET ............................................................................... 98

2

5. System Maintenance & Diagnosis ....................................................... 100

1. System Maintenance and Repair ........................................................ 101

2. Diagnosis ............................................................................................. 102

6. Appendix ................................................................................................ 104

Appendix Installation Drawing .............................................................. 104

Failure to avoid the following potentially hazardous situations may result in injury or property

damage.

This device’s electronic chat system(ECS) is developed for the navigational aid only and chart itself does not

obtain any approvals; has not been certified from the government authorities. If operator needs safe

navigation then must use an official chart that has been approved by government agencies; also operator is

fully responsible for using this device.

3

1. GPS PLOTTER

This chapter provides an overview of the GLOBAL POSITIONING SYSTEM (GPS).

1

GPS PLOTTER

4

1. GPS Overview

The Global Positioning System is based on a radio navigational system using satellites. An unlimited number

of users are provided with accurate three-dimensional positions. This 24/7, worldwide coverage, is available

under any weather condition.

GPS can provide two-dimensional and three-dimensional position information. 3D positioning is mostly used

in aircraft or other applications requiring latitude, longitude and altitude. The 3D mode requires a lock on 4

satellites to accurately acquire the position.

Surface vessels use 2D positioning, as only latitude and longitude is needed. In 2D mode, positioning

requires a lock on only 3 satellites to accurately acquire the position.

Once the GPS Plotter has received an accurate fix from the satellites, ship’s position, bearing, time, speed

and other operations can be calculated.

GPS(Global Positioning System) has two types, 3 Dimensional and 2 Dimensional.

3D positional data has been sued in aviation, which requires Latitude, Longitude and Height.

To provide 3D positional data, the system requires 4 satellites.

2D positional data has been used in vessel/ship navigation, which requires only Latitude and Longitude.

To provide 2D positional data, the system requires 3 satellites.

GPS provides an accurate positional data by receiving satellite signals.

GPS chartplotters provide ship position, bearing, time, speed and many more.

Furthermore, plotters provide information for navigation and other data on the map

such as latitude/longitude, tracks, waypoints, event marks and more on high-resolution LCD.

5

2. FEATURES

This chapter provides Features of NAVIS GPS Plotter.

 GPS Antenna & Receiver

 Main Unit Features & Functions

 Standard Components

2

FEATURES

6

1. GPS Antenna & Receiver

2. Main Unit Features & Functions

GPS Antenna

 Type : All-weather Micros trip patch antenna

 Power Supply : Receiver Module

 Size & Weight : 102 x 65mm (+150mm mounting bar) 0.2kg

Receiver

 Receiving Frequency : 1575.42 ± 1MHz

 Receiving Architecture : 16 channel Multiple Tracking

 Receiving Channel : 16channel

 Receiving Code : C/A code(1.023 MHz chip rate)

 Tracking Capacity : 12 simultaneous satellite vehicles

 Receiving Sensitivity : Less than -130 dBm

Positioning

 Tracking Speed : Velocity; 1000Knots (514 m/s)

Acceleration; 4g

 Signal Correction & Tracking : Full Auto(Tracking Micro Computer)

 Accuracy : 15m RMS, PDOP≤3.0 (without SA) - NAVIS 800(GPS)

 Speed Accuracy : 0.1 Knots RMS, PDOP≤3.0 (without SA)

 Data Recovery Time : 1sec

 Initial Positioning Time : 24sec

 Renewal interval of position data : 1sec

Operating Condition

 Temp. : Antenna = -30 C ~ +85 C

Main Unit = -15 C ~ +55 C

 Humidity : 95% (+30 C ~ +60 C)

Main Unit Features

 LCD : 8inch

 Resolution : 640 x 480

 Electricity Power : 12V to +32V DC Approx. 40VA

 Size & Weight : 272 x 219 x 119, 2kg

7

Navigation(1)

 Drawing Method : Mercator’s

 Scale Range : 1/2,500 ~ 1/37,500,000 (about 0.2nm ~ 5,000nm)

 Effective Display Range : Less than Latitude 85°

 Menu : Pull-down Menu

 Coast Line Chart : Display on the Tracking Screen

 Track Display : Memory Interval - Stop Track Memory,

1 sec. ~ 60 min. available.

0.01nm ~ 9.99nm variable selection

Memory Capacity - Track 20,000 points

User’s Line Drawing 7992 points

TRACK Mark – - 100 points

TRACK Color - 16 colors

 Mark Display : Mark type - 21

Color - 16colors

Memory - 10,000points, Distinguish color & delete

User’s Line Drawing Mark 999 points

 Waypoint & Route Memory : 10,000 points & 20 routes(1 route/20 points)

Navigation(2)

 Auxiliary Memory Unit : Coast Line, TRACK, Event, Waypoint,

User’s Line to be saved.

SD card available.

 Data display : Target, Cursor(Distance, Latitude, Longitude), Time,

Course/Speed,

Distance, Interim Waypoint, Bearing/Distance, time,

Warning Line,

Course Break Steering, Depth line of Sea, Fill Land,

Ocean Deep, Sinking Ship/Undersea grasses,

Ownship, Zoom in/out

 Alarm : Arrival Alarm, Course Break, Anchor Alarm, Boundary

 Geodetic Datum : Selectable Datum in worldwide

 Navigation data input/output format : Output/Input

(Other brand’s equipment available)

SAMYUNG, FURUNO, JRC,

NMEA0183(IEC 61162)

 Calendar Display : The Solar Calendar

8

3. Standard Scope of Supply

 NAVIS GPS Plotter (with Fish Finder)

No.

Name

Specification

Q’ty

Remark

1

Main Unit

NAVIS 800S

1EA

FishFinder:NAVIS800FS

2

GPS Antenna

SAN-60

1EA

3

Antenna Cable

RG-58C/U

10m

Option : 20m

4

DC Cable

CVV SB 0.75 SQ MM x 2C

3m

5

Spare Fuse

12V/7A, 24V/3A

2Set

3A:2EA, 7A:2EA

6

Install. Material

1LOT

7

Transducer

50 or 200KHz

or 50/200Khz

1EA

Only Fish Finder

8

Manual

1book

9

Remote Controller

REM-330

(Including Cable * 2m)

1EA

Option

9

3. Device & Display

This chapter provides Device & Display about GPS Plotter.

 Display Device

 Remote Controller

 Power ON/OFF

 Menu

 Plotter Display

3

Device & Display

10

1. Display Device

 F1

function menu

Power 

Power ON/OFF

Remote Controller 

Receiver 

 Switch Button

.N/S, W/E, +/- mutual Switch

.Waypoint Jump & Reverse Navigation Button

.Fish Finder frequency select Low/High

.Soft Key : Mark color, Track color, Erase port,

Sunken Vessel, Fishing Banks, Waypoint, Calendar

 Bright

LCD dimmer control

LCD Day/Night Mode

 Speaker

Button, Alarm sound.

 SD card Slot

- User Data Load/BackUp

.Own ship move to the center

Change Mark type

Track ON/OFF in Plotter Display

Course Up ON/OFF

Waypoint & Route Navigation

Register Waypoint by Cursor

Exit Alarm, Delete Course Line

Switch Display Plotter/Fish Finder

Depth ON/OFF

Zoom IN

.Return to plotter display

.Select MARK/TRACK color, other mode

.Select Gain Menu in the fish finder screen

Cursor

Zoom Out

.Diplay Menu & move to sub menu

.Select, Input, Excution

.Select Mark/Track/Erase/Watch/Sunken Vessel, Banks

.Direction Button

Fish Finder Depth Range Menu.

Pressing twice, Gain Menu

11

 Fish Finder Low/High

Select Low/High Frequency

 GAIN/STC

Adjust GAIN/STC

 D.MODE

Switch Plotter & Fish

Finder

 CNVT

.N/S, W/E switch

.+/- switch

.Waypoint, Reverse-Route Navigation

.Select High/Low in Fish Finder

ENT 

.Select Menu

.Input Data

.Insert Event mark/Erase

8 Direction Button 

Moving Chart, Cursor,

Menu

메뉴커서 이동 등으로 사용

CTR 

.Move ownship to the center

.Move Cursor position to the

center

.Select figures to input

 ESC

.Return plotter from menu

.Cancel Input

TRACK 

Display Track Line

 CORS.UP

Course Up ON/OFF

Zoom IN 

 Zoom OUT

 T/COL

Change Track Color

WPT 

Excute Waypoint & Route

navigation

 ALM/CLR

.Alarm: Clear

.Course: Erase

 EVNT

.Register waypoint by Cursor

 MENU

.Menu diplay ON/OFF

.Move higher menu

CURSOR 

Cursor ON screen

POWER 

Power ON/OFF

 T/ERASE

Erase Track

MARK 

Change Mark type

M/COL 

Change Mark Color

DEPTH 

.Depth ON/OFF

 F1

Select Function

 Dimmer

.LCD dimmer, Transparency

Day/Night Mode

2. Remote Controller Button

※ Remote control is Option device of NAVIS 800 series.

'( )' button part of this manual belongs to Remote Controller .

Depth Range 

Change Depth Range

MOB 

“Man Over Board”

12

3. Power ON/OFF

 Power ON

Press .( )

 Power OFF

Press ( ) and hold approximately 2 sec.

13

4. Menu

1. DATA

1. TRACK DATA

2. MARK DATA

3. USER’S LINE

4. WAYPOINT DATA

5. ROUTE DATA

6. DISK FORMAT

7. SEABED TYPE

2.SET

1. NAVIGATION SET

2. ALARM SET

3. OWN SHIP SET

4. CURSOR SET

5. SHIP TRACKING

6. SIMULATION

7. ETC. SET

3.SYSTEM

1. SATELLIE INFO

2. SCREEN PRINT

3. KEYBOARD TEST

4. SYSTEM SET

5. SYSTEM INFO

4.FISH

1. SCREEN SPEED

2. NOISE ERASE

3. COLOR ERASE

4.TX-POWER SET

5. PULSE WIDTH

6. COLOR PATTERN

7. A-SCOPE SET

5. FAX

1. ROADCAST SET

2. PRINTING SET

3. RECEIVING SET

4, VIEWING DATA

8. ETC. SET

8. PROGRAM UPDATE

14

5. Display mode

Able to choose a wishable display mode by .

 Display mode change at [Plotter Display Only]

 Display mode change at [Plotter/Fishfinder Display]

 GPS Plotter Display

Plotter

Navigation

Fishfinder

Plotter

Navigation

Plotter/Fishfinder

9

2

1

24

5

6

7

11

21

22

25

26

27

28

18

29

12

3

4

8

10

23

13

14

15

16

17

19

20

30

15

No.

Definition

Description

1

Ownship Latitude

Latitude position of ownship’s

2

Ownship Longitude

Longitude position of ownship’s

3

Ownship Speed

Present Ownship’s Speed, SOG(Speed of Ground)

4

Ownship Course

Present Ownship’s Course, COG(Course of Ground)

5

GPS status

If no GPS or DGPS signal, Displays "Not-Ready"

If GPS is received "GPS", and DGPS is received "DGPS"

Simulation『ON』, Displays "SIMULATION"

6

Datum

Present using Datum

7

Trench

The trench ownship is located

8

Present Date

It can be Revised Date in case of “NOT-READY”

9

Present Time

It can be Revised Time in case of “NOT-READY”

(L : Local Time, U : Universal Time)

10

TRACK Record &

Color

TRACK Record & Color, "T" means Track.

TRACK point

Saved current TRACK point

11

MARK

Set current MARK type

MARK q’ty

Saved current MARK q’ty

12

Cursor

Press ( ) button to display on plotter screen

13

Latitude of Cursor

Latitude of current cursor position

14

Longitude of Cursor

Longitude of current cursor position

15

Distance to Cursor

Distance between current position and cursor

16

Bearing

Bearing from ownship to current cursor

17

Trench

The trench ownship is located

18

Width of Display

Real distacnce of width in display

19

Waypoint Nav.

N/A

Route Nav.

Diplay Route number current set

Anchor set

Display “ANCHOR”

20

Way Point

Q’ty of Way Point

21

Waypoint Lat.

Latitude of current waypoint navigation

22

Waypoint Lon.

Longitude of current waypoint navigation

23

Waypoint Distance

Distance from ownship to waypoint

24

Waypoint Bearing

Bearing between ownship and waypoint

25

Estimated Time

Estimated time to arrive from ownship to waypoint

26

Waypoint Speed

Approach speed from ownship to waypoint

27

Course Break

Range of ownship’s Breaking course & Steering

28

Navigation Time

Navigation time to Waypoint

29

Depth

Depth in Fish Finder Operation

30

Compass

Compass Function

16

17

18

 Day/Night Mode in Plotter Display

Press ( ) Open the menu such as Transparency, Day/Night mode.

19

 Navigation Display

In Navigation Display(Press ( ) ), You can see Ownship’s position, Speed, Bearing in full screen

which is helpful for your sailing.

20

 Fish finder Combo Display & Fish finder Display

Page is loading ...

Samyung N800/NF800 Owner's manual

Samyung N800/NF800 Owner's manual

Related papers

Other documents