Regency I1200 User manual

Regency
Brand
Regency
Model
I1200
Type
User manual
187June 2007 Regency Product Specifi cations Book
Wood Inserts
Wood Inserts
I1200 Wood Insert
I1200 Small Wood Insert
Minimum Fireplace Opening Faceplate Dimensions
Height 19” (483mm) Standard 3 Sided 38” (width) x 26-1/8” (height)
Width 23” (584mm) Standard 4 Sided 38” (width) x 34-1/8” (height)
Depth
Standard Flue Adaptor
13-3/4” (349mm) Oversize 3 Sided 44” (width) x 30-1/8” (height)
Depth
Offset Flue Adaptor
16-1/2” (419mm) Oversize 4 Sided 44” (width) x 38-1/8” (height)
Model I1200S
Cordwood BTU’s 55,000 BTU’s
EPA g/hr 3.0 g/hr
Flue Size 6” (152mm)
6" (152mm) Diameter
STANDARD FLUE ADAPTOR
6" (152mm) Diameter
OFFSET FLUE ADAPTOR
Unit with Standard Flue Adaptor
Unit with Offset Flue Adaptor
188 June 2007 Regency Product Specifi cations Book
Wood Inserts
Wood Inserts
I1200 Wood Insert
Dimension Description I1200
A Adjacent Side Wall (to side) 15” (381mm)
B Mantle (to top)** 20” (508mm)
C Top Facing (to top) 14” (356mm)
D Side Facing (to side) 7-3/8” (187mm)
E Minimum Hearth Extension* 16” (406mm)
F Minimum Heath Thickness* 1-1/2” (38mm)
G Minimum Hearth Side Extension 8” (203mm)
Side and Top facing is a maximum of 1-1/2" thick.
Floor protection must be non-combustible, insulating material with an
R value of 1.1 or greater.
* If the hearth extension is fl ush with the fl oor (F) it must extend
19-1/2" in front of the body face (E).
Note: Hearth Extension Width (G) is measured from edge of fuel
door to side of hearth.
** A non-combustible mantel may be installed at a lower height if the
framing is made of metal studs covered with a non-combustible
board.
I1200 Small Wood Insert
  • Page 1 1
  • Page 2 2

Regency I1200 User manual

Regency
Brand
Regency
Model
I1200
Type
User manual
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents