12
ARDEN
™
FP8014**
Oscillating
Floor Fan
INSTALLATION REQUIREMENTS:
Motor assembly must be assembled to the wood legs with four 3/16-24x12 mm screws. Lag screws included.
MOTOR SPECS:
82 x 25 motor is designed for optimal performance with this fan.
LOCATION USE:
Fan is rated for dry locations only.
Available Finishes
geL-dooW
OB Oil-rubbed Bronze Walnut
SN Satin Nickel Walnut
20.91˝
43.79˝
43.79˝
0.34˝
0.34˝
18.19˝
10.81˝
10.81˝
14.53˝
24.06˝
24.06˝
50°
Oscillating
Net Weight: 13.1 lbs
ELECTRICAL REQUIREMENTS:
Requires a grounded electrical supply line of 120 volts AC, 60 Hz, 15 amp circuit. 8 ft power cord is included.
FAN SPEED:
3-speed rotating switch (on back of motor). Approximate speeds (depending on blade selection) High—1280 rpm;
Med—970 rpm; Low—830 rpm;
Floor
Motor Assembly
/