SB885
For SMART Board 885ix interactive whiteboard systems where the projector is marked with Part No.
03-00157-20 or 03-00157-21, you need the power cable included with your interactive whiteboard to power your
system. This is not necessary for SMART UX60 projectors marked with other part numbers.
• Do not recycle the power cable as illustrated in the installation guide you received with your system.
Instead, use the power cable to power your interactive whiteboard system.
• Powering your interactive whiteboard from the SMART UX60 projector as described in the installation
guide can cause erratic projector behavior.
2
smarttech.com/kb/149616
This document applies only to SMART UX60 projectors that are marked with Part No. 03-00157-20 or
03-00157-21 and that are used with a SMART Board® 885 interactive whiteboard. It does not apply to SMART
UX60 projectors used with SMART Board 685 interactive whiteboards.
Before following the instructions in this document, check the label on the top of your SMART UX60 projector
toconrmthatthepartnumberis03-00157-20or03-00157-21.
SB885
SB885
03-00157-22
100-240V~50-60Hz/3.5A (3,5A)
UX60 03-00157-21
/
/
/
/
/
PS
E
N891
Projector
090898- 12
KTLZU10027-9011
CoretronicProjection(Kunshan)Corporat ion
:
SindoSystemsCo Ltd
:
SN : B012DE1583692
*B012DE1583692*
100-240V~50-60Hz / 3.5A (3,5A)
Coretronic Projection ( Kunshan) Corporat ion
03-00157-21
03-00157-21
03-00157-20
1
SMART Board® 885ix interactive whiteboard system power supply
addendum (projector Part No. 03-00157-20 or -21)