STEP 2
While squeezing the trigger raise or lower the
clutch/upper shaft to your desired height.
STEP 4
To adjust simply repeat STEPS 1 & 2. When finished,
lower the shaft to its lowest position and release.
STEP 1
Place base on the floor and thread the upright
shaft into the threaded hole in the center of
the base.
STEP 3
Release the trigger and the internal lock engages
for a secure and reliable hold.
2 3
STEP 5 Universal Mic Attachment
To adjust US to metric, use tool provided or
1.5 Allen Wrench to unlock threads. Turn
US threads counter clockwise until it is
removed. US MIC-Lock will come off too.
New CUSTOM mic tops,
shafts, and bases can be
interchangeable to create
your own personal style
with full functionality.
Create your own style with
TOUR or PRO mic stand by
adding a CUSTOM mic top.
Attach a CUSTOM mic top
to a LIVE mic stand for full
functionality and style.
STEP 6 Universal Mic Attachment
After choosing desired thread, place
microphone on universal mic attachment.
Then turn MIC-Lock counter clockwise to
lock mic in place.
SET- UP SET- UP
DETAIL OF CLUTCHES
BLACK CUSTOM MIC TOPS
(
Sold Separately
)
1
US
6
Metric
6
MIC-Lock
LOCKED
LOCKED
MIC-Lock
Mic Tool or
1.5 Allen Wrench
5
US
Metric
US Mic Lock
Venom
Venom
Love Hate
Love Hate
Bring It On Sucka!
Bring It On Sucka!
Dark Magic
Dark Magic
Are You Talkin’ To Me?
Are You Talkin’ To Me?
Smell The Rubber
Smell The Rubber
3 4
2
Shown: Are You
Talkin’ to Me?