Hama 00121964 Owner's manual

Type
Owner's manual

Hama 00121964

This device is a smart power strip with a radio foot switch, designed for private, non-commercial indoor use. The power strip has a maximum power output of 16A and can be controlled remotely using the included foot switch.

The foot switch operates on a 433.92 MHz frequency and has a range of up to 30 meters (98 feet). It uses a CR2032 battery and has a learning function that allows it to be paired with the power strip.

To use the device, simply plug the power strip into a standard earthed socket and insert the battery into the foot switch. Then, press and hold the "ON/OFF" button on the power strip for about 3 seconds until the LED flashes, and then press the foot switch. The LED on the power strip will stop blinking when it has successfully learned the frequency.

Hama 00121964

This device is a smart power strip with a radio foot switch, designed for private, non-commercial indoor use. The power strip has a maximum power output of 16A and can be controlled remotely using the included foot switch.

The foot switch operates on a 433.92 MHz frequency and has a range of up to 30 meters (98 feet). It uses a CR2032 battery and has a learning function that allows it to be paired with the power strip.

To use the device, simply plug the power strip into a standard earthed socket and insert the battery into the foot switch. Then, press and hold the "ON/OFF" button on the power strip for about 3 seconds until the LED flashes, and then press the foot switch. The LED on the power strip will stop blinking when it has successfully learned the frequency.

  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16

Hama 00121964 Owner's manual

Type
Owner's manual

Hama 00121964

This device is a smart power strip with a radio foot switch, designed for private, non-commercial indoor use. The power strip has a maximum power output of 16A and can be controlled remotely using the included foot switch.

The foot switch operates on a 433.92 MHz frequency and has a range of up to 30 meters (98 feet). It uses a CR2032 battery and has a learning function that allows it to be paired with the power strip.

To use the device, simply plug the power strip into a standard earthed socket and insert the battery into the foot switch. Then, press and hold the "ON/OFF" button on the power strip for about 3 seconds until the LED flashes, and then press the foot switch. The LED on the power strip will stop blinking when it has successfully learned the frequency.

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI